All stock codes associated to this product
GS724TP200AJS, GS724TP-200AJS, 10606449119227, 606449119220
Netgear GS724TP-200AJS Gigabit PoE+ Smart Managed
Pro Switches
Overview
Going Gigabit and PoE+ Just Got More Cost-Effective!
As a leading provider of network equipment for SMBs, NETGEAR understands the
importance of providing great choice of PoE port counts and power budgets that
can adapt to the businesss needs, whether in the hospitality, catering,
education or retail domains.
The GS724TPv2 24-Port Gigabit Switch with PoE+ and 2 SFP Ports joins the
NETGEAR Standalone Smart Managed Pro Switches family, adding full 24 port PoE+
support for deployment of modern high-power PoE devices. Cautious spender
organizations can now deploy denser PoE+ devices connected to a cost-effective
switch, with a reasonable PoE power budget of 190W.
NETGEAR Smart Managed Pro Switches offer powerful Layer 2 features, great PoE
functionality, and enhanced performance and usability. These switches are the
ideal solution even for the most advanced small and medium organizations looking
for the best combination of features, performance, and value: they are purposely
designed for converged networks where voice, video, data are all carried on a
single network platform.
Temperature- and load-based fan-speed control combines accurate monitoring
with minimized system acoustic noise: the GS724TPv2 supports quiet rack mounting
operation with a maximum of 32.4dB even at full power and 25C (77F) ambient.
Highlights
The GS724TPv2 24-Port Gigabit Smart Managed Pro Switch provides a great
value, with configurable L2 network features like VLANs and PoE operation
scheduling, allowing SMB customers to deploy PoE-based VoIP phones and IP
surveillance. Advanced features such as Access Control Lists (ACLs), L2/L3/L4
QoS (DiffServ), LACP link aggregation and Spanning Tree will satisfy even the
most advanced small business networks.
Features
- Advanced VLAN support for better network segmentation
- L2/L3/L4 access control lists (ACLs) for granular network access control
including 802.1x port authentication
- Advanced per port PoE controls for remote power management of PoE
connected devices including operation scheduling (e.g. Wireless APs, IP
security cameras, LED lighting, secure access door locks, IoT devices)
- Advanced QoS (Quality of Service) for traffic prioritization including
port-based, 802.1p and L2/L3/L4 DSCP-based
- Auto denial-of-service (DoS) prevention
- IGMP Snooping and Querier for multicast optimization
- Rate limiting and priority queuing for better bandwidth allocation
- Port mirroring for network monitoring
- Energy Efficient Ethernet (IEEE 802.3az) for maximum power savings
- Cable test to troubleshoot connection issues
- SNMP v1, v2c, v3 and RMON remote monitoring
Build a high-value network with NETGEAR:
- Solid performance with 52Gbps nonblocking architecture, 8K MAC addresses,
64 VLANs, 100 shared ACLs and 128 Multicast groups
- PoE+ support on all ports, providing flexibility in the future to add more
power-hungry devices such as video phone, PTZ camera and 11ac Wireless APs
into the network
- 2 Dedicated SFPs, not only providing fiber uplinks, but also uplink
redundancy and failover, improving reliability and availability for the
network
- 2 Dedicated SFPs, not only providing fiber uplinks, but also uplink
redundancy and failover, improving reliability and availability for the
network
Smart IT, not Big IT
- Easy-to-use Web browser-based management GUI makes setup and management
simple
- Standards-based technology ensures interoperability with any
standards-based devices in the existing network
- Dual firmware images improve reliability and uptime to your network
- Worry-free with NETGEAR ProSAFE LIFETIME Hardware Warranty*
- Minimal down-time with NETGEAR ProSAFE LIFETIME Next-Business-Day
Replacement Warranty
- Get deployment assistance with 90-days Free 24x7 Advanced Technical Phone
Support**
- LIFETIME Online Chat Technical Support
Hardware at a Glance
|
FRONT |
|
|
Model Name
|
GS724TPv2 |
|
Form-Factor |
Rackmount |
|
10/100/1000BASE-T RJ45 Ports |
24 |
|
1000BASE-X Fiber SFP
Ports |
2 |
|
PoE+ 802.3at Ports
(Budget) |
24 PoE+
(190W) |
|
REAR |
|
|
Power
Supply |
1 internal PSU,
fixed |
|
SIDE |
|
|
Fans |
2 internal fans,
fixed |
GS724TPv2: 24-port Gigabit PoE+ Smart Managed Pro
