Merry Christmas from the team at Techbuy Christmas Trading Hours
IMG 1 of 1
No Longer Available

Part Number:
127709
(?) Brand:
Manuf No:
ADST114
Shipping Weight:
0.5 KG (Includes product packaging)
Estimate Shipping
All stock codes associated to this product
ADST114
The Addonics SATA 4-Port RAID controller makes adding RAID storage to any computers easy and affordable. It supports up to 4 Serial ATA hard drives and can be configured as RAID 1, RAID 0, RAID 1+0, RAID 1+S or 4 individual drives. Together with the Addonics optional Disk Array 4SA system, high performance and reliable data storage system can be added to any computers at less than half of the cost of traditional SCSI or IDE solution.
 
Product Features
  • 4 Internal Serial ATA ports
  • High data throughput, up to 150 Mbytes/sec (1.5Gbits/sec)
  • Work with any Serial ATA drive
  • Built-in RAID 0, RAID 1, RAID 1+0, RAID 1+ S support
  • Use as a non-RAID controller for 4 individual drives or as RAID controller
  • Support large hard drives of 137 GB or greater
  • Silicon Image chip set SiI 3114
  • Upgradable firmware
  • Fits standard Desktop case and low profile systems
  • Hot swap - device can be removed and added without system shut down or restart
  • simple plug and play
  • compatible with DOS, Windows NT, 98SE, Me, 2000 and XP, Vista, Linux ( Kernel 2.4 or higher)
Specifications
  • 4 Serial ATA interface ports
  • Fully compliant with Serial ATA 1.0 specification
  • Independent 256-byte FIFOs (32 bit*64 deep) per Serial ATA channel for host reads and writes
  • Compliant with 32-bit, 33/66 MHz PCI 2.2 host interface
  • Integrated PCI DMA engines
  • Build-in RAID 0, RAID 1, RAID 1+0 support
  • RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring
  • RAID 1+S (Mirrored-sparing) can automatically replace the failed drive and rebuild the system when booting HDD is failed
  • Supports ATAPI commands
  • Upgradable firmware
  • Supports Spread Spectrum in receiver
  • Compliant with PCI Specification, revision 2.2
  • Temperature: Operating 0 to 70 degree C.
  • Storage: -25 to 90 degree C.
  • Humidity: Operating 20% to 80%
  • Non Operating 15% to 90%
  • Work under DOS, Windows NT, 98SE, Me, 2000 and XP, Vista, Linux ( Kernel 2.4 or higher)
  • Dimension (W x D x H) - 125 mm x 19 mm x 63 mm.
  • 1 year warranty

System Requirement

  • PC/AT or Compatible System
  • One free PCI slot
  • Pentium or greater
  • Minimum 32 MB RAM
  • 10 MB minimum free hard disk space
  • One of the following operating systems: DOS, Windows NT, 98SE, Me, 2000, XP, Vista, Linux ( Kernel 2.4 or higher)

No additional files, specification sheets, guides or documentation found for product.

Warranty: 1 Year Return to Base

Full manufacturers warranty details are available at the manufacturers (Addonics) web site.

Unless otherwise specified Techbuy is normally your first point of contact for warranty related returns, further information regarding our warranty policies and consumer guarantees is available on our policies and service & support pages.

To apply for return of a product just go to our returns page.

These terms are in addition to and do not affect any terms, conditions, guarantees and warranties implied by law.

Visitor Reviews

[ There are no visitor reviews for this product yet]

Review Product
Click on a thumbnail to view it below

No related products found.

 
L7: 2 | TM: 9 | LM: 24 | TY: 189 | T: 3525
We accept the following with No surcharge on VISA, Mastercard and Paypal!
© Techbuy Pty Ltd 2000 - 2024 All rights reserved.
All prices shown on techbuy.com.au are in $AUD and inclusive of GST. Prices and availability are subject to change without prior notice. Images displayed are accurate to the best of our knowledge and we will not be held responsible for purchases based soley on these images. All brands and names are trademarks of their respective companies. Shipping Australia wide to all metro and regional areas (Sydney, Melbourne, Brisbane, Adelaide, Perth) and Internationally. For more information, please see our usage policies.