SYS-DL20N | Shuttle XPC slim DL20N Fanless 1-Litre PC

Fanless and silent

• Completely fanless, virtually noiseless
• Passive cooling through convective heat transfer
• Perfect to be used in noise-sensitive environments
• Fanless means less dust and thus virtually no maintenance required

24/7 Nonstop Operation

• This device is approved for 24/7 permanent operation.
• Requirements:
• - Free air circulation around the PC must be guaranteed.
• - Ventilation holes must be kept clear.
• - Any installed disk must also be approved for permanent
• operation by its manufacturer

Chassis

• Slim PC with black chassis made of steel
• Dimensions: 190 x 165 x 43 mm (LWH) = 1.35-litre
• Weight: 0.8 kg net and 1.95 kg gross
• Two holes for Kensington Lock and numerous
• threaded holes (M3) at both sides of the chassis

Operation Position

• 1) Horizontal
• 2) Vertical with mounted feet.
• These feet can be purchased as optional accessory PS02.
• 3) Vertical (e.g. VESA-mounted behind an appropriate monitor)
• In vertical position, the front USB ports should point upward.
• Ventilation holes must not be blocked to ensure sufficient cooling.

Operation System

• This system comes without operating system.
• It is compatible with
• - Windows 10 (64-bit)
• - Windows 11 (64-bit)
• - Linux (64-bit)

Processor

• Intel Celeron Processor N4505, Dual Core
• CPU clock frequency: 2.0 GHz, max. Turbo frequency: 2.9 GHz
• Code name: "Jasper Lake"
• 10 nm structure, FCBGA1338 package (soldered)
• CPU cores / Threads: 2 / 2
• L2 Cache: 4 MB
• Thermal Design Power (TDP): 10 W
• Supports x86-64, AES-NI, VT-x (EPT), VT-d, SSE4.2, AES
• System-on-Chip processor (SoC) with integrated graphics processor, no chipset required

Integrated Graphics

• The Graphics Processing Unit (GPU) is integrated in the processor
• Intel UHD Graphics (11th Gen), GPU frequency: 450~750 MHz
• Supports DirectX 12, OpenGL 4.5, OpenCL 1.2, Intel Quick Sync Video, Intel Clear Video (HD)
• Execution Units (EU): 16
• Triple Display Support via three video outputs:
• - HDMI 2.0b: max. 4096 x 2160 @ 60 Hz
• - DisplayPort 1.4a: max. 4096 x 2160 @ 60 Hz
• - D-Sub/VGA: max. 1920 x 1200 resolution @ 60 Hz
• Supports two digital displays and one analog display simultaneously.
• The D-Sub/VGA connector does not support the Hot Plug feature.

UEFI Firmware

• 16 MB Flash ROM with AMI's Aptio UEFI BIOS Firmware
• Based on the Unified Extensible Firmware Interface (UEFI)
• Supports Power-fail-resume / AC power-on state / always-on / always-off [3]
• Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
• Supports boot up from external flash memory cards
• With embedded Firmware TPM v2.0 (fTPM) [5]
• CMOS battery (type CR2032)

Memory Support

• 2x SO-DIMM slots with 260 pins
• Supports DDR4-2933 (PC4-23466U) SDRAM at 1.2V
• Supports Dual Channel mode
• Supports max. 16 GB per DIMM
• Maximum total size: 16 GB (either 1x 16 GB or 2x 8 GB)
• Supports two unbuffered DIMM modules (no ECC)

2.5" Bay for Hard disk drive/SSD

• Supports one drive in 6.35 cm / 2.5" format (hard disk or SSD)
• Serial ATA III Interface with up to 600 MB/s transfer speed
• Max. height 12.5 mm
• Pre-installed SATA cable (data / power)
• Supports Unified Extensible Firmware Interface (UEFI)

M.2 expansion slot for SSD card

• M.2 2280 BM slot
• Interfaces: PCI-Express Gen. 3.0 X2 and SATA v3.0 (max. 6 Gbit/s)
• Supports M.2 cards with a width of 22 mm
• and a length of 42, 60 or 80 mm (type 2242, 2260, 2280)
• Supports SATA SSDs (BM-Key) or NVMe PCIe SSDs (M-Key)

