28 Port Gigabit SmartPro Switch
DGS-1510-28X
Overview
The DGS-1510 Series is D-Links latest generation of SmartPro switches with 10G port connectivity, making them ideal for deployment in SME/SMB core environments. The DGS-1510 Series provides a reliable, scalable, and modular interconnection between core switches and edge switches with rich capabilities and simplified flexibility. Available in 16, 24 and 48 10/100/1000 Mbps port models, these switches also include four optical ports including 2 Gigabit SFP and 2 10G SFP+ ports. The 24 and 48 port versions are also available with 4 10G SFP+ ports instead of the 2 Gigabit plus 2 10G configuration.
10G SFP+ Stacking/Uplink Ports
Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix from any of the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting.
Flexibility and Scalability
The DGS-1510 Series supports virtual stacking via D-Links Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM reduces the number of IP address needed in the network and allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialized stacking cables and removes distance barriers that can limit topology options when using other stacking technology.
Extensive Layer 2 Features
The DGS-1510 Series switches are equipped with a complete lineup of Layer 2 features including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port or VLAN and automatically shut down the affected port or VLAN. The Cable Diagnostics feature, designed primarily for administrators and customer service representatives, can quickly discover the type of error on cables and determine the cable quality.
QoS, Bandwidth Control
The DGS-1510 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology built into D-Link Smart Switches. This technology consolidates data and surveillance video transmission through a single SmartPro switch, sparing businesses the expense of maintaining expensive dedicated hardware and facilities. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. The Auto Voice VLAN technology enhances VoIP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority and an individual VLAN, these features guarantee the quality and security of VoIP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice and video packets take precedence over other packets. In addition, with Bandwidth Control, network administrators can reserve bandwidth for important functions that require more bandwidth or might require high priority.
Secure your Network
D-Links innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network by screening ingress traffic based on MAC or IP addresses. The DGS-1510 Series includes ARP Spoofing Prevention, which protects from attacks on the Ethernet network that may allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet Control ACLs to block invalid packets that contain fake ARP messages. For added security, the DHCP Server Screening feature screens rogue DHCP server packets from user ports to prevent unauthorized IP assignment.
IPv6 Ready
The DGS-1510 Series is IPv6 ready and supports various IPv6 functions such as MLD Snooping, IPv6 ACL/QoS, and IMPBv6 to ensure seamless integration of next generation networks. The DGS-1510 Series also supports a IPv4/v6 dual stack function that allows the switch to act as a bridge between IPv4 and IPv6 networks. Finally, all DGS-1510 Series are certified to be IPv6 Ready Logo Phase 2, which guarantees interoperability for IPv6 environments.
Versatile Management
The DGS-1510 Series provides a D-Link Network Assistant Utility and a web based management interface that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant Utility allows customers to easily discover multiple D-Link SmartPro Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup of the SmartPro Switches. Switches within the same L2 network segment that are connected to the users PC are displayed on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices including password changes and firmware upgrades. The DGS-1510 Series also supports D-View 6.0 and a fully featured Command Line Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network Management System that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security. CLI management of the switches is possible via console port and Telnet interfaces. This makes it possible to adjust basic settings, passwords, configuration files, and firmware with ease.
Layer 3 Traffic Management
The DGS-1510 Series supports advanced traffic management features, including static routing. In static routing, IP routes are manually entered into a routing table, which allows for communication between different user groups in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces, making the network run faster and more efficiently. Because the switches can manage internal routing, the network router can be assigned to handle external traffic routing only.
Energy Saving
DGS-1510 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1510 switches offer advanced power-saving settings including port shutoff, LED shutoff, and system hibernation based on custom scheduling profiles. The profiles can also be applied to the PoE switch so that there is no unnecessary power consumption during off hours.
