All stock codes associated to this product
GS305P-300AUS, GS305P300AUS
| Performance |
|---|
| Packet buffer memory | 0.128 MB |
| Mean time between failures (MTBF) | 3222482 h |
| Fanless | Yes |
| Power |
|---|
| Power connector | DC-in jack |
| Power consumption (max) | 60 W |
| Input current | 1.25 A |
| DC input voltage | 48 V |
| Power source | DC |
| Management features |
|---|
| Switch type | Unmanaged |
| Quality of Service (QoS) support | Yes |
| Ports & interfaces |
|---|
| Basic switching RJ-45 Ethernet ports quantity | 5 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Power connector | DC-in jack |
| Network |
|---|
| Cable length detection | Yes |
| Networking standards | IEEE 802.1p, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x |
| Full duplex | Yes |
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
| Auto MDI/MDI-X | Yes |
| 10G support | No |
| Half duplex | Yes |
| Data transmission |
|---|
| Jumbo frames | 9216 |
| MAC address table | 2000 entries |
| Switching capacity | 10 Gbit/s |
| Jumbo frames support | Yes |
| Packet buffer memory | 0.128 MB |
| Forwarding rate | 1.448 Mpps |
| Security |
|---|
| MAC address filtering | Yes |
| Queue scheduling algorithms | Weighted Round Robin (WRR) |
| Design |
|---|
| Wall mountable | Yes |
| Product colour | Black |
| Housing material | Metal |
| Power over Ethernet (PoE) |
|---|
| Power over Ethernet (PoE) power per port | 15.4 W |
| Power over Ethernet (PoE) | Yes |
| Power over Ethernet (PoE) ports quantity | 4 |
| Total Power over Ethernet (PoE) budget | 55 W |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 40 °C |
| Storage temperature (T-T) | -20 - 70 °C |
| Storage relative humidity (H-H) | 5 - 95% |
| Operating altitude | 0 - 3000 m |
| Heat dissipation | 205.2 BTU/h |
| Weight & dimensions |
|---|
| Width | 158 mm |
| Depth | 101 mm |
| Height | 29 mm |
| Weight | 410 g |
| Other features |
|---|
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
ETHERNET PORT CONFIGURATION 5 Gigabit ports
PLUG-AND-PLAY Simple set up with no software to install or configuration needed and zero maintenance
FULL PERFORMANCE Non-blocking switching architecture for maximum throughput at wire speed
POWER-OVER-ETHERNET 4 PoE ports with 55W total power budget to power wireless AP, IP Cameras, IP Phones and much more
PoE POWER AUTO-BALANCE AND ALLOCATION NETGEAR's unique PoE technology automatically balances the PoE power at the most granular level on each port, depending on the device needs.
SILENT OPERATION The fanless design means zero added noise wherever its located, making it ideal for noise-sensitive environments
ENERGY EFFICIENT Designed to optimize power usage lowering its cost to operate.
Metal Case Durable and Rugged
VERSATILE MOUNTING OPTIONS Supports desktop and wall placement. Includes wall mount kit in the box
STANDARDS-BASED DESIGN Ensure interoperability with any standards-based PDs
Networking
