All stock codes associated to this product
CLW024AL00BLA, CL-W024-AL00BL-A
Overview
- The Thermaltake Pacific R360S radiator introduces high-quality radiators
to deliver outstanding water cooling performance for the enthusiasts PC.
Manufactured from high-quality German zinc alloy aluminum and aerospace-grade
materials, configurations of 180mm, 360mm, and 540mm are available to provide
exceptional performance. Integrated G1/4" threads make it easy to install,
while rigid connections ensure leak-resistant measures are in place. With an
ideal mounting, fitting and flow set-up, the Thermaltake Pacific R360S meets
your cooling needs in every way.
- Tt LCS Certified is the hallmark that ensures first-class performance from
the best features and fitment. A certification exclusive to Thermaltake, it
sets the benchmark for all true LCS chassis and is applied only to products
that meet our stringent design standards for delivering what hardcore
enthusiasts demand. The Tt LCS certification is a way for Thermaltake to
designate to all power users the chassis which have been tested for best
compatibility with extreme liquid cooling configurations.
Optimized Heat Dispatching
- Designed for the most demanding hardcore enthusiasts, the Thermaltake
R180S radiator is optimized for maximum heat dispatching. They deliver an
average heating load of 32?-35? on each radiator. After brazing, the fin and
tube connect to form a joint, thereby creating uniform heat transfer. By
efficiently pulling heat away from the power-dissipating components, the
radiators ensure component reliability.
Slim Form Factor Design
- The Pacific R180S is a slim radiator with a 13-set flat tube design to
increase heat transfer. Water flows down on the one side, then circulates back
to the other side of the radiator.
High-Density Fin Design
- Fin density is optimally designed to accommodate high air pressure. The
cooling performance improves significantly with increased fan speed, offering
exceptional cooling performance during operation. FPI (fin per inch):
13.
German-Made Anti-Corrosion Materials
- Without compromise, the Pacific R180S is designed with high-quality German
aerospace-grade materials and constructed with zinc, the most common
anti-corrosion agent. Although this protection will gradually degrade as the
zinc corrodes away over time, it provides the best means to reduce electronic
conductivity and can withstand scratches to the zinc layer. Corrosion
potentials of zinc alloy aluminum can be reduced by 55.6% after
brazing.
High-Quality Manufacturing Process: Brazing
- An exceptional manufacturing process using high temperature brazing at
1022?/550? sets Pacific R180S in a class of their own. This technique allows
for impurities to be kept out of the brazing process, ensuring that full
strength on all the connected areas is achieved. The radiators are baked
through a controlled atmosphere brazing line. The materials melt into each
other to accomplish optimal thermal transfer from the tubes to the actual fins
in order to attain better heat evacuation.
Remarkable Expansion
- The Pacific R180S provides multiple sizes for users to build the ultimate
in custom configurations. A wide array of radiator sizes are available for
enthusiasts to build up aesthetically-superior water cooling systems by
allocating the radiators to each particular component and incorporating
externally-modular upgrades for their chassis.
Cautions:
Thermaltake recommends the following steps to be taken before using the
Pacific series radiators and water blocks
- To ensure a clean loop, flush and rinse your radiators and water blocks
with distilled water prior to use.
- Do not use tap water or distilled water as your coolant, it may harm your
loop and reduce performance.
- It is strongly recommended to use market proven pre-mix coolant, such as
Thermaltake Coolant 1000. It offers great performance while protecting the
entire liquid loop from corrosion.
- Before storing your water cooling components, please clean, rinse and dry.
This will ensure a longer lifespan for your components.
Thermaltake recommends the following steps to be taken after completing your
water loop setup
- It is strongly recommended to use market proven pre-mix coolant, such as
Thermaltake Coolant 1000. It offers great performance while preventing the
entire cooling system copper, brass, nickel, aluminum, and steel from
corrosion.
- Fill the reservoir with coolant and cycle the power on and off several
times while the pump pushing the coolant into the loop.
- DO NOT let the pump run dry, when there is no liquid entering the pump
turn off your power immediately
- Fill the reservoir to the top as it will prevent air from going into the
pump
- If necessary tilt the system slightly from side to side to bleed the air
out of the loop.
- Place some paper towels under fittings and joining points to test for
leaks.
- Run the loop with the fill port open for about 24 hours to completely
bleed the air out of the loop
Specifications
P/N |
CL-W024-AL00BL-A |
Dimension |
415.3(L) x 179 (W)
x 36 (H) |
Weight |
800
g |
Material |
Anti-Corrosion |
Aluminum
Alloy |
FPI (Fin per
inch) |
13 |
Flat
Tube |
18
set |
Screw
Thread |
G 1/4 *
4 |
Parts |
Stopper * 2 (G 1/4
) |