Switch
- 24 x 1000BASE-T PoE+ Copper ports
- 2 x 1000BASE-X Dedicated Fiber SFP ports
- 190W PoE budget (max 32.4dB @ 25C / 77F ambient)
Software at a Glance
|
LAYER 2
FEATURES |
|
|
Management |
Web Browser-based GUI
(HTTP/HTTPS), |
|
PC-Based Smart
Control Center Utility (SCC) |
|
RMON,
SNMP |
|
IPv4 ACL and
QoS |
L2, L3, L4
Ingress |
|
IPv4 Multicast
Filtering |
IGMP |
|
Auto-VoIP |
Yes |
|
IEEE (802.3az) Energy
Efficient Ethernet |
Yes |
|
VLANs |
Static, Dynamic,
Voice |
|
Convergence |
LLDP-MED, RADIUS, 802.1X |
Performance at a Glance
|
Model
Name |
GS724TPv2 |
|
Packet
buffer |
0.5
MB |
|
CPU |
500
Mhz MIPS-4KEc CPU |
|
128MB
RAM |
|
32MB SPI
FLASH |
|
ACLs |
100
shared |
|
MAC Address Table
VLANs |
8K
MAC |
|
64
VLANs |
|
Fabric |
52Gbps |
|
line-rate |
|
Latency
(64-byte packets) |
1G Copper: <3.749
s |
|
1G Fiber: <3.129
s |
|
Multicast IGMP
Groups |
128 |
Features at a glance
|
HARDWARE
FEATURES |
BENEFITS |
|
1000BASE-T Copper
Ethernet PoE+ connections |
Support high-density VoIP,
Surveillance and Wi-Fi AP deployments, scalable for future
growth. Never face the risk of running out of PoE
ports. |
|
1000BASE-X Fiber
SFP ports |
Two dedicated Gigabit
SFP ports for aggregation to the network core. Support for Fiber and
Copper modules. |
|
Low
Acoustics |
Temperature-
and load-based fan-speed control allow for quiet operation
in both desktop or rackmount configuration. |
|
Energy Efficient
Ethernet (IEEE 802.3az) |
Maximum power reduction
for ongoing operation cost savings. |
|
L2 SOFTWARE
FEATURES |
BENEFITS |
|
Advanced per port PoE
controls |
Remote power management
of PoE connected devices including operation scheduling (e.g. Wireless
APs, IP security cameras, LED lighting, secure access door locks, IoT
devices). |
|
ACL filtering to permit
or deny traffic based on |
Provide granular
network access control including L2/L3/L4 access control lists
(ACLs). |
|
Robust security
features: |
Build a secured,
converged network with all types of traffic by preventing external attacks
and blocking Malware, while allowing secure access for authorized users
with RADIUS 802.1x port authentication. |
|
802.1x authentication
(EAP) |
|
|
Port-based security
by locked MAC |
|
|
Comprehensive QoS
features: |
Advanced controls for
optimized network performance and better delivery
of mission-critical traffic such as voice and
video. |
|
Port-based or 802.1p-based prioritization |
|
|
Layer 3-based (DSCP)
prioritization |
|
|
Port-based ingress
rate limiting |
|
|
Auto-VoIP and Auto-Voice VLAN |
Automatic Voice over IP
prioritization (Auto-VoIP) simplifies most
complex multi-vendor IP telephone deploy-ments either based on
OUI bytes (default database and user-based OUIs) in the phone
source MAC address, providing the best class of service to VoIP streams
(both data and signaling) over other ordinary traffic by classifying
traffic, and enabling correct egress queue
configuration. |
|
IGMP
Snooping |
Facilitate fast
receiver joins and leaves for multicast streams. Save cost and improve
network efficiency by ensuring multicast traffic only reaches designated
receivers without the need of an extra multicast
router. |
|
Protected
Ports |
Ensure no exchange of
unicast, broadcast, or multicast traffic between the protected ports on
the switch, thereby improving the security of your converged network. This
allows your sensitive phone conversa-tions to stay private and your
surveillance video clips can be forwarded to their designated storage
device without leakage or alteration. |
|
DHCP
Snooping |
Ensure IP address
allocation integrity by only allowing DHCP messages from trusted DHCP
servers and dropping malformed DHCP messages with a port or MAC address
mismatch. |
|
Dynamic VLAN
Assignment (RADIUS) |
IP phones and PCs can
authenticate on the same port but under different VLAN assignment
policies. Users are free to move around and enjoy the same level of
network access regardless of their physical location on the
network. |
|
Dual Firmware Images
and Configuration Files |
Dual firmware images
and dual configuration files for transparent firmware
updates/configuration changes with minimum service
interruption. |
PoE+ Rackmount Switch
The new standalone GS724TPv2 switch is designed with 24 ports PoE+ and 190W
power to meet the current and future needs of wireless converged networks.
