All stock codes associated to this product
DV2925N, MODDV2925N, MOD-DV2925N, 4716779074604
Overview
NBN (National Broadband Network Australia) Ready to connect to NTD (Network
Termination Device)
2x Gigabit WAN ports & 2 x USB ports for 3.5G / 4G Mobile with Load
Balance and Fail-Over
5x Gigabit LAN ports with 50,000 NAT sessions and IPv6
Object-based SPI Firewall, Content Security Management (CSM) and QoS
50 x VPN tunnels with VPN load balance and redundancy, Central VPN
Management & 25 x SSL VPNs
2 x USB ports for 3.5G / 4G modems, USB disk storage, network printers &
USB temperature sensor
IEEE 802.11n Wireless LAN with Central AP Management *
Support Smart Monitor Traffic Analyzer (up to 50-nodes)
Support TR-069 for VigorACS SI Central Management
Temperature Monitoring (optional: USB Thermometer)
Vigor2925 Series is the IPv6 ready dual WAN broadband security firewall
router.
It ens thurese business continuity for today and the future IPv6
network. Its two gigabit Ethernet WAN port can accept various high-speed
Ethernet-based WAN links via FTTx/xDSL/Cable.
The 2 USB ports are for 3G/LTE mobile broadband access
With the multi-WAN accesses, Vigor2925 series routers provides flexible
and reliable broadband connectivity for the small business office.
The specifications cover many functions that are required by modern day
businesses, including secure but easy to apply firewall, comprehensive VPN
capability, Gigabit LAN ports, USB ports for 3G/LTE mobile dongles, FTP servers
and network printers, VLAN for flexible workgroup management, and much
more.
The VPN backup and VPN load balancing assures business continuity via
multi-WAN connection to the Internet. The bandwidth management, Quality of
Service, VLAN for flexible workgroup management, User Management for
authentication, Route Policy, Central VPN Management, Central AP Management and
Firewall serve your daily office network to bring in more business
opportunities
Dual Gigabit Ethernet WAN ports for failover and
load-balancing
The Gigabit Ethernet WAN ports cater for any type of Internet access,
including FTTx, xDSL and Cable fitting your local infrastructure. You can then
use both WAN 1 and WAN 2 for failover, ensuring that you will always have an
access to the Internet even if one of the WAN fails, or for load-balancing so
the 2 WANs share Internet traffic requirements of your organization.
2 USB 2.0 ports for 3G/LTE mobile, FTP drive and network
printer
The two USB ports can be used for the connection of 3G/LTE dongle, FTP
drive and network printers.
A 3G/LTE connected to one of the 2 USB ports can be used as a second WAN
for bandwidth management.
The USB WAN interface can also be the primary access if the local fixed
line service hasnt been deployed yet.
You have 2 USB for 3G/LTE dongle connect to the USB ports, and assign
one of these (WAN 3) to be the primary access and the other (WAN 4) as the
fail-over back-up. And, you have the flexibility to convert back to fixed line
services when these become available.
The access can be using username and password or public. Each of them
can have their own directories and/or file access rights.
Flexible Network Management
Like all DrayTek routers, Vigor2925 Series routers support comprehensive
network management functions. For example, you can set username/password and
directory/file access privilege for individual users as required. There are also
routing/network tables, system log, debugging utilities, etc., making network
administrators' jobs easy.
Other management features include SNMP, TR-069 and TR-104. TR-069 can be
utilized with DrayTek's VigorACS SI management software to remotely monitor and
manage the Vigor2925 series.
There are many nodes of license for deploying VigorACS SI Central
Management. Through Self-hosted or Cloud-based subscription, the
remotely-deployed DrayTek Vigor routers can be managed for firmware upgrade, VPN
establishment, real-time monitoring and obtain proper customer care.
Supports Smart Monitor traffic report
software
Vigor2925 series routers support Smart Monitor, DrayTek's proprietary
network traffic reporting software, for up to 50 users. This software monitors
all incoming and outgoing network traffic, categorizes these into various
activity and data types and provides statistics in various report types, so
network administrators can monitor network activities for planning and/or fault
locating purposes.