Features
Layer
Layer 2+
Main type of ports
1000BASE-T Gigabit Ethernet
Number of ports
16 to 28 ports
Type of uplink ports
10GbE SFP+
Switching capacity
128 Gbps
Form Factor
Rackmountable
Housing
Metal
Physical stacking
Up to 6 devices
Virtual stacking (up to 32 devices)
Technical Specifications
General
Port Standards & Functions
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
802.3ae 10 GbE,
IEEE 802.3x Flow Control for Full-Duplex Mode,
Auto-negotiation
Number of Ports
DGS-1510-20: 16 10/100/1000 Mbps, 2 Gigabit SFP, 2 10G SFP+
DGS-1510-28: 24 10/100/1000 Mbps, 2 Gigabit SFP, 2 10G SFP+
DGS-1510-28P: 24 10/100/1000 Mbps PoE capable, 2 Gigabit SFP, 2 10G SFP+
DGS-1510-28X: 24 10/100/1000 Mbps, 4 10G SFP+
DGS-1510-52: 48 10/100/1000 Mbps, 2 Gigabit SFP, 2 10G SFP+
DGS-1510-52X: 48 10/100/1000 Mbps, 4 10G SFP+
Network Cables
UTP Cat. 5, Cat. 5e (100 m max.) EIA/TIA-568 100-ohm STP (100 m max.)
Full/Half Duplex
Full/half duplex for 10/100 Mbps and Gigabit speed
Media Interface Exchange
Auto or configurable MDI/MDIX
Performance
Switching Capacity
DGS-1510-20: 76 Gbps
DGS-1510-28: 92 Gbps
DGS-1510-28P: 92 Gbps
DGS-1510-28X:128 Gbps
DGS-1510-52: 140 Gbps
DGS-1510-52X: 176 Gbps
Transmission Method
Store-and-forward
MAC Address Table
16,000 entries per device
MAC Address Update
Up to 512 static MAC entries,
Enable/disable auto-learning of MAC addresses
Maximum 64 bytes Packet Forwarding Rate
DGS-1510-20: 56.54 Mpps
DGS-1510-28:68.45 Mpps
DGS-1510-28P:68.45 Mpps
DGS-1510-28X:95.24 Mpps
DGS-1510-52:104.16 Mpps
DGS-1510-52X: 130.95 Mpps
Packet Buffer Memory
DGS-1510-20: 1.5 MB per device
DGS-1510-28:1.5 MB per device
DGS-1510-28P:1.5 MB per device
DGS-1510-28X: 1.5 MB per device
DGS-1510-52: 3 MB per device
DGS-1510-52X: 3 MB per device
PoE (DGS-1510-28P only)
PoE Standard IEEE 802.3af, 802.3at
PoE Capable Ports Ports 1 to 24: Up to 30 W
PoE Power Budget Max. 193 W
Physical & Environmental
AC Input
100 to 240 VAC 50/60 Hz internal universal power supply
Maximum Power Consumption
DGS-1510-20: 20.3 W
DGS-1510-28:24 W
DGS-1510-28P:238.7 W (PoE on), 29 W (PoE off)
DGS-1510-28X: 22.3 W
DGS-1510-52:38.4 W
DGS-1510-52X: 44.2 W
Standby Power Consumption
DGS-1510-20: 11.4W/100V 12.2W/240V
DGS-1510-28: 14.6W/100V 15.2W/240V
DGS-1510-28P: 22.7W/100V 21.0W/240V
DGS-1510-28X: 14.6W/100V 15.2W/240V
DGS-1510-52: 27.3W/100V 27.6W/240V
DGS-1510-52X: 28.6W/100V 28.9W/240V
Smart Fan Quantity
DGS-1510-20: 1
DGS-1510-28: 1
DGS-1510-28P: 2
DGS-1510-28X: 1
DGS-1510-52:2
DGS-1510-52X: 2
Acoustics
DGS-1510-20: 43.8 dB(A)
DGS-1510-28: 43.8 dB(A)
DGS-1510-28P: 46.4 dB(A)
DGS-1510-28X: 42.7dB(A)
DGS-1510-52: 44.2 dB(A)
DGS-1510-52X: 45.8 dB(A)
Heat Dissipation
DGS-1510-20: 41.6 BTU/hr
DGS-1510-28: 72.3 BTU/hr
DGS-1510-28P:814.0 BTU/hr
DGS-1510-28X: 76.0 BTU/hr
DGS-1510-52: 130.9 BTU/hr
DGS-1510-52X: 138.8 BTU/hr
Operation Temperature
23 to 122 F (-5 to 50 C)
Storage Temperature
-4 to 158 F (-20 to 70C)
Operation Humidity
0% to 95% non-condensing
Storage Humidity