Within small andmedium-sizedorganizations,
there is growing adoption of PoE devices such as VoIP phones, IP security
cameras, wireless access points, proximity sensors, LED lighting, door locks,
and other IoT devices that require network switches capable of supporting dense
PoE instal- lations. Wireless access points andpan-tilt-zoomHD
cameras using Wave 2 802.11acWi-Fialso
require PoE+ power (802.3at), increasing the power demands on PoE
switches.
PoE devices are putting a strain on
switching power demands. As a leading provider of network equipment for SMBs,
NETGEAR understands the importance of providing great choice of PoE port counts
and power budgets that can adapt to the businesss needs, whether in the
hospitality, catering, education or retail
domains.
This switch provides a great value, with
configurable Layer 2 network features like VLANs and PoE operation scheduling.
Advanced features such as DiffServ QoS, LACP link aggregation and Spanning Tree
will satisfy even the most advanced small business
networks.
Specifications
|
PRODUCT |
GS724TPv2 |
|
10M/100M/1G RJ-45 copper
ports |
24 |
|
PoE / PoE+
ports |
24 PoE+ (190W PoE
budget) |
|
1G SFP (fiber)
ports |
2
(dedicated) |
|
PERFORMANCE
SPECIFICATION |
|
|
CPU |
500
Mhz MIPS-4KEc CPU |
|
128MB RAM 32MB SPI
FLASH |
|
Packet buffer memory
(Dynamically shared across only used ports) |
0.5
MB |
|
Forwarding
modes |
Store-and-forward |
|
Bandwidth |
52
Gbps |
|
Priority
queues |
8 |
|
Priority
queuing |
Weighted Round Robin
(WRR) and Strict Priority |
|
MAC Address database
size (48-bit MAC addresses) |
8K |
|
Multicast
groups |
128 |
|
Number of
VLANs |
64 |
|
Number of DHCP snooping
bindings |
256 |
|
Access Control Lists
(ACLs) |
100 shared for MAC, IP
and UDP/TCP ACLs (ingress) |
|
Packet forwarding rate
(64 byte packet size) (Mpps) |
38.68 |
|
Jumbo frame
support |
Up to 9K packet
size |
|
Acoustic noise level @
25C (dBA) (ANSI-S10.12) |
32.4
dBA |
|
Mean Time Between
Failures (MTBF) @ 25C |
1,051,375
hours |
|
100M
Copper Latency(64-byte; 1518-byte; 9216-byte frames) |
6.38s ; 6.267s ;
6.059s |
|
1G
Copper Latency(64-byte; 1518-byte; 9216-byte frames) |
3.749s ; 4.675s ;
3.762s |
|
1G Fiber
Latency (64-byte; 1518-byte; 9216-byte frames) |
3.129s ; 4.213s ;
4.197s |
|
L2 SERVICES -
VLANS |
|
|
IEEE 802.1Q VLAN
tagging |
Yes |
|
Auto-VoIP VLAN
/ Auto-Voice VLAN |
Yes, manuel or
automatic assigment of VoIP phone traffic based on OUI bytes (default
database and user-based OUIs) in the phone source MAC address to
Voice VLAN associated with high priority QoS
parameters |
|
L2 SERVICES -
AVAILABILITY |
|
|
Broadcast, multicast,
unknown unicast storm control |
Yes |
|
IEEE 802.3ad - LAGs
(LACP) |
Yes |
|