Central AP Management
APM provides the 3-step installation, plug-plug-press, and then wireless
clients are able to enjoy surfing internet. Moreover, through the unified user
interface of Draytek routers, the status of APs is clear at the first
sight.
If your network requires several VigorAP900 or VigorAP 810 units, to
centrally manage and monitor them individually as a group will be expected.
DrayTek central wireless management (AP Management) lets control, efficiency,
monitoring and security of your company-wide wireless access easier be managed.
Inside the web user interface, we call central wireless management as
Central AP Management which supports mobility, client monitoring/reporting and
load-balancing to multiple APs. For central wireless management, you will need a
Vigor2860 or Vigor2925 series router; there is no per-node licensing or
subscription required.
For multiple wireless clients, to apply the AP Load Balancing to the
multiple APs will manage wireless traffic with smooth flow and enhanced
efficiency.
Centralized Management
With F/W 3.7.4, the embedded Central VPN Management (CVM) will let
network administrator register up to 16 remote routers but run concurrent remote
management over 8 remote routers.
Multi-subnets ( Multiple Private LAN Subnets
)
With the 5-port Gigabit switch on the LAN side, the Gigabit LAN switch
provides extremely high speed connectivity for the highest speed local data
transfer of any server or local PCs. The tagged VLANs (802.1q) can mark data
with a VLAN identifier. This identifier can be carried through on onward
Ethernet switch to specific ports. The specific VLAN clients can also pick up
this identifier as it is just passed to the LAN. You can set the priorities for
LAN-side QoS. You can assign each of VLANs to each of the different IP subnets
that the router may also be operating, to provide even more isolation. The said
functionality is tag-based multi-subnet.
Each of the wireless SSIDs can also be grouped within one of the VLANs.
*Except Vigor2925
With multi-subnet, the traffic can be sent through non-NAT mode with
higher performance. If you deploy Vigor2925 series with MPLS network with your
main office, the multi-subnet settings will let your data transactions be
carried out without NAT.
Comprehensive VPN
For remote teleworkers and inter-office links, Vigor2925 series provide
up to 50 simultaneous VPN tunnels (such as IPSec/PPTP/L2TP protocols) for secure
data exchange and communication. With a dedicated VPN co-processor, the hardware
encryption of AES/DES/3DES and hardware key hash of SHA-1/MD5 are seamlessly
handled, thus maintaining maximum router performance. Teleworkers can be
authenticated directly with your LDAP server if preferred. The Vigor2925 series
are equipped with two Gigabit Ethernet ports and USB WAN ports for WAN
load-balancing and backup. The VPN trunking (VPN load-balancing and VPN backup)
are hence implemented on Vigor2925 series. With VPN trunking, you can create
multiple WAN connections to a remote site in order to increase bandwidth. The
VPN trunking also can allow you to have failover (backup) of VPN route through a
secondary WAN connection.
With SSL VPN, Vigor2925 series let teleworkers have convenient and
simple remote access to central site VPN. The teleworkers do not need to install
any VPN software manually. From regular web browser, you can establish VPN
connection back to your main office even in a guest network or web cafe. The SSL
technology is same as the encryption that you use for secure web sites such as
your online bank. The SSL VPNs can be operated in either full tunnel mode or
Proxy mode.
For client-to-site, remote dial-in users can use up-to 25 SSL VPN
tunnels to avoid the local network infrastructure limitation, , there are 64
profiles on WUI, but it only allows 25 concurrent tunnels.
Up to 50 VPN tunnels are supported, each can be set to
IPsec/PPTP/L2TP/L2TP over IPsec protocols, with hardware encryption of
AES/DES/3DES. This level of VPN capability covers the requirements of most
businesses for secure inter-office and remote data accessing. For the
site-to-site application, Vigor2925 Series offers VPN load-balancing &
backup to deliver the high performance and reliable remote access. For
client-to-site, remote dial-in users can use up-to 25 SSL VPN tunnels to avoid
the local network infrastructure limitation, there are 64 profiles on WUI, but
it only allows 25 concurrent tunnels.
