Please choose carefully, we are unable to refund or exchange for incorrect choice. ECC memory is generally system/server specific and we recommend the use of our Kingston memory selector to ensure compatibility
All stock codes associated to this product
KVR16E11K4/32, 740617209075
KVR16E11K4/32
32GB (8GB 2Rx8 1G x 72-Bit x 4 pcs.)
PC3-12800 CL11 ECC 240-Pin DIMM Kit
DESCRIPTION
ValueRAM's KVR16E11K4/32 is a kit of four 1G x 72-bit (8GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 2Rx8, ECC memory modules, based on eighteen 512M x 8-bit FBGA components per module. Total kit capacity is 32GB. The SPDs are programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. Each 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
FEATURES
- JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
- VDDQ = 1.5V (1.425V ~ 1.575V)
- 800MHz fCK for 1600Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 11, 10, 9, 8, 7, 6
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or
MRS]
- Bi-directional Differential Data Strobe
- Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
- On Die Termination using ODT pin
- On-DIMM thermal sensor (Grade B)
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- Asynchronous Reset
- PCB : Height 1.180” (30.00mm), double sided component
Specifications:
- CL(IDD): 11 cycles
- Row Cycle Time (tRCmin): 48.125ns (min.)
- Refresh to Active/Refresh: 260ns (min.)
- Command Time (tRFCmin)
- Row Active Time (tRASmin): 35ns (min.)
- Maximum Operating Power: 2.902 W* (per module)
- UL Rating: 94 V - 0
- Operating Temperature: 0o C to 85o C
- Storage Temperature: -55o C to +100o C
Power will vary depending on the SDRAM used.
