All stock codes associated to this product
DGS151028, DGS-1510-28, DLKDGS151028, 790069399466, 790069402807
Overview
The DGS-1510 Series is D-Links latest generation of
SmartPro switches with 10G port connectivity, making them ideal for deployment
in SME/SMB core environments. The DGS-1510 Series provides a reliable, scalable,
and modular interconnection between core switches and edge switches with rich
capabilities and simplified flexibility. Available in 16, 24 or 48 10/100/1000
Mbps port models, these switches also include 2 Gigabit SFP ports and 2 10G SFP+
ports.
Two 10G SFP+ Stacking/Uplink
Ports
Depending on whether linear or fault-tolerant ring
stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to
create a physical stack. Six units or 288 Gigabit ports can be configured as a
stack using optional direct attach cables to provide high bandwidth on the
DGS-1510 Series with cost efficiency. Users can mix from any of the DGS-1510
SmartPro series in a single stack to allow simultaneous and easy configuration,
management and troubleshooting.
Flexibility and
Scalability
The DGS-1510 Series supports virtual stacking via D-Links
Single IP Management (SIM), allowing up to 32 devices to be managed via a single
IP. This simplifies management of small workgroups or wiring closets while
allowing the network to be scaled to handle increased bandwidth demand. SIM
reduces the number of IP address needed in the network and allows switches to be
stacked together over Ethernet instead of using physical uplink or stacking
ports. This eliminates the need for specialized stacking cables and removes
distance barriers that can limit topology options when using other stacking
technology.
Extensive
Layer 2 Features
The DGS-1510 Series switches
are equipped with a complete lineup of Layer 2 features including IGMP Snooping,
Port Mirroring, Spanning Tree, and Link Layer Discovery Protocol (LLDP). The
IEEE 802.3x Flow Control function allows servers to directly connect to the
switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit
ports provide high-speed data pipes to servers with minimum data transfer loss.
Network maintenance features include Loopback Detection and Cable Diagnostics.
Loopback Detection is used to detect loops created by a specific port or VLAN
and automatically shut down the affected port or VLAN. The Cable Diagnostics
feature, designed primarily for administrators and customer service
representatives, can quickly discover the type of error on cables and determine
the cable quality.
QoS & Bandwidth
Control
The DGS-1510 Series supports
Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP
and video surveillance deployments. Auto Surveillance VLAN is a new,
industry-leading technology built into D-Link Smart Switches. This technology
consolidates data and surveillance video transmission through a single SmartPro
switch, sparing businesses the expense of maintaining expensive dedicated
hardware and facilities. ASV also ensures the quality of real-time video for
monitoring and control without compromising the transmission of conventional
network data. The Auto Voice VLAN technology enhances VoIP service by
automatically placing voice traffic from an IP phone to an assigned VLAN. With
higher priority and an individual VLAN, these features guarantee the quality and
security of VoIP traffic. Furthermore, the DSCP markings on Ethernet packets
enable different levels of service to be assigned to network traffic. As a
result, these voice and video packets take precedence over other packets. In
addition, with Bandwidth Control, network administrators can reserve bandwidth
for important functions that require more bandwidth or might require high
priority.
Secure
your Network
D-Links innovative Safeguard
Engine protects the switches against traffic flooding caused by virus attacks.
The switches also support 802.1X port-based authentication, allowing the network
to be authenticated through external RADIUS servers. In addition, the Access
Control List (ACL) feature enhances network security and helps to protect the
internal IT network by screening ingress traffic based on MAC or IP addresses.
The DGS-1510 Series includes ARP Spoofing Prevention, which protects from
attacks on the Ethernet network that may allow an intruder to sniff data frames,
modify traffic, or bring traffic to a halt altogether by sending fake ARP
messages to the network. To prevent ARP Spoofing attacks, the switch uses Packet
Control ACLs to block invalid packets that contain fake ARP messages. For added
security, the DHCP Server Screening feature screens rogue DHCP server packets
from user ports to prevent unauthorized IP assignment.
IPv6
Ready
The DGS-1510 Series is IPv6
ready and supports various IPv6 functions such as MLD Snooping, IPv6 ACL/QoS,
and IMPBv6 to ensure seamless integration of next generation networks. The
DGS-1510 Series also supports a IPv4/v6 dual stack function that allows the
switch to act as a bridge between IPv4 and IPv6 networks. Finally, all DGS-1510
Series are certified to be IPv6 Ready Logo Phase 2, which guarantees
interoperability for IPv6 environments.
Versatile
Management
The DGS-1510 Series provides
a D-Link Network Assistant Utility and a web based management interface that
enables administrators to remotely control their network down to the port level.
The D-Link Network Assistant Utility allows customers to easily discover
multiple D-Link SmartPro Switches within the same L2 network segment. With this
utility, users do not need to change the IP address of their PC. It also
simplifies the initial setup of the SmartPro Switches. Switches within the same
L2 network segment that are connected to the users PC are displayed on screen
for instant access. This allows extensive switch configuration and basic setup
of discovered devices including password changes and firmware upgrades. The
DGS-1510 Series also supports D-View 6.0 and a fully featured Command Line
Interface (CLI) via dedicated out-of-band console port. D-View 6.0 is a Network
Management System that allows for the central management of critical network
characteristics such as availability, reliability, resilience, and security. CLI
management of the switches is possible via console port and Telnet interfaces.
This makes it possible to adjust basic settings, passwords, configuration files,
and firmware with ease.
Layer
3 Traffic Management
The DGS-1510 Series supports
advanced traffic management features, including static routing. In static
routing, IP routes are manually entered into a routing table, which allows for
communication between different user groups in different VLAN segments in a
network. The switch can directly handle inter VLAN routing using multiple
interfaces, making the network run faster and more efficiently. Because the
switches can manage internal routing, the network router can be assigned to
handle external traffic routing only.
Energy
Saving
DGS-1510 switches are
capable of conserving power without sacrificing operational performance or
functionality by using D-Link Green 3.0 technology. Using the 802.3az Energy
Efficient Ethernet standard, the network will automatically decrease the power
usage when traffic is low with no setup required. For environments not fully
supporting the standard, DGS-1510 switches offer advanced power-saving settings
including port shutoff, LED shutoff, and system hibernation based on custom
scheduling profiles. The profiles can also be applied to the PoE switch so that
there is no unnecessary power consumption during off
hours.
Networking
