MATREXX 70 ADD-RGB 3F | Deepcool Matrexx 70 RGB 3F Mid Tower Chassis

Deepcool DP-ATX-MATREXX70-BKG0P-3F Matrexx 70 3F RGB Mid Tower Chassis

Features

• 3*CF 120 RGB fans and 1*RGB LED strip pre-installed and synced
• Included ADD-RGB system controllable by either case button or motherboard, and compatible to other brands’ ADD-RGB products.
• Large mid tower case supporting up to E-ATX(330mm) motherboard.
• 228mm wide tower compartment with 30mm clearance for cable management
• Easy-to-install front and side panels
• Quick-mounting radiator/fan holders pre-installed at the front
• Supports installation of 120/140/240/280/360/420mm radiator liquid cooling system at front,
• 120/140/240/280/360mm radiator liquid cooling system at top, 120mm radiator liquid cooling system at rear
• Removable tempered glass PSU-HDD top cover, offering top-notch lighting ambient.
• Magnetic dust filters at the top, insert-in dust filters at bottom and front

Description

MATREXX 70 ADD-RGB 3F is a new-concept chassis specially designed for the enjoyment of DIY. By adopting numerous novel structural designs, its architecture yields convenience and flexibility in PC building. Meanwhile 3 * CF 120 RGB fans and 1* RGB LED strip are included to provide top-notch lighting effects. MATREXX 70 ADD-RGB 3F is ready to give you a boost of the gaming ambience.

• For DEEPCOOL/GAMERSTORM devices

• For other brand device

Friendly ADD-RGB Ecosystem Included

The ADD-RGB lighting system includes 5 pre-programmed lighting effects (dynamic color, static, breathing, comet and fashioncollision) and can be easily controlled by the RGB button on the I/O panel or motherboard. Meanwhile the special accessory pack enables the syncing between the products from Deepcool and other brands, thereby creating a friendly ADD-RGB ecosystem.

Easy-to-install Side Panel

The side panel is fixed with 1 groove + 2 screws design. The groove can hold the panel and prevent it from falling even with no screws mounted,which makes installation much easier. After installation, this unique fixation method will grant the glass panel even stress distribution, hence reduces the risk of cracking;

One-touch-release Front Panel

With the bottom hooked to case structure, and the top locked by a spring buckle, the front panel of MATREXX 70 ADD-RGB 3F can be released to “dismounting ready�state with just one touch. Once the “OPEN� button is pressed, the front panel will be released and held at a 5°angel, and is ready to be pulled out.

Removable radiator/fan Holder

The radiator/fan holder simplifies the installation and replacement of the radiator and fan, it’s especially effort-saving when you need to install the radiator and the fan on the different sides of the holder.

The holder supports up to 360mm radiator or 3*140mm fans.

Removable Glass PSU Shroud

In MATREXX 70 ADD-RGB 3F, DEEPCOOL creatively used tinted glass as the top cover of PSU shroud, which is pioneering in the industry.

The tinted glass can hide the power cables while reflecting the RGB lighting of your other parts, especially GPU, hence creating an infinite space visual effect. Effect Diagram of Light Bars Installed on the Power Shield (RGB Light Bars are included)

Flexible Ventilation Solutions with Excellent Performance

With air intake options at front and bottom, exhaust options at the top and rear, MATREXX 70 ADD-RGB 3F provides highly flexible ventilation solutions. Meanwhile the 15mm-wide front intake hole guarantees sufficient air supply, together with the low friction material applied on all meshes, the cooling efficiency is maximized.

Abundant Storage Support

A total of 6* 2.5’’ drives or 4*2.5’’ + 2* 3.5’’ drives can be mounted in MATREXX 70 ADD-RGB 3F. 2 SSD bays are fixed at the back of motherboard tray for quick installation. 2* 3.5/2.5’’ hard drive bays are mounted at the bottom of the case which are relocatable and removable.After removal, 2*120mm fans can be installed at the location.

Simple & Sleek Design

The front and side panels are made of full-sized, tinted tempered glass. They display your gears with a classy filter while keeping the overall look clean .

Spacious Interior

The case’s dimensions are 484×233×492mm, offering gigantic room to manage cables (170mm motherboard tray-to-glass clearance, 30mm motherboard tray-to-back plate clearance).

Motherboard support

• E-ATX( Up to 330mm )
• ATX
• Micro-ATX
• Mini-ITX

• Graphic cards support up to 380mm
• Equipped with large spacing - 170mm( Tower Room ) and 30mm ( cable sorting at the rear )
• Four 2.5inch independent hard disk lots and two 3.5/2.5inch hard disk spaces.
• As the dust screens are installed at the top, bottom and front, it provides remarkable anti-dust capabilities while being easy to clean.

Specifications