The EdimaxGS-1008P V2is anEight PoE+ Port Gigabit switchdesigned for use in
home, small or medium sized network environments. With eight DIP switches, PoE
ports can be manually set with on/off control, extending PoE delivery distance
up to 200 meters and port-based on/off control for VLAN and QoS is also
supported. The switch easily connects and supplies power to PoE-enabled devices
such as wireless access points, network cameras and IP phones as well as other
Ethernet-enabled devices such as computers, printers or network attached storage
(NAS). The compact size and fan-less design make the switch an ideal solution
for expanding home and small business networks.
Power over Ethernet (PoE+) Auto Detection
Features
eightIEEE 802.3at Power over Ethernet (PoE+) ports which supply up to 30 watts
of electricity per port. It can convert standard 100240V AC power into
lowvoltage 50 - 57V DC electricity to power IEEE 802.3at compliant network
accessories via existing LAN cables. With PoE detection capability, theGS-1008P
V2is able to verify whether the connected device is IEEE 802.3at compliant. In
the event that a PoE device is not detected, only network data will be
transmitted through the LAN cable meaning easy setup and management of network
devices such as access points and network cameras.
*IP Phone: 3 - 7W, IP Camera: 7 - 10W PZT Camera: 15 - 25+ W . Access Point:
8W for 802.11a/g radios; upwards of 20W for 802.11n radios
The guidelines are
meant to provide general estimates for power consumption. Actual power
requirements vary and should be confirmed for each model when determining your
PoE budget requirements.
CCTV Mode
The unique CCTV-mode DIP switch function is ideal for
surveillance networking environment. Switching all DIP switches to on enables
CCTV mode which gives multi-function PoE + data extension, Port Isolation and
QoS on theGS-1008P V2. When using video surveillance systems for homes, business
or institutions, the CCTV mode provides better speeds for multicast viewing and
easier installation. Setting all DIP switches back to off quickly changes
theGS-1008P V2back to normal for general-use data transmission.
Power and Data Distance Extension
The built-in DIP switch
provides extended operation modes on switch 1, 2, 5, 6 & 7. TheGS-1008P
V2operates as a standard IEEE 802.at/af PoE Switch when DIP switches are off.
With switches on, theGS-1008P V2operates on a per-port basis at 10Mbps duplex
operation but can support 30-watt PoE power output over a distance of up to 200
meters, overcoming the 100m limit on Ethernet UTP cables. With this brand-new
feature, theGS-1008P V2provides an additional solution for 802.3at/af PoE
distance extension and saves costs of Ethernet cable installation.
Innovative Port-based VLAN Features
TheGS-1008P
V2features port-based VLAN where ports can be isolated from each other via DIP
switch port 3 & 8. This can help to prevent IP cameras multicast or
broadcast storms from affecting each other.
* Ports 1, 2, 3, 4 can connect to uplink ports 5, 6, 7, 8.
* Ports 5, 6, 7
can connect to uplink ports 1, 2, 3, 4, 8.
Hardware QoS for Video & Voice Traffic
Priority
Supports 802.1p QoS via DIP switch port 4. This ensures
first priority for video and voice traffic.
Plug & Play, No Installation Required
Just plug
Ethernet or PoE enabled devices into the switch. Data and power can be
transmitted through existing standard Cat-5e Ethernet cables with no additional
cables or configuration required.TheGS-1008P V2reduces the difficulty, time and
cost of network setup.
Flexible Network
Deployment & Energy Efficient
A fast and
effective solution when power outlets are unavailable for your network devices.
The switch additionally supports IEEE 802.3az Energy Efficient Ethernet which
allows for less power consumption and reduced costs during periods of low data
activity.
Fan-less Quiet & Compact Design
A fan-less design
ensures quiet operation and enables an even more compact design, keeping
valuable desk space free in home or small office environments.
APPLICATION DIAGRAM
Networking
