All stock codes associated to this product
GLCFE100LXRGD, GLC-FE-100LX-RGD, 2984407
CISCO (GLC-FE-100LX-RGD) 100MBPS SINGLE MODE RUGGED SFP
GLC-FE-100LX-RGD
Product Overview
The Cisco 100BASE-X Small Form-Factor Pluggable (SFP) device (Figure 1) is a hot-swappable input/output device that plugs into Fast Ethernet ports, dual-rate Fast/Gigabit Ethernet ports, or Gigabit Ethernet ports of a Cisco switch or router, linking the port with the fiber cabling network.
Main features include the following:
- Hot-swappable when deployed, the switch or router does not have to reboot
- Supports the pay-as-you-populate model
- Interchangeable with other 100BASE-X SFPs on the same line card
- Supports the Cisco quality ID feature that enables the switch or router to identify whether or not the SFP is a Cisco qualified SFP
- Optically interoperable with respective 100BASE-X Ethernet interfaces on the same link
Cisco 100BASE-FX SFP
The Cisco 100BASE-FX SFP operates on ordinary multimode fiber-optic (MMF) link spans up to 2 kilometers (km) long.
GLC-FE-100FX modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco switches and routers.
GLC-FE-100FX-RGD modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco Industrial Ethernet and SmartGrid switches and routers.
GLC-GE-100FX modules operate in Gigabit Ethernet ports of Cisco switches and routers.
All these modules are interoperable with industrywide interfaces compliant to the IEEE 100BASE-FX standard.
Cisco 100BASE-LX10 SFP
The Cisco 100BASE-LX10 SFP operates on ordinary single-mode fiber-optic (SMF) link spans up to 10 km long.
GLC-FE-100LX modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco switches and routers.
GLC-FE-100LX-RGD modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco Industrial Ethernet and SmartGrid switches and routers.
These modules are interoperable with industrywide interfaces compliant to the IEEE 100BASE-LX10 standard.
Cisco 100BASE-BX10 SFP
The Cisco 100BASE-BX10 (part numbers GLC-FE-100BX-D and GLC-FE-100BX-U) SFPs operate on ordinary SMF single-strand link spans up to 10 km long. A 100BASE-BX10-D device is always connected a 100BASE-BX10-U device with a single strand of standard SMF with an operating transmission range up to 10 km. The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices as depicted in Figure 2. 100BASE-BX10-D transmits a 1550-nm channel and receives a 1310-nm signal, whereas a 100BASE-BX10-U transmits a 1310-nm wavelength and receives a 1550-nm signal. Note in Figure 2 the presence of a wavelength-division multiplexing (WDM) splitter integrated into the SFP to split the 1310-nm and 1550-nm light paths.
Figure 2. Bidirectional Transmission on a Single Strand of SMF
Cisco 100BASE-EX SFP
The Cisco 100BASE-EX SFP operates on ordinary SMF link spans up to 40 km long.
GLC-FE-100EX modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco switches and routers.
Cisco 100BASE-ZX SFP
The Cisco 100BASE-ZX SFP operates on ordinary SMF link spans up to 80 km long.
GLC-FE-100ZX modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco switches and routers.
Technical Specifications
Platform Support
The Cisco SFPs are supported across a variety of Cisco switches, routers, and optical transport devices. For more details, refer to the document Cisco 100M Ethernet SFP Compatibility Matrix.
Connectors and Cabling
Connectors: Dual LC connector (GLC-FE-100FX, GLC-FE-100FX-RGD, GLC-GE-100FX, GLC-FE-100LX, GLCFE-100LX-RGD, GLC-FE-100EX, and GLC-FE-100ZX) or single LC connector (GLC-FE-100BX-D and GLCFE-100BX-U)
Table 1 provides cabling specifications for the SFPs for installation in a Fast Ethernet SFP port. Note that all SFP ports have LC-type connectors, and the minimum cable distance for all SFPs listed (MMF and SMF [G.652]) is 2 meters (6.5 fee
t).
