All stock codes associated to this product
WGL102100AUS, WGL102-100AUS, 1551376, 606449052909
Intelligent Networking Features for a Scalable, Secure Solution
NETGEARs ProSafe 802.11g Wireless Access Point WGL102 delivers the secure, reliable, high performance wireless local area networks (WLANs) todays mobile workforce demands This powerful device provides the industry standard access to corporate network resources, as a managed wireless access point with the NETGEAR ProSafe Smart Wireless Switch. Fully compatible with IEEE 802.11g (2.4 GHz) integrated IEEE 802.3af power over Ethernet (PoE), and Wi-Fi certification, the WGL102 brings standards-based, enterprise-level functionality at a mid-market price.
Secure
Managed and configured by the NETGEAR ProSafe Smart Wireless Switch (WFS709TP), the WGL102 is a light access point that implements the 802.11 standard. As part of the centralized architecture, much of the security configuration such as WPA2-Enterprise (802.11i), WPA2 and 802.1x support happens at the NETGEAR ProSafe WFS709TP. The NETGEAR ProSafe Smart Wireless Switch also supports MAC address authentication, support for multiple BSSID/ VLANs and guest/contractor access.
Dynamic
The WGL102 supports IntelliFi RF management technology in conjunction with the NETGEAR ProSafe Smart Wireless Switch. The ProSafe Smart Wireless Switch supports dynamic power level settings and adjustable radio management features.
Flexible
As part of the NETGEAR ProSafe Smart Wireless Solution, the WGL102 is cost-effective, compact, and simple to install and use. Integrated PoE support expands installation options by eliminating the need to locate near a power outlet. It is Wi-Fi certified and plenum rated for appropriate placement above drop-down ceilings and under raised floors. Fitted with one powerful detachable 5 dBi antenna and compatible with NETGEARs ProSafe 2.4 GHz antennas for expanded wireless capacity and range, the WGL102 is protected with a NETGEAR Lifetime Warranty.
Specifications
Wireless
- Standard: IEEE 802.11g 54 Mbps
- Antennas: One (1) 5 dBi detachable 2.4 GHz
Physical Interfaces
- LAN Port: One (1) 10/100BASE-T Ethernet (RJ-45) port with Auto Uplink (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support
- Power adapter: Output 12V DC, 1.2-A; plug is localized to country of sale
- Four (4) LEDs: Power, test, 100 Mbps, link/ACT, and WLAN 802.11g
- Antenna connector: One (1) reverse SMA
Managed by NETGEAR ProSafe Smart Wireless Switch (WFS709TP)
Typical Maximum Power Output
- 802.11b mode, 1 to 11 Mbps +19 dBm
- 802.11g mode, 6 to 24 Mbps +18 dBm
- 802.11g mode, 36, 48 and 54 Mbps +17/16/16 dBm
Note: Maximum Tx varies based on country and/or region selection to ensure local regulatory compliance.
Receive Sensitivity
- 802.11b
2 Mbps |
-93 dBm |
5.5 Mbps |
-91 dBm |
11 Mbps |
-89 dBm |
- 802.11g
6 Mbps |
-91 dBm |
9 Mbps |
-90 dBm |
12 Mbps |
-89 dBm |
18 Mbps |
-87 dBm |
24 Mbps |
-84 dBm |
36 Mbps |
-81 dBm |
48 Mbps |
-77 dBm |
54 Mbps |
-75 dBm |
108 Mbps |
-73 dBm |
Standards, Safety and Electromagnetic Conformance
- IEEE 802.11g (2.4 GHz frequency band, DSSS modulation type)
- IEEE 802.3af Power over Ethernet (PoE)
- FCC Part 15 Subpart B and Subpart C
- CE EN 60950-1 (2001), EN 301 489-17 V1.2.1 (2002), EN 301 489-1 V1.4.1 (2002), EN 300 328-1 (2001-12), EN 300 328-2 (2001-12), R&TTE Directive
- 99/5/EC, CISPR 22 (B), AS/NZS 3548 (B)
- Plenum rated
Physical Specifications
- Dimensions: (w x d x h) 14.1 x 10 x 2.7 cm (5.56 x 3.94 x 1.06 in)
- Weight: 386 g (.85 lb)
Environmental Specifications
- Operating temperature: 0 to 40 C (32 to 104 F)
- Operating humidity: 90% maximum relative humidity, non-condensing
Package Contents
- ProSafe 802.11g Wireless Access Point (WGL102)
- One (1) 5 dBi detachable antenna
- Power adapter
- Ethernet cable
- Installation guide
- Warranty/support information card