IEEE 802.3x (full
duplex and flow control) |
Yes |
|
IEEE 802.1D Spanning
Tree Protocol |
Yes |
|
IEEE 802.1w Rapid
Spanning Tree Protocol |
Yes |
|
IEEE 802.1s Multiple
Spanning Tree Protocol |
Yes |
|
L2 SERVICES -
MULTICAST FILTERING |
|
|
IGMP snooping (v1, v2
and v3) |
Yes |
|
IGMP snooping
querier |
Yes |
|
PRODUCT |
GS724TPv2 |
|
DHCP
SERVICES |
|
|
DHCP
client |
Yes |
|
DHCP
snooping |
Yes |
|
LINK
AGGREGATION |
|
|
IEEE 802.3ad - LAGs
(LACP) |
Yes |
|
Manual Static
LAG |
Yes |
|
# of Static or LACP
LAGs |
8 LAGs with max 8
members in each LAG |
|
# of Members in each
LAG |
|
|
NETWORK MONITORING
AND DISCOVERY SERVICES |
|
|
802.1ab
LLDP |
Yes |
|
SNMP |
v1, v2c,
v3 |
|
RMON group
1,2,3,9 |
Yes |
|
NETWORK
SECURITY |
|
|
IEEE
802.1x |
Yes
(EAP) |
|
Guest
VLAN |
Yes |
|
RADIUS-based VLAN
assignment via .1x |
Yes |
|
RADIUS
accounting |
Yes |
|
Access Control Lists
(ACLs) |
L2 / L3 / L4
ingress |
|
IP-based ACLs
(IPv4) |
Yes |
|
MAC-based ACLs |
Yes |
|
TCP/UDP-based ACLs |
Yes |
|
MAC
lockdown |
Yes |
|
MAC lockdown by the
number of MACs |
Yes |
|
Control MAC # Dynamic
learned entries |
600 |
|
Control MAC # Static
entries |
20 |
|
IEEE802.1xRADIUSportaccessauthentication |
Yes |
|
Port-based security
by locked MAC addresses |
Yes |
|
Broadcast, multicast,
unknown unicast storm control |
Yes |
|
DoS attacks
prevention |
Yes |
|
QUALITY OF SERVICE
(QOS) |
|
|
Port-based rate
limiting |
Yes
egress |
|
Port-based QoS |
Yes |
|
DiffServ
QoS |
Yes
ingress |
|
IEEE 802.1p
COS |
Yes |
|
Destination MAC and
IP |
Yes |
|
IPv4
DSCP |
Yes |
|
IPv4
ToS |
Yes |
|
TCP/UDP-based |
Yes |
|
Weighted Round Robin
(WRR) |
Yes |
|
PRODUCT |
GS724TPv2 |
|
Strict priority queue
technology |
Yes |
|
Auto-VoIP VLAN
/ Auto-Voice VLAN |
Yes, manuel or
automatic assigment of VoIP phone traffic based on OUI bytes (default
database and user-based OUIs) in the phone source MAC address to
Voice VLAN associated with high priority QoS
parameters |
|
IEEE NETWORK
PROTOCOLS |
|
|
IEEE 802.3
Ethernet |
IEEE 802.3z Gigabit
Ethernet 1000BASE-SX/LX |
|
IEEE
802.3u 100BASE-T |
IEEE
802.3x Full-Duplex Flow Control |
|
IEEE 802.1Q VLAN
Tagging |
IEEE 802.1AB LLDP
with ANSI/TIA-1057 (LLDP-MED) |
|
IEEE
802.3ab 1000BASE-T |
IEEE 802.1p Class of
Service |
|
IEEE 802.3af
PoE |
IEEE 802.1D Spanning
Tree (STP) |
|
IEEE 802.3at
PoE+ |
IEEE 802.1s Multiple
Spanning Tree (MSTP) |
|
IEEE 802.3az Energy
Efficient Ethernet (EEE) |
IEEE 802.1w Rapid
Spanning Tree (RSTP) |
|
IEEE 802.3ad Trunking
(LACP) |
IEEE 802.1x RADIUS
Network Access Control |
|
MANAGEMENT |
|
|
Password
management |
Yes |
|
Configurable management
VLAN |
Yes |
|
AdminaccesscontrolviaRADIUSandTACACS+ |
Yes |
|
SNTP client over UDP
