D-Link DGS-1210-10P 10-Port Gigabit WebSmart PoE Switch w. 8-Port PoE UTP & 2-Port SFP

Overview

The DGS-1210 Series is the latest generation of D-Link Gigabit Web Smart Switchesfeaturing D-Link Green 3.0 technology. The switches comply with the IEEE 802.3az EnergyEfficient Ethernet standard. Support for IPv6 management and configuration featuresensures your network remains protected after an upgrade from IPv4 to IPv6. By offeringmultiple management options, these switches allow quick deployment, infrastructureexpansion, and seamless upgrades. Targeting small and medium sized businesses, theDGS-1210 Web Smart switches provide functionality, security, and manageability for afraction of the standard cost of ownership.

The DGS-1210 Series switches support 8, 16, 24, or 48 10/100/1000BASE-T ports. Inaddition, each switch supports 2 or 4 Gigabit SFP ports for optical connections usingmultimode or singlemode SFP transceivers.

PoE Support

Several models in the DGS-1210 series family support Power-over-Ethernet capabilities,simplifying deployments with IP cameras, VoIP phones, wireless access points, and otherpowered devices. These models include the DGS-1210-10P, DGS-1210-28P and DGS-1210-52MP. Using the switchs management interface, an administrator can control various PoEfunctions, such as remotely rebooting cameras or access points, from anywhere on thenetwork, including over the Internet. The switches also support time-based PoE anoption that allows administrators to set a time window that determines when each portsPoE power is turned on and off.

Energy Saving

The DGS-1210 Series Switches are capable of conserving power withoutsacrificing operational performance or functionality by using D-Link Green3.0 technology. Using the Energy Efficient Ethernet standard, the network willautomatically decrease the power usage when traffic is low. For environmentsnot fully supporting the standard, these switches offer advanced powersavingsettings including port shutoff and standby, LED shutoff, and systemhibernation based on custom time profiles. The time profiles can also be appliedto the PoE switches so that unnecessary power consumption can be savedduring off hours. The switches can also detect the length of connected cables toautomatically reduce power usage on shorter cable connections.

Easy Management

The D-Link Web Smart Switch series is designed for easy management. All configuration can be performed through an intuitive browser-based Graphical User Interface regardless of the host PC’s operating system. The DGS-1210 Series switches also support a D-Link Network Assistant Utility that enables administrators to remotely control their network down to the port level. This utility allows customers to easily discover multiple D-Link Web Smart Switches within the same L2 network segment. With this utility, users do not need to change the IP address of their PC. It also simplifies the initial setup by taking switches, within the same L2 network segment, that are connected to the user’s PC, and displaying them on screen for instant access. This allows extensive switch configuration and basic setup of discovered devices, including password changes and firmware upgrades. In addition, the DGS-1210 Series supports D-View® 6.0 and Compact Command Line Interface (CLI) through Telnet. D-View 6.0 is a network management system that allows for the central management of critical network characteristics such as availability, reliability, resilience, and security.

Auto Surveillance VLAN and Voice VLAN

The D-Link Web Smart series automates the process of setting up IP surveillance and VoIP devices on a network. Auto Surveillance VLAN consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of realtime video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at a high level. Similarly, the Auto Voice VLAN guarantees clear quality and efficient transmission for all voice communication.

Extensive Layer 2 Features

Equipped with a complete lineup of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port and automatically shut down the affected port. The Cable Diagnostic feature designed primarily for administrators and customer service representatives, can rapidly discover the type of error and determine the cable quality.

Secure your Network

D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by Man-in-the-Middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment.

Limited Lifetime Warranty

D-Link offers a Limited Lifetime Warranty on the DGS-1210 Series WebSmart switches to further its commitment to product quality and long-termcustomer confidence.

Specifications

General

Port Standards &Functions

• IEEE 802.3 10BASE-T Ethernet

• IEEE 802.3u 100BASE-TX (Fast Ethernet)

• IEEE 802.3ab 1000BASE-T (Gigabit Ethernet)

• IEEE 802.3x Flow Control for Full-Duplex Mode

• IEEE 802.3af compliance (DGS-1210-28P only)

• Auto-negotiation

Number of Ports

• DGS-1210-10P:

     â€¢ 8 10/100/1000BASE-T PoE

     â€¢ 2 SFP 

Network Cables

• UTP Cat.5, Cat.5e (100m max)

• EIA/TIA-568 100-ohm STP (100m max)

