All stock codes associated to this product
POE200SC.20, POE200SC20, NHAPOE200SC.20, NHA-POE200SC.20
ALLOY POE200SC.20 PoE PSE Fast Ethernet Media Converter
Overview
The POE200SC.20 Fast Ethernet PoE Media Converter, a POE200 Series model, has
a 10/100Mbps PoE RJ-45 port and a SC terminated singlemode fibre port. It is
used to power PoE PD devices such as IP Phones and support copper-to-fibre
100Mbps conversion.
The POE200SC.20 Fast Ethernet PoE Media Converter is a dual purpose device.
It supports media conversion applications between Fast Ethernet 10/100Base-TX
over UTP/STP copper cable and SC terminated 100Base-FX over singlemode fibre
cable, supporting ranges of up to 20 kilometres. The device also supports IEEE
802.3af compliant Power over Ethernet (PoE) applications, and can be used to
power PD (Powered Device) PoE equipment such as IP phones and IP cameras via UTP
or STP data cable.
The POE200SC.20 is a model from Alloy's POE200 Series of PoE Media
Converters. As a Media Converter, models in the series support most types of
Fast Ethernet copper-to-fibre media conversion, including 10/100Mbps RJ-45
copper to 100Base-FX multimode fibre (with either LC, SC or ST connectors,
maximum link range of 2 kilometres) and 10/100Mbps RJ-45 copper to 100Base-FX
singlemode fibre (SC connectors for 20 or 40Km ranges).
The PoE capability of POE200 Series Media Converters is comprehensive; as a
PSE device, all models support signature sensing, power monitoring functions
including PD discovery, classification and current limiting, PD power-out
auto-detection, PD over and under current power protection, fault protection
input, minimum load sensing and PSE MDI power enable / disable. All models
automatically discover PD PoE devices, power them over UTP data cable to a
maximum of 15.4 watts, monitor power supply, indicate operating and fault status
via a comprehensive LED suite, and protect from power faults. POE200 Series
Converters also support Link Fault Passthrough via Far-end-Fault (FEF) mode. LFP
allows POE200 Series Media Converters to monitor both the fibre and copper RX
ports for signal loss. In the case of a loss of RX signal on one media port, the
Converter will automatically disable the TX signal to the other media port, thus
passing through the link fault LED status. FEF mode enables the Converter to
stop sending a link pulse to a LFP capable Converter on the other end of the
cable; the link partner Converter will synchronously stop sending data,
preventing loss of valuable data transmitted over an invalid
link.
Features
- Power PoE PD devices such as IP Phones, IP Cameras over UTP data
cable
- IEEE 802.3af PoE (Power over Ethernet) PSE compliant
- Comprehensive PoE functions: PD Signature Sensing, power monitoring and
current protection
- Supports Fast Ethernet copper-to-fibre mutimode or singlemode media
conversion
- 10/100Mbps auto-negotiation on RJ-45 copper port
- Maximum fibre link ranges: 40kms
- LC, SC and ST fibre port connector models
- Far-End-Fault and Forced mode LFP supports easy link fault monitoring and
auto link
shutdown
Networking
