All stock codes associated to this product
, AENRHDSA35R, AENRHDSA35-R
Aluminum Removable Hard Drive kit (black color) for Serial ATA hard drive
Contents: Drive enclosure (AAHDSA35CS-R), Drive Cradle (AAHDSA35BY-R), 1 18" internal SATA data cable (AASAIDC18I)
The new Combo Hard Drive II for Serial ATA hard drive is one of the first hard drive kits in the market that enables any Serial ATA hard drive to be used as a hot swap removable hard drive and as an external Serial ATA hard. Both the drive enclosure and the drive bay are fully constructed with Aluminum for use in harsh and rough handling environment. The tough aluminum enclosure also provides sturdy hard drive protection and efficient heat dissipation for the high RPM Serial ATA hard drive. To match the color of your computers, you also have a choice of black or ivory color.
Product Features
- Support any 3.5" SATA or SATA II hard drive
- Use the hard drive as external Serial ATA hard drive
- Use the hard drive as a hot swap removable Serial ATA hard drive
- Hot swappable (1), hard drive can be removed or add to the system without restarting*
- Rugged aluminum construction for rough handling and fast cooling
- Cooling fan inside enclosure to improve air circulation
- Point to point Serial ATA connection (no cable to connect hard drive to enclosure)
- Power and hard drive access* indicators
- Keylock plus power control
- Install into any 5 1/4" drive bay as a removable hard drive
- OS independent
- Simple installation
*for the second generation of Combo Hard Drives with various improvements, click on the link for Saturn Combo Hard Drive
* Drive access signal is from Serial ATA controller. The primary drive (usually the drive C) cannot be removed from the system.
(1) Serial ATA hot swap feature works only with controllers basing on Silicon Image chip set from our inhouse testing. Other controllers that are not Silicon Image based may not support hot swap. You may consider adding one of the Addonics Serial ATA host controllers to your systems to ensure the hot swap capability. New controllers from Intel and other suppliers may finally support this feature. Please verify with your controller manufacturer if you need to have hot swap in your application. Hot swap is supported in Windows 2000 and XP only. On other OS, drive can be removed without crashing system. But replacing with a different drive can result in crashing the OS.
Specifications
Supported Drive Type:
|
3.5" SATA or SATA II Hard Drive |
Interface connector : |
Serial ATA
|
Power connectors: |
15-pin and 4-pin connectors |
Power source: |
PC power supply when used as removable hard drive 110/220V AC adapter when used as an External hard drive
|
Power control |
Integrated with key lock |
Power indicator |
LED on Drive cradle LED on External power cable
|
Hard drive access indicator |
LED on Drive cradle |
Cooling fan |
1 fan at front of drive enclosure |
Dimensions: |
7.48 x 5.75 x 1.65 in (190 x 146 x 42 mm) |
Weight: |
1 LB - 12 oz (drive enclosure and drive cradle set) |
Warranty: |
One Year |
System Requirements
- PC/AT or Compatible System
- One available 5 1/4" drive bay (for drive cradle installation)
- One Serial ATA port
- 486, Pentium or greater