SMT750I Features

  • Intuitive LCD interface
  • Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
  • Predictive replace battery date
  • Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
  • Audible alarms
  • Provide notification of changing flywheel conditions
  • InfraStruXure Central compatible
  • Enables centralized management via APC InfraStruXure Central.
  • SmartSlot
  • Customize UPS capabilities with management cards.
  • Cold-start capable
  • Provides temporary battery power when the utility power is out.
  • Serial Connectivity
  • Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
  • Resettable circuit breakers
  • Enables a quick recovery from overload events.
  • Hot-swappable batteries
  • Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Disconnected battery notification
  • Warns when a battery is not available to provide backup power.
  • Automatic self-test
  • Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Adjustable voltage-transfer points
  • Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
  • Adjustable voltage sensitivity
  • Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Audible alarms
  • Provides notification of changing utility power and UPS conditions.
  • User-replaceable batteries
  • Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • USB connectivity
  • Provides management of the UPS via a USB port (not available on all models).
  • Serial Connectivity
  • Provides management of the UPS via a serial port.
  • Temperature-compensated battery charging
  • Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Boost and Trim Automatic Voltage Regulation (AVR)
  • Gives higher application availability by correcting low and high voltage conditions without using the battery.
  • Intelligent battery management
  • Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Safety-agency approved
  • Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Power conditioning
  • Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Network manageable
  • Provides remote management of the UPS over the network.
  • Adjustable voltage sensitivity
  • Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.
  • Predicitive failure notification
  • Provides early-warning fault analysis ensuring proactive component replacement.
  • Battery replacement without tools
  • Allows quick, easy battery replacement.
  • Front-access servicing
  • Simplifies installation and maintenance while minimizing space requirements.

Smart-UPS Features & Benefits

Availability
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Cold-start capable
Provides temporary battery power when the utility power is out.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Manageability
Network manageable
Provides remote management of the UPS over the network.
Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
LED status indicators
Quickly understand unit and power status with visual indicators.
Serial Connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Serviceability
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Predictive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Resettable circuit breakers
Enables a quick recovery from overload events.
Adaptability
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Field-replaceable power distribution panel
Ensures compatibility with equipment that has different plug types.
Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
 

Output

Output Power Capacity
500Watts /750 VA
Max Configurable Power
500Watts /750 VA
Nominal Output Voltage
230V
Output Voltage Distortion
Less than 5% at full load
Output Frequency (sync to mains)
47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal
Crest Factor
3 : 1
Waveform Type
Sine wave
Output Connections
(6) IEC 320 C13
(2) IEC Jumpers  

Input

Nominal Input Voltage
230V
Input Frequency
50/60 Hz +/- 3 Hz (auto sensing)
Input Connections
IEC-320 C14  
Cord Length
1.83meters
Input voltage range for main operations
160 - 280V
Input voltage adjustable range for mains operation
151 - 302V

Communications & Management

Interface Port(s)
SmartSlot,USB
Available SmartSlot Interface Quantity
1
Control panel
Multi-function LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)
Optional

Surge Protection and Filtering

Surge energy rating
540Joules
Filtering
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical

Maximum Height
161.00mm
Maximum Width
138.00mm
Maximum Depth
363.00mm
Net Weight
13.18KG
Shipping Weight
14.23KG
Shipping Height
301.00mm
Shipping Width
278.00mm
Shipping Depth
499.00mm
Color
Black
Units per Pallet
40.00

Environmental

Operating Environment
0 - 40C
Operating Relative Humidity
0 - 95%
Operating Elevation
0-3000meters
Storage Temperature
-15 - 45C
Storage Relative Humidity
0 - 95%
Storage Elevation
0-15000meters
Audible noise at 1 meter from surface of unit
55.00dBA
Online Thermal Dissipation
90.00BTU/hr

Conformance

Regulatory Approvals
C-tick,CE,EN 50091-1,EN 50091-2,VDE
Standard Warranty
3 years repair or replace (excluding battery) and 2 year for battery
Environmental Compliance
RoHS 7b Exemption,China RoHS,REACH: Contains No SVHCs

No additional files, specification sheets, guides or documentation found for product.

Flexirent

You can finance this product via Flexirent! For more information regarding flexirent, and to use the flexirent finance calculator, please click here.

The calculator provides an indicative rental cost only. Flexirent prices quoted include GST and stamp duty. Subject to credit approval. To obtain full quote and pre-approval please contact Flexirent Customer Service on 1800 240 102. Rental is payable monthly.

Warranty: 3 year return to base

Full manufacturers warranty details are available at the manufacturers (APC) web site.

Unless otherwise specified Techbuy is normally your first point of contact for warranty related returns, further information regarding our warranty policies and consumer guarantees is available on our policies and service & support pages.

To apply for return of a product just go to our returns page.

These terms are in addition to and do not affect any terms, conditions, guarantees and warranties implied by law.

Visitor Reviews

[ There are no visitor reviews for this product yet]

Review Product
Click on a thumbnail to view it below
 
L7: 2 | TM: 3 | LM: 8 | TY: 157 | T: 3543

Secure Online Shopping

We accept the following with No surcharge on VISA, Mastercard and Paypal!
Techbuy Pty Ltd 2000 - 2017 All rights reserved.
All prices shown on techbuy.com.au are in $AUD and inclusive of GST. Prices and availability are subject to change without prior notice. Images displayed are accurate to the best of our knowledge and we will not be held responsible for purchases based soley on these images. All brands and names are trademarks of their respective companies. Shipping Australia wide to all metro and regional areas (Sydney, Melbourne, Brisbane, Adelaide, Perth) and Internationally. For more information, please see our usage policies.