97-718-009 | Ergotron Dual Monitor & Handle Kit - For Interactive Arm - Black

Part Number

97-718-009

Description

Dual Monitor & Handle Kit for Interactive Arm (black)

Includes

bow

two mounting brackets

handle

mounting hardware

* Outside width of monitor should be 21" to 24.5" (53 to 62 cm). This range accommodates 23" and 24" displays as well as some displays with screens as small as 22" or as large as 26". If the outside width is less than 21" (53 cm), a small gap will be present between the two displays. Displays with an outside width greater than 24.5" (62 cm) are not compatible

† Combined weight of displays can be no more than 36 lbs (16.4 kg). This kit adds an additional 6 lbs (2.7 kg) to your mounting solution. Your mounting solution’s weight capacity must be reduced by 6 lbs (2.7 kg) when using standard monitors less than or equal to 2.5" (64 mm) thick. Additional reduction may be required if monitors are greater than 2.5" (64 mm) thick. Exception: When used as a replacement bow on WorkFit Dual products, there is no reduction in capacity

Specially designed for use with Interactive Arms (45-296-026 or 45-304-026) but will also attach to other mounts with four-hole interface of 50 x 50 mm, 100 x 100 mm or 200 x 100 mm

Mounting Standard

VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)

This kit can be installed and used without the included handle

Product Dimensions

4.6"H x 29.1"W x 1.5"D (11.7 x 74 x 38 cm)

Shipping Dimensions

31.5" x 13.5" x 7" (80 x 34 x 17.5 cm)

Shipping Weight

9.2 lbs (4.2 kg)

Warranty

Five (5) years