All stock codes associated to this product
CLW021OS00BUA, CL-W021-OS00BU-A
Overview
Coolant 1000 Blue
The Thermaltake Coolant 1000 Series was formulated with the perfect
combination of cooling performance and anti-corrosive protection. Premixed with
no need for additional additives, this high performance coolant protects each
component while providing optimal flow throughout the system.
The Coolant 1000 is made in Taiwan, and available in various colors: Green,
Red and Blue with 2-year shelf-life; brighten up any build with Thermaltake.
Tt LCS Certified is the hallmark that ensures first-class performance from
the best features and fitment. A certification exclusive to Thermaltake, it sets
the benchmark for all true LCS chassis and is applied only to products that meet
our stringent design standards for delivering what hardcore enthusiasts demand.
The Tt LCS certification is a way for Thermaltake to designate to all power
users the chassis which have been tested for best compatibility with extreme
liquid cooling configurations.
Eco-friendly Anti-corrosive Solution
Being non-toxic and non-flammable, the Coolant 1000 is an eco-friendly
pre-mix solution with 2 years shelf life, providing great performance while
preventing the entire cooling system – copper, brass, nickel, aluminum, and
steel – from corrosion. In addition, users can easily refill by using the refill
bottle.
- Boiling Point: 210.2 (99)
-
Freezing Point: -4 (-20) Composition of Coolant 1000 as below:
Refill Bottle as below:
Easy Application
Thermaltake Coolant 1000 is designed specifically for PC liquid cooling
systems. The features of the Coolant 1000 include anti-freezing, anti-rusting,
and water scale prevention. This coolant can reduce the temperature of the
system effectively and further enhance the thermal efficiency.
Caution:
May be harmful if swallowed, may cause birth defects. May cause
respiratory tract, eye and skin irritations. Keep out of reach of
children. Avoid breathing any vapors or spray mists. Use with adequate
ventilation. Avoid contact with skin and eyes. Keep container tightly closed
when not in use. Wash thoroughly after handing. Store in a cool place.
Thermaltake recommends the following steps to be taken after completing your
water loop setup:
- It is strongly recommended to use market proven pre-mix coolant, such as
Thermaltake Coolant 1000. It offers great performance while preventing the
entire cooling system copper, brass, nickel, aluminum, and steel from
corrosion.
- Fill the reservoir with coolant and cycle the power on and off several
times while the pump pushing the coolant into the loop.
- DO NOT let the pump run dry, when there is no liquid entering the pump
turn off your power immediately
- Fill the reservoir to the top as it will prevent air from going into the
pump
- If necessary tilt the system slightly from side to side to bleed the air
out of the loop.
- Place some paper towels under fittings and joining points to test for
leaks.
- Run the loop with the fill port open for about 24 hours to completely
bleed the air out of the loop
- Before starting, flush out your system correctly to prevent any coolant or
unwanted particles sticking to your tubes, radiators and other cooling
components.
- Coolant might fade over time.
Specifications
|
P/N |
CL-W021-OS00BU-A |
|
Capacity |
1000 ml |
|
Color |
Blue |
|
Major Material / Major Material Ingredient |
Water~94% |
|
Propylene Glycol ~6% |
|
Other materials: |
|
1. Ethylene diamine tetra acetate detetrasodium (ED
.TA.4Na)0.1% |
|
2. Methy paraben (M.P) 0.1% |
|
3. Color pigment
0.002% |
