Shuttle XH610 XPC Slim Barebone

Chassis

Slim 3.5-litre chassis, colour: black

Dimensions: 238 x 200 x 72.5 mm (LWH without rubber feet) = ca. 3.5-litre

Height including rubber feet: 73.3 mm

Weight: 2.2 kg net, 3.5 kg gross

Open front - without covers for optical drive and front panel connectors

Hole for Kensington Lock at the backpanel

Operation position horizontal or even vertical with the optional stand PS01

Power Adapter

External 120 W power adapter (fanless)

Input: 100~240 V AC, 50/60 Hz

Output: 19 V DC, max. 6.32 A, max. 120 W output wattage

DC Connector: 5.5 / 2.5mm (outer/inner diameter)

AC mains cable: 3 pins, ca. 1.8 m length, with C5/C6 coupler (called "Mickey Mouse" or "Clover-leaf") for the power adapter and CEE-7/7 plug with earth-contact (type E+F) for the power outlet

Remark: the DC-input of the computer supports an external power source with either 12V5% or 19V5%.

Operating System

This system comes without operating system.

It is compatible with Windows 10/11 and Linux (64-bit)

Processor support

Processor Socket LGA1700

Supports Intel Core i9 / i7 / i5 / i3, Pentium Gold and Celeron processors

Supports 12th generation Intel Core processors, codename "Alder Lake-S" in 14 nm process technology

Supports processors with integrated graphics only [5]

Maximum supported processor power consumption (TDP) = 65 W

Does not support the unlock-function of Intel K-Series processors.

The processor integrates PCI-Express, memory controller

and the graphics engine on the same die.

(Performance features depend on processor type)

Please refer to the support list for detailed processor support information at global.shuttle.com.

Processor heat-pipe cooling

Processor cooling with heat-pipe technology and two fans (6cm)

Mainboard / Chipset / BIOS

Mainboard in Mini-ITX form factor 17 x 17 cm

Chipset: Intel H610

AMI BIOS in 32 MB EEPROM

All capacitors are high quality solid capacitors

Supports hardware monitoring and Watchdog functionality

Supports Unified Extensible Firmware Interface (UEFI)

Supports power on after power failure [1]

Supports Firmware TPM v2.0 (fTPM)

Memory support

2x SO-DIMM slot with 260 pins

Supports DDR4-3200/2933/2666/2400/2133 (PC4-25600/23466/21300/19200/17000) SDRAM at 1.2 V

Supports Dual Channel mode

Supports a maximum of 32 GB per DIMM,

maximum total size: 64 GB

Supports two unbuffered DIMM modules (no ECC or registered)

Integrated Graphics

The features of the integrated Intel UHD graphics function

depend on the processor type used [5].

The PC features three video outputs:

- 1x HDMI v2.0b (supports 1080p/60 and 2160p/60)

- 1x DisplayPort v1.4a (supports 1080p/60 and 2160p/60)

- 1x Analog VGA (15-pin D-Sub, supports 1080p/60)

Supports three independent displays simultaneously with the integrated graphics function.

Hardware video decoding/encoding: H.264, H. 265 (8- and 10-bit, encoding via QuickSync), VP9 (10-bit VP9 can only be decoded)

5.1-channel audio

Audio Realtek ALC 897/662/888 High-Definition Audio

Three analog audio connectors (3.5mm) at the backpanel:

1) Front line-out (head-phones)

2) Rear Surround line-out (shared with microphone input)

3) Center line-out (shared with line-in)

Digital multi-channel audio output: by HDMI and DisplayPort

Dual LAN Controller

Dual network with two RJ45 ports with two status LEDs each

- yellow LED: lights up when data transfer is active

- greed LED for speed mode: off at 10 Mbps, lights up when 10 Mbit or higher

Used network chips:

1) Intel 225 supports 100 / 1.000 / 2.500 Mbps data transfer rate

2) Intel 219LM supports 10 / 100 / 1.000 Mbps data transfer rate

PCIe interface

Supports WAKE ON LAN (WOL)

Supports network boot by Preboot eXecution Environment (PXE)

M.2-2280M SSD slot

The M.2 2280M slot provides the following interfaces:

- PCI-Express Gen. 3.0 X4, supports NVMe

- SATA v3.0 (max. 6 Gbps)

It supports M.2 cards with a width of 22 mm

and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).