Full/Half Duplex

• Full/half duplex for 10/100Mbps speeds

• Full duplex for Gigabit speed

Media Interface Exchange

• Auto or configurable MDI/MDI-X

Performance

Switching Capacity

• DGS-1210-10P:  40 Gbps

Transmission Method

• Store-and-forward

MAC Address Table

• 16,000 entries per device

MAC Address Update

• Up to 256 static MAC entries

• Enable/disable auto-learning of MAC addresses

Maximum 64 bytes packet forwarding rate

• DGS-1210-10P:  14.88 Mpps

Packet Buffer Memory

• DGS-1210-10P:  1.5 MB

Power over Ethernet - DGS-1210-10P

PoE Standard

• IEEE 802.3af &IEEE 802.3at

PoE Capable Ports

• DGS-1210-10P:  

     â€¢ Ports 1 to 8: Up to 30W

PoE Power Budget

• DGS-1210-10P:  Max. 78W

Physical and Environmental

AC Input

• 100 to 240 VAC 50/60Hz internal universal power supply

Maximum Power Consumption

• DGS-1210-10P:  103.4W (PoE on) / 17.9W (PoE off)

Standby Power Consumption

• DGS-1210-10P:   10.3W/110V, 11.1W/240V

Fan Quantity

• DGS-1210-10:  0

• DGS-1210-10P:  0

• DGS-1210-20:  0

• DGS-1210-28:  0

• DGS-1210-28P:  Two smart fans

• DGS-1210-52:  Two smart fans

• DGS-1210-52MP:

Acoustics

• DGS-1210-10P:  0 dB(A)

Heat Dissipation

• DGS-1210-10P:  352.63 BTU/hr.

Operating Temperature

• 23° to 122°F (-5° to 50°C)

Storage Temperature

• -4° to 158°F (-20° to 70°C)

Operating Humidity

• 0% to 95% non-condensing

Storage Humidity

• 0% to 95% non-condensing

Dimensions

• DGS-1210-10P

     â€¢ 11.02 x 7.08 x 1.73 in. (280 x 180 x 44 mm)

     â€¢ 19-inch standard rack mounting width, 1U height

Weight

• DGS-1210-10P:  3.1 lbs (1.41 kg)

Diagnostic LEDs

• Power (per device)

• PoE Max (per device) (DGS-1210-10P, -28P, -52MP only)

• Link/Activity/Speed (per 10/100/1000Mbps port)

• Link/Activity (per SFP port)

• Fan (per device) (DGS-1210-28P,-52, -52MP only)

• Button to switch LED display mode between PoE and Link/Activity (DGS-1210-10P, -28P, -52MP only)

MTBF

• DGS-1210-10P:  315,336 hours

Certifications

• FCC Class A

• CE Class A

• ICES-003

• VCCI Class A

• C-Tick

• BSMI

Safety

• cUL

• CE LVD

Software Features

L2 Features

• MAC Address Table

     â€¢ 16K entries

• IGMP Snooping

     â€¢ IGMP v1/v2 Snooping

     â€¢ Supports 256 IGMP groups

     â€¢ Supports at least 64 static multicast addresses

     â€¢ IGMP per VLAN

     â€¢ Supports IGMP Snooping Querier

• Loopback Detection

• 802.3ad Link Aggregation:

     â€¢ DGS-1210 28/28P: Maximum of 14 groups/8 ports per group

     â€¢ DGS-1210 52/52MP: Maximum of 26 groups/8 ports per group

     â€¢ DGS-1210 -10/10P: Maximum of 5 groups/8 ports per group

• LLDP

• LLDP-MED

• Jumbo Frame

     â€¢ Up to 9,216 bytes

• Spanning Tree Protocol

     â€¢ 802.1D STP

     â€¢ 802.1w RSTP

• Flow Control

     â€¢ 802.3x Flow Control

     â€¢ HOL Blocking Prevention

• Port Mirroring

     â€¢ One-to-One

     â€¢ Many-to-One

     â€¢ Supports Mirroring for Tx/Rx/Both

• Multicast Filtering

     â€¢ Forwards all unregistered groups

     â€¢ Filters all unregistered groups

• Configurable MDI/MDIX

     â€¢ MLD snooping v1/v2 (256 groups)

