All stock codes associated to this product
TLB1262X2, TL-B126-2X2
2x2 HDMI over Cat5/Cat6 Matrix Splitter Switch, Transmitter for Video and Audio, 1920x1200 1080p at 60Hz
- Extend HDMI up to 175ft ( 1080i )
- Switch input sources via Push-button, Remote, or RS232 serial
- HDCP compatible
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Tripp Lite B126-2X2 allows two HDMI video sources ( DVR, Cable box, etc ) to be shared among multiple monitors, over ordinary Cat5e/Cat6 cable. When used with Tripp LiteActive HDMI receivers, can extend a 1080P signal up to 125ft, and 1080i up to 175ft. Allows any Input to be routed to any Output; or the same Input to be routed to multiple outputs. Two monitors can be supported with the basic switch...further expand the range and number of monitors by adding B126-110 remote repeater units. Switch is HDCP compliant, and is Plug-and-Play...no software or drivers required. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Key Features
Share multiple HDMI sources between multiple monitors
Allows any input to be routed to any output; or the same input to be routed to multiple outputs
Transmits the signal over one Cat5e/6 cable to a remote monitor up to 175 ft. away
A B126-Series remote receiver is needed at each monitor
For longer distances: Use a B126-1A0 or B126-1A0-WP-1 active remote receiver to extend a 1080p @ 60Hz signal up to 125 ft. from the transmitter (or a 1080i @ 60Hz signal up to 175 ft. from the transmitter)
For shorter distances: Use a B126-1P0 or B126-1P0-WP-1 passive remote receiver to extend a 1080p @ 60Hz signal up to 50 ft. from the transmitter (or a 1080i @ 60Hz signal up to 75 ft. from the transmitter)
Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lites N202-Series, to achieve maximum distance and resolution
Further expand the range and number of monitors by adding B126-110 remote repeater units
Add up to three repeaters on each channel of the matrix switch, for a total of 4 displays per channel (An active remote receiver should be the last unit in a channel)
A 1080p @ 60Hz signal can be extended up to 125 ft. for each repeater added into a channel (or up to 175 ft. for a 1080i @60Hz signal)
Switch between inputs via pushbuttons, remote control,or RS232 serial
HDCP-compatible
Mounting hardware included
Plug-and-play; no software or drivers required
Compatible with all operating systems
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Package Includes
B126-2X2 Transmitter Unit
External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output B126-2X2: 5V, 2A
3.5 mm to DB9 Adapter Cable ( serial )
Mounting Hardware
Remote Control
Owners Manual
OVERVIEW
|
| Chromebook Compatible |
Yes |
| Display Style |
Extender |
| Model Type |
HDMI |
| Cable Types |
CAT5/CAT5E |
PHYSICAL
|
| Unit Dimensions (hwd / in.) |
1.20 x 5.0 x 3.90 |
| Included Mounting Accessories |
Yes |
| Color |
Black |
ENVIRONMENTAL
|
| Operating Temperature Range |
0 to 40 C (32 to 104 F) |
| Storage Temperature Range |
-20 to 60 C (-4 to 140 F) |
| Relative Humidity |
20 to 90% |
CONNECTIONS
|
| Connector A |
HDMI (FEMALE) (X2) |
| Connector B |
RJ45 (FEMALE) (X2) |
This item is a dual transmitter over Cat 5/6.At each of the receiver ends you need one of the following options:
For longer extension distances, use aB126-1A0orB126-1A0-WP-1active receiver:
- A 1080p (60Hz) signal can be transmitted up to 150 ft.
- A 1080i (60Hz) signal can be transmitted up to 200 ft.
- A 3D signal can be transmitted up to 125 ft.
For shorter distances, use aB126-1P0orB126-1P0-WPpassive receiver:
- A 1080p (60Hz) signal can be transmitted up to 50 ft.
- A 1080i (60Hz) signal can be transmitted up to 100 ft.
- Cannot be use for a 3D signal
Further extend the signal range or add more displays by using a Tripp LiteB126-110Remote Repeater unit:
- Add up to three repeaters on each channel of the B126-002 for a total of 4 displays per channel (A receiver should be the last unit in a channel)
- A 1080p (60Hz) signal can be extended up to 125 ft. for each repeater added into a channel
- A 1080i (60Hz) signal can be extended up to 175 ft. for each repeater added into a channel
- A 3D signal can be extended up to 100 ft. for each repeater added into a channel
