Alloy GCR2000SFP Gigabit Standalone/Rackmount Media Converter

 

 

A GCR2000 Series Gigabit Ethernet Media Converter, the GCR2000SFP can be used as a standalone device or installed in an Alloy DCR12 Series Media Converter Chassis. This Converter has 1x RJ-45 and 1x SFP slot that accepts any type of mini-GBIC module.

 

The GCR2000SFP is a dual purpose Gigabit Ethernet Media Converter. It can be used as a standalone discrete device, or can be installed as a Media Converter Module into any Alloy 12-slot Media Converter Chassis. Whichever mode the GCR2000SFP is used in, it is a highly flexible solution for media conversion applications in Gigabit Ethernet network environments. With a IEEE 802.3ab compliant 1000Base-T auto-sensing 10/100/1000Mbps RJ-45 port and a SFP slot that accepts any standards-based mini-GBIC Transceiver Module, the GCR2000SFP is an ideal solution for any type of UTP/STP copper to Gigabit Ethernet multimode, singlemode or singlemode WDM media conversion task. The devices RJ-45 port supports Gigabit, Fast Ethernet and Ethernet UTP/STP links at up to a 100 metres range, and maximum fibre cable ranges are determined by the user's selection of mini-GBIC module (Alloy's range of mini-GBIC transceiver module includes models supporting up to 120 kilometres range - see the link below for details of our mini-GBIC products).

 

The GCR2000SFP is a model from Alloy's GCR2000 Series of Dual Purpose Media Converters. As mentioned above, these converters can be used 'standalone' or installed in an Alloy DCR12 Series Media Converter chassis. Models in the series support most types of Gigabit media conversion, including 10/100/1000Mbps RJ-45 copper to 1000Base-SX multimode fibre (with either LC or SC connectors, maximum fibre cable range of 550 metres), 10/100/1000Mbps RJ-45 copper to 1000Base-LX singlemode fibre (LC or SC connectors for 10 or 30Km ranges), 10/100/1000Mbps RJ-45 copper to 1000Base-ZX singlemode fibre (LC or SC connectors for 50Km ranges), 10/100/1000Mbps RJ-45 copper to 1000Base-LX WDM singlemode/singlecore fibre (SC connectors with 20Km range, with send and receive datastreams mutliplexed over a single fibre core), and 10/100/1000Mbps RJ-45 copper to SFP providing support for any type of Gigabit Ethernet copper to multimode, singlemode or singlemode WDM application available via the installation of a mini-GBIC module. All models in the range are housed in a compact, highly durable all-metal case.

 

When used in 'standalone' mode as a discrete Media Converter device, all models in the GCR2000 Series can be powered either by an external plugpack (supplied with the Converter), or via a supplied USB cable which can derive power from any v1.1, v2 or V3 USB port. All GCR2000 Series models have four LEDs that monitor the operation status of the Converter, and also a DIP Switch array on the rear panel which are used to manually set LFP status (see below) and the configuration for Jumbo frame support (normal or cut-through). The RJ-45 port on all models are IEEE 802.3ab, auto-sensing MDI/MDIX, with speed, duplex mode and DTE/DCE mode automatically sensed and set.

 

A particular feature to note for all GCR2000 Series Gigabit Ethernet Media Converters is their support for Link Fault Passthrough (LFP) in both Far-end-Fault (FEF) and Forced Modes (FM). LFP allows these Media Converters to monitor both the fibre and copper RX ports for signal loss. In the case of a loss of RX signal on one media port, the Converter will automatically disable the TX signal to the other media port, thus passing through the link fault LED status. FEF mode enables the Converter to stop sending a link pulse to a LFP capable Converter on the other end of the cable; the link partner Converter will synchronously stop sending data, preventing loss of valuable data transmitted over an invalid link. Combining FM and FEF LFP functions supports troubleshooting and network security capability, as both end devices can be notified of a loss of fibre link and a managed switch connected to a GCR2000 Series Converter can be configured to disable the link and notify administrators of the event.

 

 

GCR2000SFP model: flexible Gigabit copper to SFP (mini-GBIC) fibre media conversion
Dual Purpose GCR2000 Series - use 'standalone' or install in a DCR12 Series Media Converter Chassis
GCR2000 Series: Gigabit Ethernet copper to multimode, singlemode, WDM and SFP Media Conversion solutions
LC and SC fibre connectors supported on individual GCR2000 Series models
Up to 50 kilometres fibre range supported with fixed port MGCR2000 Series Converters
Up to 120 kilometres fibre range supported by MGCR2000SFP Converter
Easy 'Slide-in, Hot Swap' installation into DCR12 Media Converter Chassis systems
Supports Forced and Far-end Fault mode Link Fault Passthrough (LFP)
All GCR2000 models powered by external plugpack or via USB connection
Compact, rugged all-metal case

