|
CPU |
CPU
Model |
AMD
Ryzen V1500B |
|
CPU
Quantity |
1 |
|
CPU
Architecture |
64-bit |
|
CPU
Frequency |
4-core
2.2 GHz |
|
Hardware
Encryption Engine (AES-NI) |
Yes |
|
Memory |
System
Memory |
2
GB DDR4 ECC SODIMM |
|
Memory
Module Pre-installed |
2
GB (2 GB x 1) |
|
Total
Memory Slots |
2 |
|
Maximum
Memory Capacity |
32
GB (16 GB x 2) |
|
Notes |
Synology
reserves the right to replace memory modules with the same or higher
frequency based on supplier's product life cycle status. Rest assured that
the compatibility and stability have been strictly verified with the same
benchmark to ensure identical performance. |
|
Please
select Synology memory modules for optimum compatibility and reliability.
Synology will not provide complete product warranty or technical support
if non-Synology memory modules are used for memory
expansion. |
|
For
more information about the recommended memory configurations, please check
the Hardware Installation Guide of your Synology
product. |
|
Storage |
Drive
Bays |
4 |
|
Maximum
Drive Bays with Expansion Unit |
8
(RX418 x 1) |
|
Compatible
Drive Type* (See all supported drives) |
3.5"
SATA HDD |
|
2.5"
SATA SSD |
|
Hot
Swappable Drive |
Yes |
|
Notes |
"Compatible
drive type" indicates drives that have been tested to be compatible with
Synology products. This term does not indicate the maximum connection
speed of each drive bay. |
|
The
maximum raw capacity is not limited by the maximum single volume size.
Synology NAS models may utilize capacities over the maximum single volume
size as long as each volume created is below the limit. (Learn
more) |
|
External
Ports |
RJ-45
1GbE LAN Port* |
4
(with Link Aggregation / Failover support) |
|
USB
3.2 Gen 1 Port* |
2 |
|
eSATA
Port |
1 |
|
Notes |
This
device's 1GbE LAN ports have a maximum transmission unit (MTU) size of
1,500 bytes. |
|
The
USB 3.0 standard was renamed to USB 3.2 Gen 1 by the USB Implementers
Forum (USB-IF) in 2019. |
|
PCIe |
PCIe
Expansion |
1
x Gen3 x8 slot (x4 link) |
|
File
System |
Internal
Drives |
Btrfs |
|
EXT4 |
|
External
Drives |
Btrfs |
|
EXT4 |
|
EXT3 |
|
FAT |
|
NTFS |
|
HFS+ |
|
exFAT |
|
Appearance |
Form
Factor (RU) |
1U |
|
Size
(Height x Width x Depth) |
RS822+
:44 mm x 480 mm x 492.6 mmRS822RP+ :44 mm x 480 mm x 518.6
mm |
|
Weight |
RS822+
:6.4 kgRS822RP+ :8.0 kg |
|
Rack
Installation Support* |
4-post
19" rack (Synology Rail Kit
- RKM114/RKS-02) |
|
Notes |
The
rail kit is sold separately |
|
Others |
System
Fan |
RS822+
:40 mm x 40 mm x 3 pcsRS822RP+ :40 mm x 40 mm x 2
pcs |
|
Fan
Speed Mode |
Full-Speed
Mode |
|
Cool
Mode |
|
Quiet
Mode |
|
Power
Recovery |
Yes |
|
Noise
Level* |
RS822+
:27.4 dB(A)RS822RP+ :38.8
dB(A) |
|
Scheduled
Power On / Off |
Yes |
|
Wake
on LAN / WAN |
Yes |
|
Power
Supply Unit / Adapter |
150
W |
|
Redundant
Power Supply |
RS822+
:-RS822RP+ : |
|
AC
Input Power Voltage |
100
V to 240 V AC |
|
Power
Frequency |
50/60
Hz, Single Phase |
|
Power
Consumption* |
47.69
W (Access) |
|
16.7
W (HDD Hibernation) |
|
British
Thermal Unit |
162.83
BTU/hr (Access) |
|
57.02
BTU/hr (HDD Hibernation) |
|
Notes |
For
more information on how power consumption is measured, refer to this
article. |
|
Noise
testing was conducted with the Synology system fully installed with
Synology SATA HDDs and in an idle stae. Two G.R.A.S. Type 40AE microphones
are placed at a 1 m distance from the front and rear of the device.
Background noise: 16.49-17.51 dB(A); Temperature: 24.25-25.75C; Humidity:
58.2-61.8% |
|
Temperature |
Operating
Temperature |
0C
to 35C (32F to 95F) |
|
Storage
Temperature |
-20C
to 60C (-5F to 140F) |
|
Relative
Humidity |
5%
to 95% RH |
|
Certification |
FCC |
|
CE |
|
BSMI |
|
VCCI |
|
RCM |
|
UKCA |
|
EAC |
|
CCC |
|
KC |
|
UL |
|
Warranty |
3-year
hardware warranty, extendable to 5 years
with EW202 or Extended Warranty
Plus |
|
Notes |
Availability
varies by region. Before purchasing, please visit the official web pages
of EW201/202 and Extended Warranty Plus for a list of
eligible regions. |
|
The
warranty period starts from the purchase date as stated on your purchase
receipt. (Learn more) |
|
Environment |
RoHS
Compliant |
|
Packaging
Content |
RS822+
: |
|
Main
Unit X 1 |
|
Accessory
Pack X 1 |
|
AC
Power Cord X 1 |
|
Quick
Installation Guide X 1 |
|
RS822RP+
: |
|
Main
Unit X 1 |
|
Accessory
Pack X 1 |
|
AC
Power Cord X 2 |
|
Quick
Installation Guide X 1 |
|
Optional
Accessories |
DDR4
ECC
SODIMM: D4ES02-4G/D4ES02-8G/D4ES01-16G |
|
Expansion
Units: RX418 |
|
3.5"
SATA HDD: HAT5300 |
|
2.5"
SATA SSD: SAT5210 |
|
M.2
SSD & 10GbE Combo Adapter
Card: E10M20-T1 |
|
M.2
SSD Adapter Card: M2D20 |
|
25GbE
Network Interface Card: E25G21-F2 |
|
10GbE
Network Interface
Card: E10G21-F2/E10G18-T2/E10G18-T1 |
|
Rail
Kit Sliding: RKS-02 |
|
Rail
Kit Mounted: RKM114* |
|
VisualStation: VS360HD |
|
Surveillance
Device License Pack |
|
Notes |
Certain
items may not be available in your location. Please contact your local
distributors for more information. |
|
All
memory modules will operate at the maximum frequency specified by the CPU
manufacturer. |
