All stock codes associated to this product
HX421S13IB/8, 740617242478
HX421S13IB/8
8GB 1G x 64-Bit DDR4-2133
CL13 260-Pin SODIMM
DESCRIPTION
HyperX HX421S13IB/8 is a 1G x 64-bit (8GB) DDR4-2133 CL13 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit DDR4 FBGA components. Each module supports Intel Extreme Memory Profiles (Intel XMP) 2.0. This module has been tested to run at DDR4-2133 at a low latency timing of 13-13-13 at 1.2V. Additional timing parameters are shown in the PnP Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:
Note: The PnP feature offers a range of speed and timing options to support the widest variety of processors and chipsets. Your maximum speed will be determined by your BIOS.
PnP JEDEC TIMING PARAMETERS:
JEDEC/PnP: DDR4-2133 CL13-13-13 @1.2V
XMP Profile #1: DDR4-2133 CL13-13-13 @1.2V
FEATURES
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD = 2.25V to 3.6V
On-Die termination (ODT)
16 internal banks; 4 groups of 4 banks each
Bi-Directional Differential Data Strobe
8 bit pre-fetch
Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
Height 1.18 (30.00mm)
SPECIFICATIONS
CL(IDD): 13 cycles
Row Cycle Time (tRCmin) 46.5ns (min.)
Refresh to Active/Refresh 260ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 33ns (min.)
Maximum Operating Power TBD W*
UL Rating: 94V - 0
Operating Temperature: 0oC to 85C
Storage Temperature: -55C to + 100C