|
|
200.00x150.00x86.00(mm) 7.87x5.91x3.39(inch) |
|
|
VOLTAGE:90~264VACFULLRANGE FREQUENCY:47~63Hz INPUTCURRENT:9.0A@115V;5A@230VAC INRUSHCURRENT:35A@115V;75A@230VAC |
|
|
|
|
|
Output Voltage |
Output Current Min. |
Output Current Max. |
Output Current Peak |
Regulation Load |
Regulation Line |
Output Ripple & Noise Max.[P-P] |
+5V |
1 |
32.00 |
|
5% |
1% |
50mV |
|
|
|
|
|
|
REMARKS: 1.TOTAL OUTPUT OF +5V & +3.3V NOT EXCEED 190W 2.TOTAL OUTPUT POWER NOT EXCEED 800W |
* TEMPERATURE RANGE: OPERATING 0 --- 40, STORAGE 20 --- 80 * HOLD UP TIME: DC OUTPUT 12V MUST BE MAINTAIN 16 ms IN REGULATION LIMIT AT NORMAL INPUT VOLTAGE * EFFICIENCY: TYPICAL >80% AT 115V, 25%~100% MAX LOAD * POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms * OVER POWER PROTECTION: 100~160% * OVER VOLTAGE PROTECTION: +5V5.7~6.5V, +3.3V3.9~4.7V, +12V13.3~14.3V * OVER CURRENT PROTECTION: +3.3V35.2~51.2A, +5V35.2~51.2A, +12V71.5~104A * SHORT CIRCUIT PROTECTION: +12V, -12V, +5VSB * EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B * FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL * SAFETY: TO MEET UL, TUV IEC-60950, RFI/EMI STANDARDS * REMOTE ON/OFF CONTROL * COOLING: TWO 40 mm DC FANS (MODULE)
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
|
|
|
|