0% to 95% non-condensing
Dimensions
DGS-1510-20:
11 x 7.09 x 1.73 inches (280 x 180 x 44 mm)
19 standard rack mounting width, 1U height
DGS-1510-28:
17.36 x 8.26 x 1.73 inches (440 x 210 x 44 mm)
19 standard rack mounting width, 1U height
DGS-1510-28P:
17.36 x 8.26 x 1.73 inches (440 x 210 x 44 mm)
19 standard rack mounting width, 1U height
DGS-1510-28X:
17.36 x 8.26 x 1.73 inches (440 x 210 x 44 mm)
19 standard rack mounting width, 1U height
DGS-1510-52:
17.36 x 9.84 x 1.73 inches (440 x 250 x 44 mm)
19 standard rack mounting width, 1U height
DGS-1510-52X:
17.36 x 9.84 x 1.73 inches (440 x 250 x 44 mm)
19 standard rack mounting width, 1U height
Weight
DGS-1510-20: 2.7 lbs (1.24 kg)
DGS-1510-28: 4.4 lbs (2.00 kg)
DGS-1510-28P: 5.6 lbs (2.54 kg)
DGS-1510-28X: 4.4 lbs (2.00kg)
DGS-1510-52: 5.3 lbs (2.40 kg)
DGS-1510-52X: 5.3 lbs (2.40 kg)
Diagnostic LEDs
Power/Stacking ID/Fan (per device),
Link/Activity/Speed (per 10/100/1000 Mbps port),
Link/Activity/Speed (per Gigabit SFP port),
Link/Activity/Speed (per 10G SFP+ port)
Certifications
CE, FCC, C-Tick, VCCI, BSMI, CCC
Safety cUL, CB
Software Features
Stackability
Virtual Stacking Support
D-Link Single IP Management
Up to 32 devices per virtual stack
Physical Stacking
Supports Duplex Chain/Ring topology
Up to 40G stacking bandwidth full duplex
Up to 6 units per stack
L2 Features
MAC Address Table: 16K
Flow Control
802.3x Flow Control
HOL Blocking Prevention
Jumbo Frame up to 9000 Bytes
IGMP Snooping
IGMP v1/v2 Snooping
IGMP v3 awareness
Supports 512 IGMP groups
Supports 128 static multicast addresses
IGMP per VLAN
Supports IGMP Snooping Querier
Host-based IGMP Snooping Fast Leave
MLD Snooping
Supports MLD v1/v2 awareness
Supports 512 groups
Supports 128 Static Multicast Addresses
Per VLAN MLD Snooping
Host-based MLD Fast Leave
MLD Snooping Querier
Spanning Tree Protocol
802.1D STP
802.1w RSTP
802.1s MSTP
Loopback Detection
802.3ad Link Aggregation
Max. 32 groups per device/8 ports per group
Port Mirroring
Support 4 mirroring groups
One-to-One, Many-to-One
Supports Mirroring for Tx/Rx/Both
Multicast Filtering
Forwards all unregistered groups
Filters all unregistered groups
LLDP, LLDP-MED
VLAN
802.1Q Tagged VLAN
4K VLAN Groups
Configurable VID: 0~4094
GVRP
Asymmetric VLAN
Auto Voice VLAN
Auto Surveillance VLAN
Quality of Service (QoS)
802.1p Quality of Service
Queue Handling
Strict Priority Queue (SPQ)
Weighted Round Robin (WRR)
Deficit Round Robin (DRR)
SPQ + WRR
8 queues per port
Bandwidth Control
Port-based (Ingress/Egress, min. granularity for 10/100/1000 BASE-T ports is 64 Kb/s)
CoS based on
802.1p priority
VLAN
MAC address
Ether type
IP address
DSCP
Protocol type
TCP/UDP port number
DSCP of IPv6 Traffic Class
IPv6 flow label
L3 Features
ARP
256 Static ARP
Supports Gratuitous ARP
IPv6 Neighbor Discovery (ND)
8 IP Interfaces
Default Routing
Static Routing
64 IPv4 Static Route Entries
32 IPv6 Static Route Entries
Access Control List (ACL)
ACL based on
802.1p priority
VLAN
MAC address
Ether type
