All stock codes associated to this product
AF24HD, AF-24-HD, NHUAF24HD, NHU-AF-24-HD, 810354025297, 817882026499
Overview
- Featuring our INVICTUS custom silicon for 2+ million packets-per-second
processing, the airFiber24HD is ideal for outdoor, PtP bridging and backhaul
applications requiring maximum performance.
Up to 20 Gbps Aggregate Performance* and Sub-Millisecond Latency with World's
Best Unlicensed-Band 15.9 bps/Hz Spectral Efficiency.
*airFiber is used as a backhaul serving thousands of
basestations.
Performing as a carrier-class network backhaul, airFiber delivers robust FDD
performance in full-duplex mode with 0.2 millisecond latency.
Spectral Efficiency Breakthrough
airFiber implements the most efficient use of unlicensed-band spectrum - a
vital attribute in increasingly crowded RF environments. By employing a unique
dual-antenna design and proprietary self-interference cancellation algorithms,
airFiber extracts more usable channels out of the available spectrum than any
other comparable radio system. airFiber's built-in configuration tool guides the
selection of RF channel bandwidths, transmit power, and other parameters to
minimize interference potential and optimize link budgets.
Innovative Design, RF Agility
airFiber provides unparalleled flexibility, allowing independently
selectable, asymmetric TX/RX channel bandwidths and selectable TX/RX frequencies
wherever spectrum is available and without being locked into predetermined FDD
channel pairs. Split-frequency TDD operation facilitates maximum versatility in
avoiding interference in today's crowded bands. Channel width flexibility allows
you to independently configure TX and RX channel widths (10/20/30/40/50 MHz) and
place them anywhere within the radio band to suit your link.
Powerful Multi-Mode Duplexing
airFiber supports all duplexing modes: TDD, FDD, and Ubiquiti's patented HDD
- no other radio system provides this level of flexibility. Ubiquiti's
proprietary protocol enables time-synchronous packet transmission, resulting in
the lowest possible, sub-millisecond latency - vital for backhaul
performance.
Line-Rate Packet Processing
Ubiquiti's custom silicon, our proprietary INVICTUS core communications
processing engine, powers airFiber to process 2+ million packets per
second.
Clean Power Output
Using digital pre-distortion compensation and multi-IFFT processing,
airFiber delivers the cleanest output spectrum for unlicensed-band radio
systems. This reduces the potential impact on the RF noise environment and
allows for the use of higher-order modulation, such as 1024QAM.
20 Gbps Aggregate Performance
airFiber operates as a high-performance wireless backhaul; its
GPS-synchronized framing support enables up to 20 Gbps of aggregate throughput
for thousands of basestations.
|
Specifications |
|
|
Operating Frequency |
24.05 - 24.25 GHz |
|
Dimensions |
593 x 768 x 370 mm (23.35 x 30.24 x 14.57") |
|
Weight |
17.3 kg (38.14 lb) Mount Included |
|
Max. Power Consumption |
50 W |
|
Power Supply |
50V, 1.2A PoE GigE Adapter (Included) |
|
Power Method |
Passive Power over Ethernet |
|
Supported Voltage Range |
42-58VDC |
|
Certifications |
CE, FCC, IC |
|
Wind Loading |
770 N @ 200 km/hr (170 lbf @ 125 mph) |
|
Wind Survivability |
200 km/hr (125 mph) |
|
Mounting |
Pole Mount Kit (Included) |
|
Operating Temperature |
-40 to 55° C (-40 to 131° F) |
|
LEDs |
(8) Status LEDs: |
|
|
Data Port Speed |
|
|
Data Port Link/Activity |
|
|
Configuration Port Speed |
|
|
Configuration Port Link/Activity |
|
|
GPS Synchronization |
|
|
Modulation Mode |
|
|
Master/Slave |
|
|
RF Status |
|
|
(1) Two-Digit LED Display Calibrated in dBm |
|
|
|
|
Interface |
|
|
Data Port |
(1) 10/100/1000 Ethernet Port |
|
Configuration Port |
(1) 10/100 Ethernet Port |
|
Auxiliary Port |
(1) RJ-12, Alignment Tone Port |
|
|
|
|
System |
|
|
Maximum Throughput |
2 Gbps |
|
Maximum Range |
20+ km |
|
Packets per Second |
> 1 Million |
|
Encryption |
128-Bit AES |
|
Uplink/Downlink Ratio |
50% Fixed |
Networking
