All stock codes associated to this product
CLW083PL00BLA, CL-W083-PL00BL-A
Overview
Pacific PR22-D5 Silent Kit Reservoir/Pump Combo
Thermaltake launches the Pacific PR Series tube reservoir and D5 pump for the
ultimate in custom PC watercooling configurations. Featuring exceptional
performance and unrivalled reliability, the PR22-D5 w/ Mod Kit is manufactured
from high quality POM and PMMA material to provide a crystal clear, high
performance, durable solution. By giving users ideal mounting, fitting and flow,
the PR22-D5 w/ Mod Kit is the right choice for PC enthusiasts. Make your system
a showcase for all to see with the Thermaltake Pacific PR Series.
Tt LCS Certified is the hallmark that ensures first-class performance from
the best features and fitment. A certification exclusive to Thermaltake, it sets
the benchmark for all true LCS chassis and is applied only to products that meet
our stringent design standards for delivering what hardcore enthusiasts demand.
The Tt LCS certification is a way for Thermaltake to designate to all power
users the chassis which have been tested for best compatibility with extreme
liquid cooling configurations.
*PR15-D5 water flow diagram
Aluminum Sound Proofing Kit
Made in Taiwan, PR22-D5 w/ Silent Kit top cap supports rubber washers for a
proper seal, including two predrilled G1/4” ports for fittings. The aluminum kit
reduces noise, playing a role as shock absorber. Noise is reduced by 10% with
aluminum kit in 17mm thickness.
Featuring 6mm thick of the pipe wall, Pacific PR Series can sustain the
maximum pressure up to 99 PSI (Pounds per square inch). Also, users can easily
open out the top cap, cleaning the reservoir thoroughly.
Ultimate Speed Controller and High-lift Pumping
The PR22-D5 w/ Silent Kit is designed with a manual speed control knob to
provide five speeds. Maximum discharge up to 1135L/hr provides high-performance
cooling to your components. High-lift pumping of the pump head reaches up to 15
feet high at the maximum speed. Enthusiasts can build up advanced liquid cooling
loop, two GPUs, three radiators, or even more DIY components at the same
time.
The pump is compatible with Thermaltake Pacific Series reservoirs and
fittings, further increasing system performance, providing ultimate control for
your water cooling system.
*PR15
Heat-resistant Acrylic Tank
The Pacific PR Series tube reservoirs are all made of reliable, light
weighted POM and PMMA construction, which is crystal clear and highly durable.
High quality acrylic (PMMA) tube maximum working temperature: 13F (5C).
Easy and Flexible Application
Along with two brackets connected to both ends, Pacific PR Series is solid
hold inside the chassis and allows enthusiasts to build up superior water
cooling system from an aesthetic standpoint and incorporate externally-modular
upgrades for their chassis. The Pacific PR Series can be installed either
horizontally or vertically, making the chassis out of the ordinary!
Cautions:
Thermaltake recommends the following steps to be taken after completing your
water loop setup:
- It is strongly recommended to use market proven pre-mix coolant, such as
Thermaltake Coolant 1000. It offers great performance while preventing the
entire cooling system copper, brass, nickel, aluminum, and steel from
corrosion.
- Fill the reservoir with coolant and cycle the power on and off several
times while the pump pushing the coolant into the loop.
- DO NOT let the pump run dry, when there is no liquid entering the pump
turn off your power immediately
- Fill the reservoir to the top as it will prevent air from going into the
pump
- If necessary tilt the system slightly from side to side to bleed the air
out of the loop.
- Place some paper towels under fittings and joining points to test for
leaks.
- Run the loop with the fill port open for about 24 hours to completely
bleed the air out of the loop
- Before starting, flush out your system correctly to prevent any coolant or
unwanted particles sticking to your tubes, radiators and other cooling
components.
- Coolant might fade over time.
Specifications
P/N |
CL-W083-PL00BL-A |
Dimension |
94.1 (L) x 78 (W) x
309.7 (H) |
Material |
POM+
PMMA |
Capacity |
300
ml |
Maximum
head |
15 feet
(4.5m) |
Maximum Flow
Rate |
1135
L/h |
Maximum
pressure |
50
PSI |
Input
Voltage |
8 ~ 24
V |
Connector |
4
Pin |
Pump
Speed |
P1: 1,800
RPM |
P2: 2,550
RPM |
P3: 3,300
RPM |
P4: 4,050
RPM |
P5: 4,800
RPM |
Screw
Thread |
G
1/4 |
Parts |
1. Stopper *1 (G 1/4
) |
2. Bracket
*2 |
3. Clip
*2 |