Supports M.2 SSDs with SATA or PCI-Express interface

M.2-2230E slot for WLAN cards

Interfaces: PCI-Express Gen. 2.0 X1 und USB 2.0

Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)

Supports WLAN expansion cards

Optional Shuttle accessory: WLN-M / WLN-M1 [4]

Drive connectors

3x Serial-ATA connector, max. 6 Gbps

Supports NCQ and AHCI

Storage Bays

This system features three drive bays:

1) supports one optical drive (ODD) in 5.25" slimline format with 12.7 mm height - this bay can alternatively be used for a 2.5" drive

2) upper 2.5" bay supports one 2.5" drive with max. 12.5 mm height

3) lower 2.5" bay supports one 2.5" drive with max. 9.5 mm height

The system includes the following pre-installed cables:

- 2x Power cable for 2.5" drives (5 Volt [6])

- 1x SATA cable for one 2.5" drive

- 1x combo connector (SATA and power) for an optical slimline drive (DVD or Blu-ray)

Note: This system is ready for one 2.5" drive (SSD or hard disk) and one optical drive in slimline format to be installed.

For further 2.5" drives, additional SATA cables are required. For a possible third 2.5" drive also four screws M3x4 are required.

The optional accessory PHD4 allows the installation of a 3.5" hard disk [8].

Front Panel connectors

Microphone input

Audio Line-out (headphones)

1x USB 3.2 Gen 1 Type A ( max. 5 Gbps, blue)

1x USB 3.2 Gen 1 Type C ( max. 5 Gbps)

2x USB 2.0 (black)

Power button

Power LED (blue)

HDD LED (yellow)

Back Panel connectors

1x DisplayPort 1.4a audio/video output [2]

1x HDMI 2.0b audio/video output

1x Analog VGA video output (15-pin D-Sub)

2x USB 3.2 Gen 1 Type A (max. 5 Gbps, blue)

2x USB 2.0 (black)

2x RJ45 LAN (1 Gbps and 2.5 Gbps)

1x COM (RS232) - on the right side

1x COM (RS232/422/485) - middle/down

3x Audio 3.5mm (Line-in, Line-out, Mic-in)

1x DC-input connector for external power adapter (supports 12V5% or 19V5%)

1x 4-pin connector (2.54 mm pitch) supports:

- external power on button (see optional  accessory CXP01)

- Clear CMOS function

- +5V DC voltage for external components

2x Perforation for Wireless LAN antennas

1x Hole for Kensington Lock

Other onboard connectors

Jumper J4 for power-on-after-power-fail (hardware solution) [1]

Front connectors for power button, LEDs, USBs, audio ports

USB 2.0 headers (4-pin)

4x RS232 COM port (2x5-pin header, 2 mm pitch) - 1x occupied

Two 4-pin fan connectors (one occupied by the CPU cooling system)

SATA power connectors: 5V (4-pin, occupied) and 12V (3-pin)

Supplied Accessories

Multi-language installation guide (EN, DE, FR, ES, JP, KR, SC, TC)

DVD with Windows driver software and manuals in PDF format

Pre-installed SATA and power cables for one 2.5" drive and one slimline drive

External power adapter with ca. 1.8m AC power cord (with protective-earth contacts)

Protector cap for the CPU socket (do not use if heat-pipe or fan is mounted)

CPU heatpipe cooling system pre-installed with heatsink compound

2 screws (M3x5, silver) for installation of two M.2 cards

8 screws (M3x4, black) for installation of two 2.5" drives

4 screws (M2x2.5, silver) for installation of an optional slimline drive

Optional Accessory

- PS01: Vertical stand

- PV02: VESA mount

- WLN-M (802.11ac, Wifi 5) or WLN-M1 (802.11ax, Wifi 6): WLAN module [4]

- PHD4: 3.5" Hard Disk Rack [8]

- CXP01: adapter cable for external power button

- PCM31: Adapter for three additional RS232 COM ports [3]

Environmental Specifications

Operating temperature range: 0~50C [7]

Relative humidity range: 10~90% (non-condensing)

Conformity and Certifications

EMI: CE, UKCA, FCC, BSMI, RCM, VCCI

Safety: CB 60950/62368, cTUVus, BSMI

Other: RoHS, Energy Star, ErP

This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:

(1) 2004/108/EC relating to electromagnetic compatibility (EMC),

(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),

(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)