VLAN for secure and efficient workgroup
management
Not only with 5 x Gigabit LAN ports for the needs of unified
communication applications, such as CRM server, FTP server, Mail server, the
Vigor2925 Series has the comprehensive VLAN function for management. The VLAN
functions allow 5 subnets to be allocated for multiple workgroups. When combined
with the NAT and firewall functions, you can design corporate network groups in
terms of traffic, security level, priority settings, etc.
Applications such as VoIP, IPTV and Wireless SSID can also be integrated
into VLAN tags and firewall objects, giving you the maximum flexibility in
designing workgroups for your organization.
Object-based SPI Firewall for network
security
Like all DrayTek routers, Vigor2925 Series supports Object-based SPI
firewall and CSM (Content Security Management). The firewall allows setting of
Call/Data Filters and DoS prevention, whereas the CSM covers IM/P2P/Protocol
filter, URL Content Filter and Web Content Filter.
With Objects settings, you can pre-define objects or groups for IP,
service type, keyword, file extension, etc., and mix these with the Time
Scheduler or the VLAN groups as required. Altogether this gives you peace of
mind whether you are guarding a complicated network or a small office.
Embedded IEEE 802.11n WLAN (2.4GHz)* Except
Vigor2925
Vigor2925 series ( except Vigor2925 ) has a built-in IEEE 802.11n WLAN
Access Point. The Wi-Fi access is also protected by security and encryption
protocols, including WEP/WPA/WPA2, MAC Address Control, Multiple SSID, Wireless
LAN Isolation, Wireless VLAN and 802.1x Authentication.
The Wireless Rate Control function allows connection rates for each
network device to be individually managed as required. The WMM (Wi-Fi
Multi-Media) function allows setting of priority levels for various
applications: voice, video, data, etc., so time-critical applications can be
assigned higher priority levels. Furthermore, WDS (Wireless Distribution System)
function allows you to extend the wireless coverage distance easily.
Concurrent dual-band 802.11ac WLAN (2.4/5GHz
frequency)
The Vigor2925ac and Vigor2925Vac are equipped IEEE 802.11ac wireless
access point which can run 300Mbps @ 2.4GHz and 1300 Mbps @5GHz 11ac).
The Wireless Rate Control function allows connection rates for each
network device to be individually managed as required. The WMM (Wi-Fi
Multi-Media)* function allows setting of priority levels for various
applications: voice, video, data, etc., so time-critical applications can be
assigned higher priority levels. Furthermore, WDS (Wireless Distribution System)
function allows you to extend the wireless coverage distance easily.
Specifications
Hardware
Interface |
2 x 1000Base-TX, RJ-45
(WAN1/WAN2) |
|
5 x 10/100/1000Base-TX
LAN, RJ-45 |
|
2 x Detachable Antennas
(n model) |
|
3 x Detachable Antennas
(n-plus,ac Model) |
|
2 x FXS and 1 x Life
Line Port, RJ11 (V Model) |
|
2 x USB Host
2.0 |
|
1 x Factory Reset
Button |
|
1 x Wireless On/Off/
WPS Button |
Wi-FiFrequency |
11b/g/n: |
|
2.412~ 2.462GHz
(USA) |
|
2.412~ 2.472GHz (Europe
ETSI) |
|
11a/an/ac: |
|
5.150 5.250 & 5.725
5.825 GHz (USA) |
|
5.150 5.250 & 5.470
5.725GHz (Europe ETSI) |
Wireless Transmit
Power |
2.4GHzMax:19
dBm |
|
5 GHz Max:21
dBm |
Temperature |
Operating : 0C ~
45C |
|
Storage : -25C ~
70C |
Humidity |
10% ~ 90% (
non-condensing ) |
Power
Adapter |
DC 12V / 1.5A ( 2925,
2925n, 2925n plus, 2925Vn plus ) |
|
DC 12V @ 1.5A ~ 2A (
2925ac, 2925Vac ) |
Max.
Power |
10 Watt ( 2925
) |
|
15 Watt ( 2925n
) |
|
17 Watt ( 2925n plus,
2925Vn plus ) |
|
24 Watt ( 2925ac,
2925Vac ) |
Dimension |
L241 * W165 * H44
(mm) |