Locking cabinet - Prevents unauthorized access to the UPS.
Smart-UPS VT Features & Benefits
Availability
Dual mains input - Increases availability by allowing the UPS to be connected to two separate power sources.
Scalable runtime - Allows additional run time to be quickly added as needed.
Hot-swappable batteries - Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Generator compatible - Ensures clean, uninterrupted power to protected equipment when generator power is used.
Automatic internal bypass - Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
Battery modules connected in parallel - Delivers higher availability through redundant batteries.
Serviceability
User-replaceable batteries - Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Battery replacement without tools - Allows quick, easy battery replacement.
Automatic self-test - Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Shippable with modules installed - Enables pre-installation UPS staging and testing and faster installation.
Modular design - Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Manageability
Network manageable - Provides remote management of the UPS over the network.
InfraStruXure Manager Compatible - Enables centralized management via the APC InfraStruXure Manager.
LCD display - Alpha-Numeric Display which displays system parameters and alarms.
Audible alarms - Provides notification of changing utility power and UPS conditions
Programmable frequency - Ensures compatibility with different input frequencies.
LED status indicators - Quickly understand unit and power status with visual indicators.
SmartSlot - Customize UPS capabilities with management cards.
Total Cost of Ownership
Input power factor correction - Minimizes installation costs by enabling the use of smaller generators and cabling.
Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.
Manual maintenance bypass - Reduces installation costs by eliminating the need for an external mechanical bypass.
Intelligent battery management - Maximizes battery performance, life, and reliability through intelligent, precision charging.
Protection
Frequency and voltage regulation - Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Safety-agency approved - Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Cold-start capable - Provides temporary battery power when the utility power is out.
Specifications
Output
Output Power Capacity
24kW /30 kVA
Max Configurable Power
24kW /30 kVA
Nominal Output Voltage
230V,400V 3PH
Output Voltage Note
Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Efficiency at Full Load
96%
Output Voltage Distortion
Less than 5% at full load
Output Frequency (sync to mains)
47 - 53 Hz for 50 Hz nominal
Output Connections
| (1) Hard Wire 5-wire (3PH + N + G) |
|
| (12) IEC 320 C19 |
 |
Overload Operation
60 seconds @ 125% and 30 seconds @ 150%
Bypass
Built-in Maintenance Bypass,Built-in Static Bypass
Input
Nominal Input Voltage
400V 3PH
Input Frequency
40 - 70 Hz
Input Connections
| Hard Wire 5-wire (3PH + N + G) |
|
Input voltage range for main operations
304 - 477V
Other Input Voltages
380,415
Maximum Input Current
41A
Input Breaker Capacity
63.0A
Batteries & Runtime
Included Battery Modules
5
Typical recharge time
3hour(s)
Replacement Battery
SYBT4
Extended Run Options
APC Smart-UPS VT rack mounted 30kVA 400V w/5 batt mod., w/PDU & startup
Communications & Management
Interface Port(s)
DB-9 RS-232,SmartSlot
Pre-Installed SmartSlot Cards
AP9631
Control panel
Multi-function LCD status and control console
Audible Alarm
Audible and visible alarms : configurable delays
Emergency Power Off (EPO)
Yes
Physical
Shipping Height
1995.00mm
Color
Black
Environmental
Operating Environment
0 - 40C
Operating Relative Humidity
0 - 95%
Operating Elevation
0-999.9meters
Storage Temperature
-50 - 40C
Storage Relative Humidity
0 - 95%
Storage Elevation
0-15000meters
Audible noise at 1 meter from surface of unit
67.00dBA
Online Thermal Dissipation
3685.00BTU/hr
Protection Class
IP 20
Conformance
Regulatory Approvals
C-tick,CE,EN 50091-2,EN/IEC 62040-3,IEC 61000-3-2,IEC 61000-3-3,ISO 14001,ISO 9001,VFI-SS-112
Standard Warranty
1 year repair or replace,Start-Up Service
**The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full load rating of the UPS.
