IMG 1 of 1
No Longer Available

Part Number:
419794
(?) Brand:
Manuf No:
B97A
Shipping Weight:
3.5 KG (Includes product packaging)
Estimate Shipping
Date Added:
All stock codes associated to this product
B97A, 30ACB97A

Overview

Device

Product Type

Mini PTZ 

Maximum Resolution

3MP 

Application Environment

Outdoor 

Image Sensor

Progressive Scan CMOS 

Sensor Size

1/3 " 

Effective Pixels

2048(H) X 1536(V) (3.15 MP) 

Day / Night

Yes 

Low Light Sensitivity

Standard 

Minimum Illumination

Color: 0.1 lux at F1.8 (30 IRE , 2400 K); B/W: 0.05 lux at F1.8 (30 IRE, 2400 K) 

Color to B/W Switch

ISP based switch, configurable 

Mechanical IR Cut Filter

Yes 

IR Sensitivity Range

700-1100nm 

IR LED

No 

Electronic Shutter

1/5-1/2000sec (manual mode); 1/5-1/10000sec (auto mode) 

Horizontal Resolution (TV Lines)

1500 TVL 

S/N Ratio

52 dB 

Lens

Focal Length

Zoom, f4.9-49mm 

Aperture

F1.8-F3.0 

Zoom Ratio

10x optical 

Zoom Speed

2 sec (wide to tele) 

Zoom Application

Camera Installation, Auto Zoom by Event, Manual Operation 

Iris

DC iris 

Focus

Auto focus 

Lens Mount

Board mount 

Horizontal Viewing Angle

49.6 - 5.6 

Vertical Viewing Angle

32.3 - 4.1 

PTZ

Manual Panning / Tilting Speed

0.1 - 190/sec, 0.1 - 150/sec 

Preset Panning/Tilting Speed

0.1 - 190/sec, 0.1 - 150/sec 

Panning Range

-175~175 

Tilting Range

0~180 (with E-flip) 

PTZ Control

Remote manual control, 10 preset tours, Auto scan 

Preset Accuracy (Panning/Tilting)

1.5/1.5 

Absolute Position

Yes 

Pan, Tilt or Zoom protocol

Visca, Pelco-D, Pelco-P, ACTi URL command 

Video

Compression

H.264 (Baseline/ Main/ High profile), MJPEG 

Maximum Frame Rate vs. Resolution

20 fps at 2048 x 1536

30 fps at 1920 x 1080

30 fps at 1280 x 720

30 fps at 800 x 600

30 fps at 640 x 480

15 fps at 320 x 240 

Multi-Streaming

Simultaneous dual streams based on two configurations 

Bit Rate

28Kbps - 6Mbps (per stream) 

Bit Rate Mode

Constant, Variable 

Wide Dynamic Range

Superior WDR (110 dB) 

Image Enhancement

White Balance, Brightness, Contrast, Sharpness, Automatic gain control, Flickerless 

Digital Noise Reduction

2D + 3D DNR 

Privacy Mask

4 configurable regions for each of 17 preset points 

Text Overlay

Yes 

VMS-based Analytics

Object Counting, People Counting, Face Detection, Object Based Motion Detection, Tamper, Line Crossing, Enter Area, Missing Object, Unattended Object, Smoke Detection, Heat Map, Dwell time, Direction Detection, License Plate Recognition, People Queue management, (Require PC-based or standalone IVS or ALPR Server. Contact ACTi support for recommendations on how to maximize analytical accuracy) 

Image Orientation

Flip, Mirror 

Audio

Audio Type

2-way, Line-in, Line-out 

Audio Compression

8 kHz, 16 bit encoding, Mono, PCM, G.711 

Network

Network Protocol & Service

IPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, NTP, RTP, RTSP, RTCP, SMTP, FTP, IGMP, ICMP, ARP, Bonjour, UPnP, QoS, SNMP, IEEE 802.1X 

Ethernet Port

1 x RJ-45 connector 

Security

IP address filtering, HTTPS encryption, Password protected user level, Anonymous login, IEEE 802.1X network access control 

Event

Event Trigger

Video motion detection (3 regions), External device through digital input, Sound detection 

Event Response

Notify control center, Go to PTZ preset point or preset tour, Change camera settings, Command other devices, E-mail notification with snapshots, Push notification to mobile device, Save video to local storage, Upload video or snapshot to FTP server, Upload video to NVR server, Activate external device through digital output 

Integration

Unified Solution

Fully compatible with ACTi software 

Software Development Kit

Yes 

GPS Position

Manual setting 

ONVIF Compliant

Yes, Profile S, Profile G 

GB28181 Compliant

Yes 

Web Browser

IE 9.0 or newer, Firefox with VLC, Chrome with VLC, Safari with QuickTime 

Auto Firmware Upgrade

Yes 

Interface

Audio Interface

Terminal block 

Local Storage

MicroSDHC, MicroSDXC memory card slot (card not included) 

Digital Input/Output

1/1 

General

Power Source

DC 12V, PoE Class 3 (IEEE802.3af) 

Power Consumption

12.2 W (PoE, heater and fan on) 

Weight

1306g (2.88lb) 

Environmental Casing

Weatherproof (IP67), Vandal proof (IK10) 

Mount Type

Surface, Gang Box, Flush, Pendant, Converter for NPT Standard Mounts, Wall Mount, Pole Mount, Corner Mount 

Fan

Yes 

Heater

Yes 

Starting Temperature

-30C ~ 50C (-22F ~ 122F) within 30 minutes 

Operating Temperature

-40C ~ 50C (-40F ~ 122F) 

Operating Humidity

10% - 85% RH 

Warranty

3 Year(s)* (3 months in continuous motion) 

Approvals

CE, FCC, IP67, IK10, NEMA 4X, UL (for optional PoE injector and power adapter) 

Extended Warranty

2 Year(s)* (3 months in continuous motion) 

No additional files, specification sheets, guides or documentation found for product.

Warranty: 24 Month Return To Base

Full manufacturers warranty details are available at the manufacturers (ACTi) web site.

Unless otherwise specified Techbuy is normally your first point of contact for warranty related returns, further information regarding our warranty policies and consumer guarantees is available on our policies and service & support pages.

To apply for return of a product just go to our returns page.

These terms are in addition to and do not affect any terms, conditions, guarantees and warranties implied by law.

Visitor Reviews

[ There are no visitor reviews for this product yet]

Review Product
Click on a thumbnail to view it below

No related products found.

 
L7: 1 | TM: 1 | LM: 4 | TY: 9 | T: 295
We accept the following with No surcharge on VISA, Mastercard and Paypal!
© Techbuy Pty Ltd 2000 - 2024 All rights reserved.
All prices shown on techbuy.com.au are in $AUD and inclusive of GST. Prices and availability are subject to change without prior notice. Images displayed are accurate to the best of our knowledge and we will not be held responsible for purchases based soley on these images. All brands and names are trademarks of their respective companies. Shipping Australia wide to all metro and regional areas (Sydney, Melbourne, Brisbane, Adelaide, Perth) and Internationally. For more information, please see our usage policies.