Radio Specifications802.11ac |
5.1505.850 GHz Operating Frequency |
|
802.11ac Modulation (256-QAM) |
|
Rates (Mbps): MCS0MCS9 (6.5Mbps 1300 Mbps), NSS =
1-3 |
|
3x3:3 Stream Multiple-In, Multiple-Out (MIMO)
Radio |
|
VHT20/VHT40/VHT80 support |
|
TxBF (Transmit Beamforming) |
Radio Specifications802.11n |
2.42.5 GHz & 5.1505.850 GHz Operating
Frequency |
|
802.11n Modulation |
|
2.4 GHz: Rates (Mbps): MCS0 - MCS15 (6.5Mbps -
300Mbps) |
|
5 GHz: Rates (Mbps): MCS0 - MCS15 (6.5Mbps -
450Mbps) |
|
3x3 Multiple-In, Multiple-Out (MIMO) Radio for 5
GHz |
|
2x2 Multiple-In, Multiple-Out (MIMO) Radio for 2.4
GHz |
|
HT20 High-Throughput (HT) Support (for both 2.4 GHz and 5
GHz) |
|
HT40 High-Throughput (HT) Support for 5 GHz |
Radio Specifications802.11g |
2.42.5 GHz Operating Frequency |
|
Orthogonal Frequency Division Multiplexing (OFDM)
Modulation |
|
20 dBm (100 mW) Transmit Power |
|
Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto
fallback |
Radio Specifications802.11b |
2.42.5GHz Operating Frequency |
|
Direct-Sequence Spread-Spectrum (DSSS) Modulation |
|
Rates (Mbps): 11, 5.5, 2, 1 w/auto fallback |
Radio Specifications802.11a |
5.1505.850 Operating Frequency |
|
Orthogonal Frequency Division Multiplexing (OFDM
Modulation |
|
Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto
fallback |
Antennas |
2x Integrated single band, 2.4-2.5 GHz Omnidirectional
antennas |
|
3 x Integrated single band, 5.1-5.8 GHz Omnidirectional
antennas |
|
1 x BLE internal antenna |
|
1 x zigbee internal antenna |
Interfaces |
Eth0 / POE Input: Autosensing 10/100/1000 Base-T Ethernet POE Input
Port |
|
Eth1 / PoE Output: Autosensing 10/100/1000 Base-T Ethernet PoE Output
Port |
|
Eth2 / Eth3: 2x Autosensing 10/100/1000 Base-T Ethernet
Port |
|
Passive pass thru connection : 2 x RJ-45 port (from the back of the AP
to the bottom) |
|
Built-in BLE and Zigbee (future use) |
|
RJ-45 Console Port |
Physical |
|
WxDxH |
4.2 x 1.1 x 6.9 (105.9mm x 29.2mm x 175mm) |
Weight |
0.86 lb / ( 0.39 kg) |
Wallplate Bracket Weight |
0.26 lb ( 0.1 kg) |
|
|
Environmental |
|
Operating |
0 to +40 degree C, Storage: -40 to +70 degree C |
Humidity |
95% |
|
|
Mounting |
Wallplate (included with the AP) |
|
Desk mount (sold as an accessory) |
Power Consumption |
|
802.3af Input |
Typical 11.3W, Max 12.4W |
802.3at Input |
Typical 23.6W, Max 24.9W (with 12W POE Output
Load) |
48VDC Input |
Typical 26.9W, Max 28.2W (with 15.4W POE Output
Load) |
|
|
Power Options |
|
IEEE 802.3af / 802.3at (PoE/PoE+) |
With IEEE 802.3af PoE power, AP150W will power up and the Wi-Fi and
Ethernet ports will operate in its full capacity. In this scenario, POE
budget on the downlink port is not supported |
|
With IEEE 802.3at PoE power, AP150W will power up and the Wi-Fi and
Ethernet ports will operate in its full capacity. In this scenario, the
available POE budget on the downlink port is 12W |
Power supply 48VDC, 0.75A (sold as an accessory) |
With 48VDC input, AP150W will power up and the Wi-Fi and Ethernet ports
will operate in its full capacity. In this scenario, the available POE
budget on the downlink port is
15.4W |