All stock codes associated to this product
PE6108GAXG, PE6108G-AX-G, KVAPE6108, KVA-PE6108, 4710423777620
Aten PE6108GG 15A/10A 8-Outlet Metered & Switched Eco PDU - 1U
Rackmount
- 8 outlets
- 15A (UL derated 12A) / 10A
- PDU Power Measurement
The PE6108 eco PDU is intelligent PDUs that contains 8 AC outlets and is
available in various IEC or NEMA socket configurations. It provides secure,
centralized, intelligent, power management (power on, off, cycle) of data center
IT equipment (servers, storage systems, KVM switches, network devices, serial
data devices, etc.), as well as the ability to monitor the center's health
environment via sensors*.
The eco PDUs offer remote power control combined with real-time power
measurement - allowing you to control and monitor the power status of devices
attached to the PDUs at the PDU device level from practically any location via a
TCP/IP connection.
The eco PDU supports any 3rd party v3 SNMP Manager Software and The eco
Sensors (Energy Management Software). The eco Sensors provides you with an easy
method for managing multiple devices, offering an intuitive and user-friendly
Graphical User Interface that allows you to configure a PDU device and monitor
power status of the equipment connected to it. With ALTUSEN eco Sensors, the
Sensor-enabled eco PDU also offers comprehensive power analysis reports which
can separate by departments and locations, providing precise measurements of
current, voltage, power and watt-hour in a real-time display.
With its advanced security features and ease of operation, the eco PDU is the
most convenient, most reliable, and most cost effective way to remotely manage
power access for multiple computer installations and allocate power resources in
the most efficient way possible.
*Sensors are optional accessories. A sensor-enabled installation is required
to generate a more complete energy-efficient data and chart. Higher sensor
installation density is helpful to generate more accurate data.
Package Contents
- 1x PE6108 Power Distribution Unit
- 1x Power Cord
- 1x Rack Mount Kit
- 1x Software CD
- 1x User Instructions
Power Distribution
- Space saving 1U rack mount design with rear mounting
- IEC or NEMA outlet models
- 3 digit 7-segment front panel LED shows Current / IP Address
- Remote users can monitor outlet status via web pages on their browsers
- Safe shutdown support
- Separate power for the unit's own power and its power outlets. The user
interface is still accessible even when an overload condition trips the
devices' circuit breaker
Remote Access
- Remote power control via TCP/IP and a built in 10/100 Ethernet port
- Network Interfaces: TCP/IP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP, NTP, DNS,
10Base-T/100Base-TX, auto sense, Ping, Telnet
- eco PDU Power Management software – eco Sensors
- Supports SNMP Manager V3
Operation
- Remote power outlet control (On, Off, Power Cycle) by individual outlets
- Power-on sequencing – users can set the power on sequence and delay time
for each port to allow equipment to be turned on in the proper order
- Easy setup and operation via a browser-based user interface
- Multibrowser support (IE, Firefox, Chrome, Safari)
- RTC support to keep the timer running during times of no power.
- Supports up to 8 user and 1 administrator accounts
- Proactive Overload Protection (POP) – automatically powers off outlets
when current overloads to protect operating devices
Management
- Power status measurement at the PDU level
- LED indicators for current and IP address at the PDU device level
- Real-time current, voltage, and kWH displayed in a browsed-based UI for
monitoring at the PDU level
- Current and voltage threshold setting
- Naming support for outlets
- User outlet access assignment on an outlet-by-outlet basis.
- Event logging and syslog support
- Upgradeable firmware
- Multilanguage support: English, German, Traditional Chinese, Simplified
Chinese, Japanese, French, Spanish, Italian
Security
- Two-level password security
- Strong security features include password protection and advanced
encryption technologies – 128 bit SSL
- Remote authentication support: RADIUS
eco Sensors Energy Management Software
- Automatic discovery of all PE devices within the same intranet
- Remote real-time power measurement and monitoring
- Remote real-time power outlet management
- Remote real-time environment sensor monitoring
- Plotting/Monitoring of all PE devices
- Exceed threshold alert through SMTP and Syslog
- Power Analysis Report
Diagram
Specifications
|
Function |
PE6108G |
|
Electrical |
|
|
Nominal Input Voltage |
100 – 240 VAC |
|
Maximum Input Current |
10A Max |
|
Input Frequency |
50-60 Hz |
|
Input Connection |
IEC 60320 C14 |
|
Input Power |
2300 VA(Max) |
|
Outlet Type |
Total: 8 x IEC320 C13 |
|
Nominal Output Voltage |
100 – 240 VAC |
|
Maximum Output Current (Outlet) |
C13: 10A(Max) |
|
Maximum Output Current (Bank) |
10A(Max) |
|
Maximum Output Current (Total) |
10A(Max) |
|
Breakers |
1 x 15A Non-Fuse Breaker |
|
Metering |
Bank level Current, Voltage, VA , PF and KWh
Monitoring |
|
Outlet Switching |
Yes |
|
Environment Sensor Ports |
2 |
|
Metering Accuracy |
Voltage Range: 100VAC ~ 250VAC +/-1% |
|
|
Power Range: 100W ~ Maximum Capacity +/- 2% |
|
|
Current Range: 0.1A~1A +/- 0.1A, 1A~20A +/-1% |
|
|
|
|
Physical Properties |
|
|
Dimensions (L x W x H) |
43.24 x 22.04 x 4.40 cm |
|
|
(17.02 x 8.68 x 1.73 in.) |
|
Weight |
2.77 kg ( 6.1 lb ) |
|
Power Cord Length |
3 m |
|
|
|
|
Environmental |
|
|
Temperature (Operating / Storage) |
0 – 50°C / -20 – 60°C |
|
Humidity (Operating & Storage) |
0 – 80% RH, Non-Condensing |
|
|
|
|
Compliance |
|
|
EMC Verification |
CE, Others by Request |
|
Safety Verification |
TUV-CB, CE-LVD, Others by Request |
|
|
|
|
Note |
For some of rack mount products, please note that the standard physical
dimensions of WxDxH are expressed using a LxWxH
format. |
Networking
