AP-6532-66040-WR | Motorola AP6532 Wireless Access Point - 802.11a/b/g/n, Dual

Metal enclosure with external antenna connectors. For use in non-US countries only

 

 

The performance-focused dual radio 802.11n AP 6532 access point provides customers with higher throughput and dual-radio performance while benefiting from WiNG 5 intelligence at the edge. This versatile AP leverages Motorolas hallmark 802.11n band-unlocked radios, allowing IT to use the second radio to provide WiFi access or serve as a dedicated wireless sensor that scans both 2.4 and 5 Ghz bands for network assurance and security The access point will also continue to run if its connection to a local or remote controller is interrupted. The AP 6532 can serve as a virtual controller and coordinate the operation of up to 24 neighboring access points for mobility and QOS services.

 

The AP 6532 is a high performance dual radio 802.11n access point that offers higher throughput along with WiNG 5's direct forwarding, security, QoS services and site survivability. The second radio can be used for access or as a sensor for troubleshooting and security.

 

Automatic channel and power optimization
The AP 6532s SMART RF feature automatically optimizes power and channel selection so each user gets always-on high-quality access and mobility.
 

Gap-free security
Includes layer 2-7 stateful packet filtering firewall, AAA RADIUS services, Wireless IPS-lite, VPN gateway, and location-based access control. Users can also add role-based access control and AirDefense Wireless IPS and rogue detection for premium-level security vigilance.

Full performance using standard POE
The AP 6532 is designed to provide full 802.11n performance using standard and lower cost POE 802.1 (af).

Device mobility
Supports fast secure roaming at Layer 2 and Layer 3. In addition, the network optimizes mobile performance with load balancing, pre-emptive roaming and rate scaling.

Greater coverage per AP
The powerful 24 dBm radio increases coverage, performance and obstruction penetration versus 23 dBm radios. In addition, receiver sensitivity has been increased proportionally so users have and increased ability to maintain high-performance access.

Device and network acceleration
Device and network performance can be accelerated through a virtual LAN feature via the switch/controller. Each access point can be virtualized into four unique VLANs, which can be customized to direct broadcast traffic to the intended recipient. This reduces overall network traffic while improving device performance and battery life up to 25%. This also reduces the overall number of access points required to provide unique device services.

Easy deployment and maintenance
Requires no configuration or manual firmware maintenance. The Motorola wireless controller discovers access points on the network and automatically downloads all configuration parameters and firmware, greatly reducing installation, maintenance and troubleshooting costs for Layer 2 and Layer e deployments.

Multiband operation
Allows concurrent sensing on 2.4 GHz and 5.0 GHz frequency bands for multiband intrusion protection or troubleshooting.

Application support
Supports Call Admission Control for optimized VoWLAN performance, as well as video streaming and data throughput for 802.11a/b/g/n clients.

 

Electrical safety
UL 60950, cUL, EU EN 60950, TUV and UL 2043 (external antenna)

 

Integrated power over ethernet support
Standards-based IEEE 802.3af
 
Operating current
270mA (typical)

Operating voltage
802.3af supply: 48 VDC @ 12.95W (typical), 36 VDC to 57 VDC (range)

 

Electrostatic discharge
+/- 15 kV (Air), +/- 8 kV (contact)
 
Storage altitude
15, 000 ft./4572 m
Operating altitude
8, 000 ft./2438 m
 
Operating humidity
5%-95% (non-condensing)
Storage temperature
-40°F to 158° F/-40°C to 70° C
 
Operating temperature
32°F to 122° F/0°C to 50° C

 

Operating bands - EU
FCC EU 2.412 to 2.462 GHz 2.412 to 2.472 GHz 5.150 to 5.250 (UNII -1) 5.150 to 5.250 GHz 5.725 to 5.825 (UNI -3) 5.150 to 5.350 GHz 5.725 to 5.850 (ISM) 5.470 to 5.725 GHz (Country Specific) Japan 2.412 to 2.484 GHz 4.900 to 5.000 GHz 5.150 to 5.250 GHz
 
Maximum transmit power settings
24dBm
Operating channels
5GHz: All channels from 4920 MHz to 5825 MHz
2.4GHz: Chan 1-13 (2412-2427 MHz), Chan 14 (2484 MHz) Japan only
Actual operating frequencies depend on national regulatory limits
 
Uplink
Auto-sensing 10/100/1000Base-T Ethernet
Wireless medium
Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM), and Spatial Multiplexing (MIMO)
 
Network standards
802.11a, 802.11b, 802.11g, 802.11n
Data rates supported
802.11b/g: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, and 54Mbps; 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54Mbps; 802.11n: MCS 0-15 up to 300Mbps

 

 

LEDs
2 LED indicators with multiple modes indicating 2.4GHz/5 GHz Activity, Power, Adoption and Errors
 
Available mount configurations
Internal Antenna: Ceiling-mount (to suspended ceiling T-bars, below tile); wall mount
External Antenna: Ceiling-mount (above tile); wall-mount

Weight
Internal Antenna: 2.0 lbs/.91 kg
External Antenna: 2.5 lbs/1.14 kg
 
Dimensions (HxWxD)
Internal Antenna: 9.5 in. L x 7.5 in. W x 1.7 in. H (24.13 cm L x 18.916 cm W x 4.36cm H)
External Antenna: 8.5 in. L x 5.6 in. W x 1.5 in. H (21.64 cm L x 14.10 cm W x 3.771 cm H)