All stock codes associated to this product
CLW117CU00WTA, CL-W117-CU00WT-A
Overview
Pacific V-GTX 9 Series Reference Design
Thermaltakes new Pacific V-GTX 9 Series Reference Design Water Block is a
full cover water block. Compatible with NVIDIA Geforce GTX 980/970, it delivers
the ultimate in cooling performance. Featuring 0.7mm internal fin construction,
the Pacific V-GTX Series is manufactured with CNC machined copper base, fits
most of G1/4 fittings. A universal mounting mechanism offers error-free,
tool-less installation, and compatibility for custom PC builders.
Tt LCS Certified is a Thermaltake exclusive certification applied only to
products that pass the design and hardcore enthusiasts standards that a true LCS
chassis should hold to. The Tt LCS certification was created so that we at
Thermaltake can indicate to all power users which chassis have been tested to be
best compatible with extreme liquid cooling configurations, ensuring you get the
best performance from the best features and fitment.
Mirror Finish CU Base
The Pacific V-GTX 9 Series Reference Design Water Block’s specially machined
copper base prevents corrosion and fully complies with Thermaltake’s highest
quality standards. The mating surface to the CPU has a mirror finish, providing
exceptional heat transfer for the most demanding use conditions.
High Water Flow Design
The coolant flow path includes all critical components. Proper cooling of
these components contributes to overclocking stability and reliable operation.
The block covers the entire PCB, leaving no components exposed to possible
damage during handling.
Unique Micro-Channel Structure
Manufactured in Taiwan, the Pacific V-GTX 9 Series Reference Design Water
Block is designed with a compact form factor featuring 0.7mm micro-channel fin
construction for optimal clearance and extreme heat dissipation. The copper base
fits most G1/4 fittings.
Remarkable Expansion
Designed to fit NVDIA Geforce GTX 980/970 with a universal mounting
mechanism, the Pacific V-GTX 9 Series Reference Design allows enthusiasts to
build superior water cooling systems from an aesthetic standpoint as well as
incorporate modular chassis upgrades for the future.
Caution
Thermaltake recommends the following steps to be taken before using the
Pacific series radiators and water blocks:
- To ensure a clean loop, flush and rinse your radiators and water blocks
with distilled water prior to use.
- Do not use tap water or distilled water as your coolant, it may harm your
loop and reduce performance.
- It is strongly recommended to use market proven pre-mix coolant, such as
Thermaltake Coolant 1000. It offers great performance while protecting the
entire liquid loop from corrosion.
- Before storing your water cooling components, please clean, rinse and dry.
This will ensure a longer lifespan for your components.
Thermaltake recommends the following steps to be taken after completing your
water loop setup:
- It is strongly recommended to use market proven pre-mix coolant, such as
Thermaltake Coolant 1000. It offers great performance while preventing the
entire cooling system copper, brass, nickel, aluminum, and steel from
corrosion.
- Fill the reservoir with coolant and cycle the power on and off several
times while the pump pushing the coolant into the loop.
- DO NOT let the pump run dry, when there is no liquid entering the pump
turn off your power immediately
- Fill the reservoir to the top as it will prevent air from going into the
pump
- If necessary tilt the system slightly from side to side to bleed the air
out of the loop.
- Place some paper towels under fittings and joining points to test for
leaks.
- Run the loop with the fill port open for about 24 hours to completely
bleed the air out of the loop
- Before starting, flush out your system correctly to prevent any coolant or
unwanted particles sticking to your tubes, radiators and other cooling
components.
- Coolant might fade over time.
Specifications
P/N |
CL-W117-CU00WT-A |
Compatibility |
NIVDIA Geforce GTX 980 970 |
Dimension |
239 L x 98.2 W x 16.7 H mm |
Material |
Copper + POM |
Threads |
G |
Weight |
860 g |