All stock codes associated to this product
AP8453, 2770791, 731304317555
Metered-by-Outlet Rack PDU
Rack PDU 2G, Metered-by-Outlet, ZeroU, 32A, 230V, (21) C13 & (3) C19
APC Metered-by-Outlet Rack PDU, Input: 200V, 208V, 230V, Input Connections: IEC 309 32A 2P+E, Cord Length:10 feet ( 3.05 meters ), Output: 230V, Output Connections: IEC 320 C13,IEC 320 C19
Includes: CAN Port Terminator, Installation guide, Rack Mounting brackets, Safety guide, Serial configuration cable
Product Overview
AP8453 Features
Metering-by-Outlet capability
Individual outlet level power metering provides a more granular view of the power distributed to equipment within the enclosure. It also provides the ability to analyze component power trends and perform capacity planning.
Metered-by-Outlet Rack PDU Features & Benefits
Metering-by-Outlet capability
Individual outlet level power metering provides a more granular view of the power distributed to equipment within the enclosure. It also provides the ability to analyze component power trends and perform capacity planning.
Network Management Capabilities
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Alarm Thresholds
Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)
Local Current Monitoring Display
The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)
Load indicator LED
Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits. (Note: Only available with units with local current monitoring feature)
Flash Upgradeable
Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
Integrates with StruxureWare Data Center Expert
An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
Single input power source
Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.
Specifications
Nominal Output Voltage
230V
Maximum Total Current Draw per Phase
32A
Output Connections
(21) IEC 320 C13 |
|
(3) IEC 320 C19 |
|
Nominal Input Voltage
200V, 208V, 230V
Acceptable Input Voltage
220-240VAC
Maximum Line Current per phase
32A
Maximum Input Current per phase
32A
Shipping Height
2037.00mm
Operating Environment
-5 - 45C
Operating Relative Humidity
5 - 95%
Operating Elevation
0-3000meters
Storage Temperature
-25 - 65C
Storage Relative Humidity
5 - 95%
Storage Elevation
0-15000meters
Regulatory Approvals
EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, VDE
Standard Warranty
2 years repair or replace
REACH
REACH: Contains No SVHCs
Battery Directive
Compliant
Battery Notes
Contains Lithium Coin Cell