IP address
DSCP
Protocol type
TCP/UDP port number
DSCP of IPv6 Traffic Class
IPv6 flow label
ACL Actions
Permit
Deny
Max. 256 access list
Max. 768 rules
Single or multiple ports (each rule)
Time-based ACL
ACL Statistics
Security
Port Security
Supports up to 128 MAC addresses per port
Broadcast/Multicast/Unicast Storm Control
Dynamic ARP Inspection
Static MAC
D-Link Safeguard Engine
DHCP Server Screening
ARP Spoofing Prevention
Max. 64 entries
SSH
Supports v2
Supports IPv4/IPv6
BPDU Attack Protection
SSL
Supports v1/v2/v3
Supports IPv4/IPv6
Traffic Segmentation
IP-MAC-Port Binding
DHCP snooping
IP Source Guard
Dynamic ARP inspection
DHCPv6 Guard
RA Guard
IPv6 Snooping
IPv6 Source Guard
DoS Attack Prevention
AAA
Compound Authentication
802.1X Port and MAC-based Authentication
Supports RADIUS and Local Server
Supports EAP, OTP, TLS, TTLS, PEAP
Web-based Access Control (WAC)
Port-based Access Control
Host-based Access Control
Dynamic VLAN Assignment
Guest VLAN
MAC-based Access Control (MAC)
Port-based Access Control
Host-based Access Control
Dynamic VLAN Assignment
Japan Web-based Access Control (JWAC)
Port-based Access Control
Host-based Access Control
Dynamic VLAN Assignment
OAM
Cable Diagnostics
Factory Reset
Management
CLI
Telnet Server
TFTP Client
IPv6 Neighbor Discovery
Configurable MDI/MDIX
SNMP
Supports v1, v2c, v3
SNMP Trap
System Log
Max. 10,000 log entries
DHCP Client
D-Link Network Assistant support
SNTP
ICMPv6
IPv4/v6 Dual Stack
DHCP Auto Configuration
RMON v1
Debug Command
Dual Image
Web based GUI
D-Link Green 3.0 Technology
Power Saving by:
Link Status
LED or Port Shutoff
System Hibernation mode
Time-based PoE (PoE model only)
Optional SFP Transceivers
DEM-310GT 1000BASE-LX, single-mode, 10 km
DEM-311GT 1000BASE-SX, multi-mode, 550 m
DGS-712 1000BASE-T to SFP transceiver
Optional SFP+ Transceivers
DEM-431XT-DD 10GBASE-SR SFP+ Transceiver (with DDM), 80m: OM1 & OM2 MMF, 300m: OM3 MMF
DEM-432XT-DD 10GBASE-LR SFP+ Transceiver (with DDM), 10km
DEM-435XT-DD 10GBASE-LRM SFP+ Transceiver (with DDM), 220m
Optional SFP+ Direct Attach Stacking Cables
DEM-CB100S 10-GbE SFP+ 1 m Direct Attach Cable
DEM-CB300S 10-GbE SFP+ 3 m Direct Attach Cable
DEM-CB700S 10-GbE SFP+ 7m Direct Attach Cable
Ordering Information
Model number / Description / Warranty
DGS-1510-20 / 20-port Gigabit Stackable SmartPro Switch including 2 SFP ports & 2 10GbE SFP+ ports / Limited Lifetime
DGS-1510-28 / 28-port Gigabit Stackable SmartPro Switch including 2 SFP ports & 2 10GbE SFP+ ports / Limited Lifetime
DGS-1510-28P / 28-port Gigabit Stackable SmartPro PoE Switch including 2 SFP ports & 2 10GbE SFP+ ports / Limited Lifetime
DGS-1510-28X / 28-port Gigabit Stackable SmartPro Switch including 4 10GbE SFP+ ports / Limited Lifetime
DGS-1510-52 / 52-port Gigabit Stackable SmartPro Switch including 2 SFP ports & 2 10GbE SFP+ ports / Limited Lifetime
DGS-1510-52X / 52-port Gigabit Stackable SmartPro Switch including 4 10GbE SFP+ ports / Limited Lifetime
Networking
