All stock codes associated to this product
AASACFBKW
AASACFBKW
As an advance addition to our popular IDE CF adapter, this Addonics SATA CF adapter is one of the fastest CF Readers/Writers in the market today. Connect directly to the fast SATA port, this adapter supports direct booting from the CF media as well as hot swapping* of the CF media without restarting the system. Comes bundled with 3.5" bay bracket, a standard height and a low profile PCI slot mounting brackets, the SATA can be installed practically into any system. The versatility and the fast performance of this adapter make it an ideal CF read/write device for many industrial PCs, embedded systems or various vertical applications.
Key Features
- Compatible with CFI/II and Micro Drive
- Supports connection to Port Multiplier or Hardware Port Multiplier
- SATA or SATA II or SATA III interface
- LED indicator for both power and data access
- Mount in standard height PCI slot, low profile PCI slot, standard 3.5" drive bay (or 5 1/4" drive bay with optional bay converter, AAMK53)
- Choice of black or ivory color bay bracket
- Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes.
- Bootable*
- Hot swappable**
- Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000, XP, Vista, Windows 7, Mac, Linux
*while the SATA to CF Adapter is known to be bootable, only certain types of CF cards will be capable of booting off this adapter. A Transcend 2GB Industrial Compact Flash with UDMA Fixed Disk Mode feature was used to do a fresh install and tested to successfully boot Windows XP Media Center 2005 under 40 seconds.
**hot swap function depends on the SATA controller. Some early SATA controllers do not support hot swap. Please confirm with your controller supplier. If you need to add a SATA controller, we recommend using one of Addonics SATA controllers of which are all based on Silicon Image chip set.
note: there are reports that an incompatibility issue arises when the SATA CF adapter is used with the Intel D945 series motherboard.
Booting Operating Systems off a Compact Flash Card
Specifications
Interface:
|
SATA |
| Supported media |
Type I/II CF, Micro Drive |
| Maximum Read / Write Speed: |
Depends on the media |
| OS Support: |
DOS, Windows 3.1, NT, 98SE, Me, 2000, XP, Vista, Windows 7 |
| Dimensions: |
adapter (the control board only): 2.8 x 2.2 x .35 in (71 x 56 x 9 mm)
3.5" bay frame: 4.02 x 3.82 x 1 in (102 x 97 x 25 mm) |
| Power: |
+5V from PC power supply |
| LED indicator |
Power and data access |
| Operating Temperature |
Operating Humidity: |
Storage Temperature: |
-40 C to + 85 C |
| Storage Humidity: |
5% - 95% |
| Warranty: |
One Year |
