Interfaces |
|
Telephone Interfaces
One |
(1) FXS
port |
Network
Interfaces |
One (1) 10/100Mbps
auto-sensing ethernet port (RJ45) |
LED Indicators
|
POWER, INTERNET,
PHONE |
Factory Reset
Button |
Yes |
Voice, Fax,
Modem |
|
Telephony Features
|
Caller ID display or
block, call waiting, flash, blind or attended transfer, forward, hold, do
not disturb, 3-way conference |
Voice Codecs
|
G.711 with Annex I
(PLC) and Annex II (VAD/CNG), G.723.1, G.729A/B, G.726, iLBC, OPUS,
dynamic jitter buffer, advanced line echo
cancellation |
Fax Over
IP |
T.38 compliant Group 3
Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax
Pass-through |
Short/Long Haul Ring
Load |
5 REN: Up to 1km on 24
AWG |
Caller
ID |
Bellcore Type 1 &
2, ETSI, BT, NTT, and DTMF-based CID |
Disconnect
Methods |
Busy Tone, Polarity
Reversal/Wink, Loop Current |
Signaling |
|
Network
Protocols |
TCP/IP/UDP, RTP/RTCP,
HTTP/HTTPS, ARP/RARP, ICMP, DNS, DHCP, NTP, TFTP, SSH, STUN, SIP
(RFC3261), SIP over TCP/TLS, SRTP, TR-069 |
QoS |
Layer 2 (802.1Q VLAN,
SIP/RTP 802.1p) and Layer 3 (ToS, DiffServ, MPLS) |
DTMF
Method |
In-audio, RFC2833
and/or SIP INFO |
Provisioning and
Control |
HTTP, HTTPS, SSH, TFTP,
TR-069, secure and automated provisioning using AES encryption,
syslog |
Security |
|
Media |
SRTP |
Control |
TLS/SIPS/HTTPS |
Management |
Syslog support, SSH,
remote management using web browser |
Physical |
|
Universal Power
Supply |
Input: 100-240VAC,
50-60Hz |
|
Output:
5.0VDC/1.0A |
Environmental |
Operational: 32 104F or
0 40C |
|
Storage: 14 140F or -10
60C |
|
Humidity: 10 90%
Non-condensing |
Dimension and Weight
|
Dimensions: 100mm x
100mm x 29.5mm |
|
Weight: 102
g |
Compliance |
FCC:
Part15B |
|
CE: EN55032, EN55024,
EN61000-3-2, EN61000-3-3, EN60950-1 |
|
RCM:
A |