Hardware |
|
Copper Ports |
8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
PoE Injector Port |
4 ports with 802.3af/802.3at PoE injector function (Port-1 to
Port-4) |
Console |
1 x RS232-to-RJ45 serial port (115200,8, N, 1) |
Switch Architecture |
Store-and-Forward |
Switch Fabric |
16Gbps/non-blocking |
Switch Throughput@64 bytes |
11.9Mpps@64 bytes |
MAC Address Table |
8K entries |
Shared Data Buffer |
4.1 megabits |
Flow Control |
IEEE 802.3x pause frame for full-duplex |
|
Back pressure for half-duplex |
Jumbo Frame |
10 Kbytes |
Reset Button |
< 5 sec: System reboot |
|
> 5 sec: Factory default |
LED |
3 x LED for System and Power: |
|
Green: DC Power 1 |
|
Green: DC Power 2 |
|
Green: Power Fault |
|
2 x LED for PoE Copper Port (Port-1~Port-4): |
|
Green: LNK/ACT |
|
Orange: PoE-in-use |
|
2 x LED for 10/100/1000T Copper Port
(Port-5~Port-8): |
|
Green: LNK/ACT |
|
Orange: 1000Mbps |
|
4 x LED for PoE Power Usage (W) |
|
Orange: 30, 60, 90 and 120W |
Connector |
Removable 6-pin terminal block |
|
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power
2 |
Alarm |
One relay output for power failure. Alarm relay current carry ability:
1A @ 24V AC |
Power Requirements |
48~56V DC, 3.5A (max.) |
Power Consumption/ Dissipation |
5.04 watts, 17.1BTU (Standby without PoE function) |
|
7.28 watts, 23 BTU (Full loading without PoE
function) |
|
151.28 watts, 516.1 BTU (Full loading with PoE
function) |
Dimensions (W x D x H) |
161 x 107 x 72 mm |
Weight |
1001g |
ESD Protection |
6KV DC |
Enclosure |
IP30 aluminum case |
Installation |
DIN-rail kit and wall-mount ear |
Power over Ethernet |
|
PoE Standard |
IEEE 802.3af/802.3at Power over Ethernet PSE |
PoE Power Supply Type |
End-span |
PoE Power Output |
IEEE 802.3af Standard |
|
- Per port 48V~56V DC (depending on the power supply), max. 15.4
watts |
|
IEEE 802.3at Standard |
|
- Per port 50V~56V DC (depending on the power supply), max. 36
watts |
Power Pin Assignment |
1/2(+), 3/6(-) |
PoE Power Budget |
144 watts (depending on power input) |
Max. Number of Class 2 PD |
4 |
Max. Number of Class 3 PD |
4 |
Max. Number of Class 4 PD |
4 |
Layer 2 Functions |
|
Port Mirroring |
TX/RX/Both |
|
Many-to-1 monitor |
VLAN |
802.1Q tagged-based VLAN |
|
Up to 256 VLAN groups, out of 4094 VLAN IDs |
|
802.1ad Q-in-Q tunneling (VLAN stacking) |
|
Voice VLAN |
|
Protocol VLAN |
|
Private VLAN (Protected port) |
|
GVRP |
|
Management VLAN |
Link Aggregation |
IEEE 802.3ad LACP and static trunk |
|
Supports 4 groups with 4 ports per trunk |
Spanning Tree Protocol |
IEEE 802.1D Spanning Tree Protocol (STP) |
|
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) |
|
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) |
|
STP BPDU Guard, BPDU Filtering and BPDU Forwarding |
IGMP Snooping |
IPv4 IGMP snooping v2, v3 |
|
IGMP querier |
|
Up to 256 multicast groups |
MLD Snooping |
IPv6 MLD snooping v2, v3, up to 256 multicast
groups |
Access Control List |
IPv4/IPv6 IP-based ACL/MAC-based ACL |
|
IPv4/IPv6 IP-based ACE/MAC-based ACE |
QoS |
8 mapping IDs to 8 level priority queues |
|
- Port number |
|
- 802.1p priority |
|
- DSCP/IP precedence of IPv4/IPv6 packets |
|
Traffic classification based, strict priority and
WRR |
|
Ingress/Egress Rate Limit per port bandwidth
control |
Security |
IEEE 802.1X port-based authentication |
|
Built-in RADIUS client to cooperate with RADIUS
server |
|
RADIUS/TACACS+ authentication |
|
IP-MAC port binding |
|
MAC filtering |
|
Static MAC address |
|
DHCP snooping and DHCP Option82 |
|
STP BPDU guard, BPDU filtering and BPDU forwarding |
|
DoS attack prevention |
|
ARP inspection |
|
IP source guard |
|
Storm control support |
|
- Broadcast/unknown unicast/unknown multicast |
Management Functions |
|
Basic Management Interfaces |
Web browser, Console, Telnet, SNMP v1, v2c, v3 |
|
Firmware upgrade by HTTP/TFTP protocol through Ethernet
network |
|
Configuration upload/download through HTTP/TFTP |
|
Remote/local syslog |
|
System log |
|
LLDP protocol |
|
SNTP |
|
PLANET Smart Discovery Utility |
Secure Management Interfaces |
SSH, SSL, SNMP v3 |
SNMP MIBs |
RFC 1213 MIB-II |
|
RFC 1215 Generic Traps |
|
RFC 1493 Bridge MIB |
|
RFC 2674 Bridge MIB Extensions |
|
RFC 2737 Entity MIB v2 |
|
RFC 2819 RMON (1, 2, 3, 9) |
|
RFC 2863 Interface Group MIB |
|
RFC 3635 Ethernet-like MIB |
Standards Conformance |
|
Regulatory Compliance |
FCC Part 15 Class A, CE |
Stability Testing |
IEC 60068-2-32 (free fall) |
|
IEC 60068-2-27 (shock) |
|
IEC 60068-2-6 (vibration) |
Standards Compliance |
IEEE 802.3 10BASE-T |
|
IEEE 802.3u 100BASE-TX |
|
IEEE 802.3ab Gigabit 1000BASE-T |
|
IEEE 802.3x Flow Control and Back Pressure |
|
IEEE 802.3ad Port Trunk with LACP |
|
IEEE 802.1D Spanning Tree Protocol |
|
IEEE 802.1w Rapid Spanning Tree Protocol |
|
IEEE 802.1s Multiple Spanning Tree Protocol |
|
IEEE 802.1p Class of Service |
|
IEEE 802.1Q VLAN Tagging |
|
IEEE 802.1x Port Authentication Network Control |
|
IEEE 802.1ab LLDP |
|
RFC 768 UDP |
|
RFC 793 TFTP |
|
RFC 791 IP |
|
RFC 792 ICMP |
|
RFC 2068 HTTP |
|
RFC 1112 IGMP v1 |
|
RFC 2236 IGMP v2 |
|
RFC 3376 IGMP v3 |
|
RFC 2710 MLD v1 |
|
RFC 3810 MLD v2 |
Environment |
|
Operating |
Temperature: -40 ~ 75 degrees C |
|
Relative Humidity: 5 ~ 95% (non-condensing) |
Storage |
Temperature: -40 ~ 85 degrees C |
|
Relative Humidity: 5 ~ 95%
(non-condensing) |