Table 1. SFP Port Cabling Specifications
|
SFP
|
Wavelength (nm)
|
Fiber Type
|
Cable Distance
|
|
GLC-FE-100FX
GLC-FE-100FX-RGD
GLC-GE-100FX
|
1310
|
MMF
|
2 km (6,562 ft)
|
|
GLC-FE-100LX
GLC-FE-100LX-RGD
|
1310
|
SMF
|
10 km (32,810 ft)
|
|
GLC-FE-100BX-U
|
1310
|
SMF
|
10 km (32,810 ft)
|
|
GLC-FE-100BX-D
|
1550
|
SMF
|
10 km (32,810 ft)
|
|
GLC-FE-100EX
|
1310
|
SMF
|
40 km (131,240 ft)
|
|
GLC-FE-100ZX
|
1550
|
SMF
|
80 km (262,480 ft)
|
Table 2 gives information about fiber loss.
Table 2. Fiber-Loss Budgets
|
SFP
|
Type
|
Transmit (dBm)
|
Receive (dBm)
|
|
Maximum
|
Minimum
|
Maximum
|
Minimum
|
|
GLC-FE-100FX
GLC-FE-100FX-RGD
GLC-GE-100FX
|
100BASE-FX
|
-14
|
-20
|
-14
|
-31
|
|
GLC-FE-100LX
GLC-FE-100LX-RGD
|
100BASE-LX10
|
-8
|
-15
|
-8
|
-28
|
|
GLC-FE-100BX-U
|
100BASE-BX10-U
|
-8
|
-14
|
-3
|
-28.2
|
|
GLC-FE-100BX-D
|
100BASE-BX10-D
|
-8
|
-14
|
-3
|
-28.2
|
|
GLC-FE-100EX
|
100BASE-EX
|
0
|
-5
|
-8
|
-28
|
|
GLC-FE-100ZX
|
100BASE-ZX
|
2
|
-3
|
-8
|
-30
|
Dimensions
Dimensions (H x W x D): 8.5 x 13.4 x 56.5 mm
Environmental Conditions and Power Requirements
Operating temperature range:
- Commercial temperature range (COM): 0 to 70C (32 to 158F), applicable to GLC-FE-100FX, GLCFE-100LX, GLC-GE-100FX, GLC-FE-100BX-D, GLC-FE-100BX-U, GLC-FE-100EX, and GLCFE100ZX
- Industrial temperature range (IND): -40 to 85C (-40 to 185F), applicable to GLC-FE-100FX-RGD and GLC-FE-100LX-RGD
Storage temperature range: -40 to 85C (-40 to 185F)
Power consumption:
- GLC-FE-100FX, GLC-FE-100FX-RGD, GLC-FE-100BX-D, GLC-FE-100BX-U, GLC-FE-100EX, and GLC-FE-100ZX modules consume up to 1W per port
- GLC-GE-100FX modules typically consume 1.5W per port (up to 1.7W)
Warranty
Standard warranty: 90 days
Extended warranty (option): Available under a Cisco SMARTnet Support contract for the Cisco switch or router chassis
Ordering Information
Table 3 gives ordering information for the Cisco SFP.
Table 3. Ordering Cisco SFP
|
Product Number
|
SFP
|
|
GLC-FE-100FX
|
100BASE-FX SFP for Fast Ethernet SFP Ports
|
|
GLC-FE-100FX-RGD
|
100BASE-FX Rugged SFP for Fast Ethernet SFP Ports
|
|
GLC-GE-100FX
|
100BASE-FX SFP for Gigabit Ethernet SFP Ports
|
|
GLC-FE-100LX
|
100BASE-LX10 SFP for Fast Ethernet SFP Ports
|
|
GLC-FE-100LX-RGD
|
100BASE-LX10 Rugged SFP for Fast Ethernet SFP Ports
|
|
GLC-FE-100BX-U
|
100BASE-BX10-U SFP for Fast Ethernet SFP Ports
|
|
GLC-FE-100BX-D
|
100BASE-BX10-D SFP for Fast Ethernet SFP Ports
|
|
GLC-FE-100EX
|
100BASE-EX for Fast Ethernet SFP Ports
|
|
GLC-FE-100ZX
|
100BASE-ZX for Fast Ethernet SFP Ports
|
Regulatory and Standards Compliance
Safety
Laser Class 1 21CFR1040 LN#50 7/2001
Laser Class I IEC 60825
Standards
IEEE 802.3u
IEEE 802.3z
IEEE 802.3ah
GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable
GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies
GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors
RoHS 5
Networking