M.2-2230E slot for WLAN cards

• Interfaces: PCI-Express Gen. 2.0 X1 und USB 2.0
• Supports M.2 cards with a width of 22 mm and a length of 30 mm (type 2230)
• Supports WLAN expansion cards (optional Shuttle accessory: WLN-M / -M1)

Integrated Audio

• Realtek ALC897 / ALC662 / ALC888S Audio Codec
• Two analog audio connectors (3.5 mm):
• 1) Line out (head-phones)
• 2) Microphone input
• Digital multi-channel audio output: via HDMI and DisplayPort

Card Reader

• Integrated card reader
• supports standard SD, SDHC and SDXC memory flash cards
• Controller: Genesys GL9750 SD Host Controller

Wired Network

• RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/s.
• Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
• Supports Wake-on-LAN

LEDs and Buttons

• Power button
• Power LED (blue)
• HDD LED (yellow)

Front Panel Connectors

• 2x USB 3.2 Gen 2 Type A (red)
• SD card reader
• Audio line-out (headphones)
• Microphone input

Back Panel Connectors

• HDMI 2.0b digital video and audio output
• DisplayPort 1.4a digital video and audio output
• D-Sub/ VGA analog video output (15-pin) - no hot plug
• 2x USB 3.2 Gen 1 Type A (blue)
• 2x USB 2.0 Type A
• Gigabit network (LAN, RJ45)
• 2x RS232 serial port, 9-pin D-Sub (support of an auxiliary voltage of 5/12 V,
• the left port is switchable to RS422 / RS485) [4]
• DC input for the external power adapter
• 4-pin connector (2.54 mm pitch) supports
• - external power-on button
• - Clear CMOS function
• - +5V DC voltage for external components
• 2x perforation for optional Wireless LAN antennas

Other Onboard Connectors

• Connectors COM1/COM2 for serial ports (occupied)
• Jumper JP2 for power-on-after-power-fail (hardware solution) [3]
• USB 2.0 header (4-pin) required for WWN03 accessory

Power Supply

• External 40 W AC/DC power adapter (fanless)
• AC Input: 100 ~ 240 V AC, 50 ~ 60 Hz
• DC Output: 19 V / 2.1 A
• Automatic AC voltage adjust
• Dimensions: ca. 95 x 42 x 29 mm (LWH)
• DC cable length: ca. 170 cm
• AC cable length: ca. 170 cm (with 2-pin Europlug)

DC Input connector

• DC Connector: 5.5 / 2.5 mm (outer/inner diameter)
• The DC-input of the computer supports an external power source
• with either 12 V 5% (max. 2.1 A) or 19 V 5% (max. 3.33 A).

Supplied Accessories

• Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC)
• VESA mount for 75 / 100 mm standard (two metal brackets)
• Four screws M3 x 5 mm (screws together VESA mount and PC)
• Four screws M4 x 10 mm (to affix VESA mount on the PC)
• Four screws M3 x 4 mm (to mount a 2.5" storage into the bay)
• Two screws M3 x 5 mm (to mount some M.2 cards)
• Driver DVD (Windows 64-bit)
• External 40 W power adapter with power cord (Europlug)

Optional Accessories:

• - PS02: optional stand for vertical operation
• - CXP01: adapter cable for external power button
• - PRM01: 2U rack-mount front plate for two Shuttle XPC slim PCs
• - DIR01: DIN-Rail mounting kit
• - WLN-M/-M1. WLAN module in M.2-2230 format with two external antennas supports WLAN and Bluetooth.
• - WWN03: LTE kit with adapter card, 2 antennas and antenna cables. Supports one M.2 LTE module and one nano SIM card [1]

Environmental Specifications

• Operating temperature range: 0 ~ 40 C
• Relative humidity range: 10 ~ 90 % (non-condensing)

Certification and Compliance

• EMI: FCC, CE, BSMI, RCM, VCCI
• Safety: CB, BSMI, ETL
• Other: RoHS, Energy Star, ErP
• This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
• (1) 2004/108/EC relating to electromagnetic compatibility (EMC),
• (2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
• (3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)