All stock codes associated to this product
MTFDDAK240MBB1AE1ZABYY, MTFDDAK240MBB-1AE1ZABYY, LX22015
M500DC 2.5-Inch SATA NAND Flash SSD
MTFDDAK240MBB-1AE1ZABYY
Features
Micron®20nm MLC NAND Flash
RoHS-compliant package
SATA 6 Gb/s interface
ATA modes supported
PIO mode 3, 4
Multiword DMA mode 0, 1, 2
Ultra DMA mode 0, 1, 2, 3, 4, 5
Enterprise sector size support – 512-byte
Hot-plug capable
Native command queuing support with 32-com-mand slot support
ATA-8 ACS2 command set compliant
ATA security feature command set and password login support
Security erase command set: fast and secure erase
Self-monitoring, analysis, and reporting technology (SMART) command set
120GB performance (steady state)1, 2
Sequential 128KB read: 425 MB/s
Sequential 128KB write: 200 MB/s
Random 4KB read: 63,000 IOPS
Random 4KB write: 23,000 IOPS
READ latency: 0.50ms
WRITE latency: 1.5ms
240GB performance (steady state)
Sequential 128KB read: 425 MB/s
Sequential 128KB write: 330 MB/s
Random 4KB read: 63,000 IOPS
Random 4KB write: 33,000 IOPS
READ latency: 0.50ms
WRITE latency: 1.5ms
480GB performance (steady state)
Sequential 128KB read: 425 MB/s
Sequential 128KB write: 375 MB/s
Random 4KB read: 63,000 IOPS
Random 4KB write: 35,000 IOPS
READ latency: 0.50ms
WRITE latency: 1.5ms
800GB performance (steady state)
Sequential 128KB read: 425 MB/s
Sequential 128KB write: 375 MB/s
Random 4KB read: 65,000 IOPS
Random 4KB write: 24,000 IOPS
READ latency: 0.50ms
WRITE latency: 1.5ms
Reliability – Mean time to failure (MTTF): 2 million device hours
Static and dynamic wear leveling
Uncorrectable bit error rate (UBER): <1 sector per 1016 bits read
End-to-end data protection
Enhanced power-loss data protection with data protection capacitor monitoring
Endurance: Total bytes written (TBW ) – 120GB: 0.5PB; 240GB: 1.0PB; 480GB: 1.9PB;
800GB: 1.9PB
Capacity (unformatted): 120GB, 240GB, 480GB, 800GB
Mechanical: 7.0mm height
SATA connector: 5V ±10%
2.5-inch drive: 100.2mm x 69.85mm x 7.0mm
Field-upgradeable firmware
Power consumption: <6.0W (TYP); <6.3W (TYP) for 800GB
Operating temperature– Commercial (0°C to 70°C)
Notes:
1. Typical I/O performance numbers as meas-ured using Iometer with a queue depth of 32 and write cache disabled.
2. 4KB transfers used for READ/WRITE latency values.
3. The product achieves a MTTF based on pop-ulation statistics not relevant to individual units.
4. 1GB = 1 billion bytes; formatted capacity is less.
5. Drive case temperature.
Warranty : Contact your Micron sales representative for further information regarding the product, Including product warranties.