VLAN

• 802.1Q

• VLAN Group

     â€¢ Max. 256 static VLAN groups

• Configurable VID from 1 - 4094

• Asymmetric VLAN

• Auto Voice VLAN

     â€¢ Max. 10 user-defined OUI

     â€¢ Max. 8 default OUI

• Auto Surveillance VLAN

QoS (Quality of Service)

• 802.1p Quality of Service

• 8 queues per port

• Queue Handling

     â€¢ Strict

     â€¢ Weighted Round Robin (WRR)

• Bandwidth Control

     â€¢ Port-based (Ingress/Egress, min granularity 10/100/1000 is 64 Kbps)

• QoS based on:

     â€¢ 802.1p Priority Queues

     â€¢ DSCP

     â€¢ ToS

     â€¢ IPv6 Traffic Class

     â€¢ TCP/UDP port

L3 Features 

• IP Interface

     â€¢ Supports 1 interface

• IPv6 Neighbor Discovery (ND)

Access Control List (ACL)

• Max. 50 access list

• Max. 768 rules shared by IPv4, MAC and IPv6

• Each rule can only be associated with a single port

• ACL based on

     â€¢ 802.1p priority

     â€¢ VLAN

     â€¢ MAC address

     â€¢ Ether type

     â€¢ IP address

     â€¢ DSCP

     â€¢ Protocol type

     â€¢ TCP/UDP port number

     â€¢ IPv6 Traffic Class

Security

• Broadcast/Multicast/Unicast Storm Control

• D-Link Safeguard Engine

• DHCP Server Screening

• IP-MAC-Port Binding (Smart Binding)

     â€¢ Supports 512 address binding entries

     â€¢ ARP Inspection

     â€¢ ARP + IP Inspection

     â€¢ Supports DHCP Snooping

• 802.1X Port-based Access Control

• ARP Spoofing Prevention

     â€¢ Max. 64 entries

• Traffic Segmentation

• SSH v2

• SSL

     â€¢ Supports v1/v2/v3

• Port Security

     â€¢ Supports up to 64 MAC addresses per port

• Duplicate address detection

AAA

• 802.1X Authentication

     â€¢ Supports local/RADIUS database

     â€¢ Supports port-based access control

     â€¢ Supports EAP, OTP, TLS, TTLS, PEAP

• IPv6 RADIUS Server

• Support MD5 authentication

MIB/RFC Standards

• RFC 783 TFTP

• RFC 951 BootP/DHCP Client

• RFC 1157 SNMP v1, v2, v3

• RFC 1213 MIB II

• RFC 1215 MIB Traps Convention

• RFC 1350 TFTP

• RFC 1493 Bridge MIB

• RFC 1769 SNTP

• RFC 1542 BootP/DHCP Client

• RFC 1901 SNMP v1, v2, v3

• RFC 1907 SNMP v2 MIB

• RFC 1908 SNMP v1, v2, v3

• RFC 2131 BootP/DHCP Client

• RFC 2138 RADIUS Authentication

• RFC 2139 RADIUS Authentication

• RFC 2233 Interface Group MIB

• RFC-2246 SSL

• RFC 2475

• RFC 2570 SNMP v1, v2, v3

• RFC 2575 SNMP v1, v2, v3

• RFC 2598 CoS

• RFC 2618 RADIUS Authentication

• RFC 2819 RMON v1

• RFC 2865 RADIUS Authentication

• RFC 3164 System Log

• RFC 3195 System Log

• RFC 3411-17 SNMP

• D-Link Private MIB

• LLDP MIB

• Zone Defense MIB

• 2233 Interface Group MIB

OAM

• Cable Diagnostics

• Factory Reset

Management

• Web-based GUI

• D-Link Network Assistant Utility

• Compact CLI

• Telnet Server

• TFTP Client

• Configurable MDI/MDIX

• SNMP

     â€¢ Supports v1/v2c/v3

• SNMP Trap

• Backup/Upgrade firmware

• Smart Wizard

• Upload/Download Configuration file

• System Log

     â€¢ Max. 500 log entries

• BootP/DHCP Client

• SNTP

• ICMP v6

• IPv4/v6 Dual Stack

• DHCP Auto Configuration

• Time Setting

     â€¢ SNTP

• RMONv1

• Trusted Host

Green v3.0 Technology

• Power Saving by:

     â€¢ Link Status

     â€¢ Time-based PoE: PoE ports can be turned on/off by port or system through schedule

     â€¢ LED Shutoff

     â€¢ System Hibernation

     â€¢ Port Shutoff

Warranty Information

• Warranty

• Limited Lifetime