port 123 |
Yes |
|
SNMP
v1/v2c |
Yes |
|
SNMP v3 with multiple
IP addresses |
Yes |
|
RMON group
1,2,3,9 |
Yes |
|
Port
mirroring |
Yes |
|
Many-to-one port
mirroring |
25 |
|
Web browser-based graphical
user interface (GUI) |
Yes |
|
Smart Control Center
(SCC) for multi-switch management |
Yes |
|
Dual software
(firmware) image |
Yes |
|
Cable test
utility |
Yes |
|
HTTPS/TLS Web-based access
(version) |
Yes
(v1.0) |
|
File transfers
(uploads, downloads) |
TFTP /
HTTP |
|
HTTP upload/download
(firmware) |
Yes |
|
Syslog (RFC
3164) |
Yes |
|
LEDS |
|
|
Per
port |
Speed, Link,
Activity |
|
Per
device |
Power and
Fan |
|
PHYSICAL
SPECIFICATIONS |
|
|
Dimensions (W x D x
H) |
440 x 204 x 43
mm |
|
(17.3 x 8 x 1.7
in) |
|
Weight |
3.15
kg |
|
(6.96
lb) |
|
PRODUCT |
GS724TPv2 |
|
POWER
CONSUMPTION |
|
|
Max power (worst case,
all ports used, full PoE, line-rate traffic)
(Watts) |
228.53
W |
|
Max power without PoE
(worst case, all ports used, line-rate traffic)
(Watts) |
21.62
W |
|
Heat Dissipation (worst
case, all ports used, full PoE, line-rate traffic)
(BTU/hr) |
780.20
BTU/hr |
|
Heat Dissipation
without PoE (worst case, all ports used, line-rate traffic)
(BTU/hr) |
73.8
BTU/hr |
|
Energy Efficient
Ethernet (EEE) IEEE 802.3az |
Yes (deactivated by
default) |
|
Short Cable Power
Reduction |
Yes (deactivated by
default) |
|
Auto Power
Down |
Yes (deactivated by
default) |
|
Fan |
2 |
|
ENVIRONMENTAL
SPECIFICATIONS |
|
|
Operating |
|
|
Power |
Internal 100-240VAC 50-60Hz |
|
Operating
temperature |
0 to 50 DegreeC (32 to
122 DegreeF) |
|
Humidity
(relative) |
90% maximum relative
humidity (RH), non-condensing |
|
Altitude |
10,000ft (3,000m)
maximum |
|
Storage |
|
|
Storage
temperature |
20 to 70 DegreeC (
4 to 158 DegreeF) |
|
Humidity
(relative) |
95% maximum relative
humidity, non-condensing |
|
Altitude |
10,000ft (3,000m)
maximum |
|
ELECTROMAGNETIC
EMISSIONS AND IMMUNITY |
|
|
Certifications |
CE: EN
55032:2012+AC:2013/CISPR 32:2012, EN 61000- |
|
3-2:2014, Class A,
EN 61000-3-3:2013, EN 55024:2010 |
|
VCCI
: VCCI-CISPR 32:2016, Class A |
|
RCM: AS/NZS CISPR
32:2013 Class A |
|
CCC: GB4943.1-2011; YD/T993-1998; GB/T9254-2008 |
|
(Class
A) |
|
FCC: 47 CFR FCC Part
15, Class A, ANSI C63.4:2014 |
|
ISED: ICES-003:2016 Issue
6, Class A, ANSI C63.4:2014 |
|
BSMI: CNS 13438 Class
A |
|
SAFETY |
|
|
Certifications |
CB report / certificate
IEC 60950-1:2005 |
|
(ed.2)+A1:2009+A2:2013 |
|
UL listed (UL 1950)/cUL
IEC 950/EN 60950 |
|
CE LVD:
EN 60950-1: 2006 + A11:2009 + A1:2010 + |
|
A12:2011 +
A2:2013 |
|
RCM (AS/NZS)
60950.1:2015 |
|
CCC (China Compulsory
Certificate): GB4943.1-2011; YD/ |
|
T993-1998; GB/T9254-2008 (Class
A) |
|
BSMI:
CNS 14336-1 |
Networking