 

Use as a 'Standalone' discrete Media Converter device or
Install as a Media Converter Module in to any DCR12 Series Media Convert Chassis

Converters installed in slots 1 to 12 of any DCR12 Series Media Converter Chassis
Any mix of GCR2000 Series Converters can be used as Modules plus
FCR200, ECR10, ACR and SCR Converters can also be used as modules in DCR12 Chassis
All Converter Series types are 'slide-in, Hot Swap' field/user upgradable devices

GCR2000SFP: 1Gbps; 1000Base-T RJ-45 (100m max) to SFP with user's choice of mini-GBIC module installed

GCR2000LC: 1Gbps; 1000Base-T RJ-45 (100m) to 1000Base-SX with LC connector, 550m
GCR2000SC: 1Gbps; 1000Base-T RJ-45 (100m) to 1000Base-SX with SC connector, 550m
GCR2000LC.10: 1Gbps; 1000Base-T RJ-45 (100m) to 1000Base-LX with LC connector, 10Km
GCR2000SC.10: 1Gbps; 1000Base-T RJ-45 (100m) to 1000Base-LX with SC connector, 10Km
GCR2000LC.30: 1Gbps; 1000Base-T RJ-45 (100m) to 1000Base-LX with LC connector, 30Km
GCR2000SC.30: 1Gbps; 1000Base-T RJ-45 (100m) to 1000Base-LX with SC connector, 30Km
GCR2000LC.50: 1Gbps; 1000Base-T RJ-45 (100m) to 1000Base-ZX with LC connector, 50Km
GCR2000SC.50: 1Gbps; 1000Base-T RJ-45 (100m) to 1000Base-ZX with SC connector, 50Km
GCR2000S3.20: 1Gbps; 1000Base-T RJ-45 (100m) to 1000Base-LX WDM, singlecore SC, 1310nm Tx, 20Km
GCR2000S5.20: 1Gbps; 1000Base-T RJ-45 (100m) to 1000Base-LX WDM, singlecore SC, 1550nm Tx, 20Km

1000Mbps: 1,488,000pps
100Mbps: 148,800pps
10Mbps: 14,880pps

1000Base-T Ports
Auto-Negotiation
Auto-MDIX
Transmission, Gigabit Ethernet: Full-Duplex only
Transmission, Fast/Ethernet: Full-Duplex oor Half-Duplex
Flow Control: Gigabit - Full-Duplex only; Fast/Ethernet - flow control for Full-Duplex, backpressure for Half-Duplex

 

Auto-Negotiation
Transmission: Full-Duplex only
Flow Control: with NWay Full-Duplex only
Wavelength: 850nm

Auto-Negotiation
Transmission: Full-Duplex
Flow Control: with NWay Full-Duplex only
Wavelength: 1310nm (plus multiplexed 1550nm with WDM models)

Auto-Negotiation
Transmission: Full-Duplex
Flow Control: with NWay Full-Duplex only
Wavelength: 1550nm (plus multiplexed 1550nm with WDM models)
Cable Types Supported
UTP or STP copper: CAT5 or higher
Multimode fibre: 62.5/125µm, 50/125µm recommended (other grades may be used)
Singlemode/WDM fibre: 9/125mm recommended (other grades may be used)

LFP Forced and Far End Fault modes supported
Default configuration - ON
DIP switch for LFP ENABLE/DISBALE manual selection

Supported for 1000Base-T/1000Base-X operation
9K packet size
DIP switch to ENABLE/DISBALE 'Cut Through' or buffered 'Store & Forward' mode selection

Case: compact all-metal enclosure

Power - Green; when lit +5V power is coming up
TP Link/Act - Green; when lit TP connection good, blinks when traffic present
FX Link/Act - Green; when lit connection good, blinks when traffic present
TP 10/100/1000 - Green/Amber; Green - 1000Base-T active. Green - 100Base-TX active. Off - 10Base-T active.

Power Requirement : 1A@+5VDC
USB Power: 0.5A@+5VDC from USB port
Power Consumption: 2.0W max. (model dependent)
Ambient Temperature : 0° to 50°C
Humidity : 5% to 90%
Dimensions : 26.2(H) x 94(L) x 70.3(W) mm

Complies with FCC Part 15 Class A, CE Mark Approval, C-Tick

Standards Compliance
IEEE 802.3ab 1000Base-T specification
IEEE 802.3z 1000Base-X specificatio
1000Base-SX/LX/ZX Gigabit Ethernet fibre specifications
IEEE 802.3u 100Base-TX specification
IEEE 802.3 10Base-T specification
IEEE 802.3x full-duplex flow control specification