All stock codes associated to this product
WF2220, NEWF2220, NE-WF2220
300Mbps Wireless N Access Point
WF2220
What it does
The netis 300Mbps Wireless N Access Point WF2220 provides long range, high performance wireless Internet access over large areas. It provides you multiple wireless modes including AP, Repeater, WDS, Multi-SSID, for flexible wireless network setup and deployment. Also, with the Turbo button, you may easily control the transmission power. Under the high power mode, you will enjoy much better network experience in large homes, multi-floor offices or warehouses.
Features
High Power
Penetrate Walls and Eliminate Dead Zones
With the advanced high Power Amplifiers (PA) and Low Noise Amplifier (LNA) technology, the 300Mbps wireless N Access Point WF2220 provides powerful Wi-Fi coverage that easily penetrates walls and Wi-Fi obstructions to provide Wi-Fi coverage in hard to reach areas. It is great for larger homes, backyards, offices and warehouses.
Turbo Button
Improve the Signal Strength in a Snap
With the Turbo Button, you may easily improve the signal strength for the router. By pressing the Turbo button for 1 second, the Turbo LED will turn from blue to red, then WF2220 will work in high power mode to boost the signal to the maximum range.
5dBi Deteachable Antenna
Upgradable Antenna for More Wi-Fi Range
The WF2220 features two 5dBi antennas to ensure a wide range across a greater distance. Also, the antennas are detachable, which means they can be replaced with the indoor or outdoor high gain antennas for even more Wi-Fi range or for special installation applications.
Multiple Wireless Modes
Flexible WLAN Solutions
WF2220 supports AP, WDS, Repeater, Multi-SSID(VLAN) modes, providing various wireless solutions. Based on your current network structure, you can flexibly choose a suitable wireless mode to build or extend the wireless network.
Wireless Schedule Function
Smart Online Time Control
WF2220 support wireless schedule function for you to control the wireless online time reasonably. After the correct time setting, you may set the Wi-Fi auto-off during the sleeping time while auto-on in the day time to control the Wi-Fi influence in your house.
Passive PoE
Convenient Way to Build Your Network
The WF2220 can be powered only by an Ethernet cable which transmits data and electricity at the same time. It allows you to locate the Access Point in a position even the power slot is not available. You may feel much convenient to get the best signal and coverage when building the wireless network.
Built-in MetroStyle Web Interface
Easy Setup, Easy Use
WF2220 has built-in MetroStyle web interface to help you understand the device status and setup your wireless connection within seconds. Also with the domain login feature (
https://netisap.cc), you may feel easier to access to the web interface for multiple settings.
Specifications:
| Wireless |
| Standards |
IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Signal Rate |
Up to 300Mbps |
| Frequency Range |
2.4-2.4835GHz |
| Transmit Power |
23dBm(MAX) |
| Data Transfer Rates |
802.11n:
40MHz(300Mbps, 270Mbps, 240Mbps, 180Mbps, 120Mbps, 90Mbps, 60Mbps, 30Mbps)
20MHz (144Mbps, 130Mbps, 115Mbps, 86Mbps, 57Mbps, 43Mbps, 28Mbps, 14Mbps) (Auto-Sense)
801.11g:
(54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 11Mbps, 9Mbps, 6Mbps)
802.11b:
(11Mbps,9Mbps, 6Mbps, 5.5Mbps, 2Mbps, 1Mbps) |
| Wireless Modes |
AP, Repeater,WDS, Multi-SSID(VLAN) |
| Wireless Security |
64/128-bit WEP,
WPA-PSK/WPA2-PSK (TKIP/AES)
SSID Broadcast Enable/Disable
Wireless MAC Filtering |
| Hardware |
| Standards |
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX |
| Interface |
1 * 10/100Mbps Auto MDI/MDIX RJ45 LAN port, Passive PoE Supported |
| LED Indicators |
PWR, Turbo, WPS, LAN
(Turbo LED Status: Blue for Normal Power, Red for High Power) |
| Buttons |
Turbo, Default, WPS |
| Antenna |
2* 5dBi Detachable Antenna, SMA Connector |
| Power Supply |
DC 12V/1A (Output) |
| Software |
| LAN |
DHCP Client, DHCP Server |
| Others |
Time Settings,Firmware Upgrade, Backup & Restore |
| Others |
| Certification |
FCC, CE |
| Environment |
Operating Temperature: 0~40
Storage Temperature: -40~70
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing |
| Package |
1* WF2220
1* 12V/1A Power Adapter
1* PoE Power Injector
1* Ethernet Cable
1* Quick Installation Guide |
Networking
