SATA - M2 SSD Adapter
ADM2SAHDD
This Addonics SATA - M2 SSD adapter enable connecting the M2 SSD to any SATA port inside a computer. Once the M2 (NGFF) SSD is mounted inside this SATA - M2 SSD adapter, it can be used just like a standard 7 mm or 9 mm 2.5" SATA hard drive to direct replace the 2.5" hard drive in Notebook or any computing equipment. The SATA - M2 SSD adapter is a simple economical solution to replace a mechanical hard drive with a low power, shock resistant and high performance Solid State Drive.
The adapter can accommodate M2 (NGFF) SSD in length of 30, 42, 60 and 80 mm.
M2 (NGFF) SSD installation
( a 42 mm length M2 SSD is shown for illustration purpose and is not part of the adapter)
Features
- Connect M2 SSD into any SATA port
- Support M2 (NGFF) in length of 30, 42, 60 and 80 mm
- Supports dual-sided SSD module with1.5mm component height on the top and bottom side
- Replace any SATA hard drive with low power and shock resistant M2 (NGFF) SSD
- Can be used as a direct replacement of the Notebook SATA hard drive (7 mm or 9 mm height)
- M2 (NGFF) flash Card can be the primary bootable device containing the OS and applications
- High current power regulator onboard to ensure reliable operation of large capacity high performance NGFF media
- Industrial operating temperature: -40 C to + 85 C
- OS independent. No software driver required
Specifications
- 22-pin SATA and power combo connector (same as on 2.5" SATA hard drive)
- SATA Hot-swappable support when connected to SATA port supporting such feature
- Maximum transfer rate: 6 Gbps. Actual speed depends on the speed of the M2 (NGFF) SSD
- 1 M2 (NGFF) card connector plus one mounting pole
- Mounting pole can be moved to lock down media in the length of 30, 42, 60 and 80 mm
- Power: +5V from PC power supply
- Maximum Current: ~50 mA at 5V (without the flash media)
- High current power regulator onboard to ensure reliable operation of large capacity high performance NGFF media
- Industrial operating Temperature: -40 C to + 85 C
- Operating Humidity: 5% - 95% (non condensing)
- Storage Temperature: -40 C to + 85 C
- Storage Humidity: 5% - 95%
- Warranty: One Year
