SRT2200XLI Features

APC Smart-UPS SRT 2200VA 230V

• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance
• ECO Mode
  Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
• LCD graphics display
  Text and mimic diagrams that display modes of operation, system parameters and alarms.
• Rack/Tower convertible
  Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Smart-UPS On-Line Features & Benefits

Availability

• Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.
• Automatic internal bypass
  Supplies utility power to the connected loads in the event of a UPS power overload or fault.
• Automatic restart of loads after UPS shutdown
  Automatically starts up the connected equipment upon the return of utility power.
• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Scalable runtime
  Allows additional run time to be quickly added as needed.

Manageability

• Network manageable
  Provides remote power management of the UPS over the network.
• SmartSlot
  Customize UPS capabilities with management cards.
• InfraStruXure Manager Compatible
  Enables centralized management via the APC InfraStruXure Manager.
• Serial connectivity
  Provides management of the UPS via a serial port.
• LED status indicators
  Quickly understand unit and power status with visual indicators.

Adaptability

• Flash upgradeable firmware
  Install maintenance releases of firmware remotely using FTP.
• Rack/Tower convertible
  Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
• Plug-and-Play external batteries
  Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Serviceability

• User-replaceable batteries
  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
• Audible alarms
  Provides notification of changing utility power and UPS power conditions
• Disconnected battery notification
  Warns when a battery is not available to provide backup power.
• Predicitive failure notification
  Provides early-warning fault analysis ensuring proactive component replacement.
• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Marketing Features

• Low operating and maintenance costs with proven reliability and intelligent battery management.
  Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
• Save time with easy and convenient remote accessibility.
  Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
• Avoids costly power problems by keeping your IT equipment and data protected and available.
  Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
• Peace of mind that comes with full equipment compatibility and reliability of a leader
  Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Protection

• Frequency and voltage regulation
  Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
• Safety-agency approved
  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
• Resettable circuit breaker
  Easy recovery from overloads; no need to replace a fuse.
• Cold-start capable
  Provides temporary battery power when the utility power is out.
• Generator compatible
  Ensures clean, uninterrupted power to protected equipment when generator power is used.
• Input power factor correction
  Minimizes installation costs by enabling the use of smaller generators and cabling.
• Power conditioning
  Protects connected loads from surges, spikes, lightning, and other power disturbances.

Output

• Output power capacity
  1.98 KWatts / 2.2 kVA
• Max Configurable Power (Watts)
  1.98 KWatts / 2.2 kVA
• Nominal Output Voltage
  230V
• Output Voltage Note
  Configurable for 220 : 230 or 240 nominal output voltage
• Output Voltage Distortion
  Less than 2%
• Output Frequency (sync to mains)
  50/60Hz +/- 3 Hz
• Other Output Voltages
  220, 240
• Load Crest Factor
  3 : 1
• Topology
  Double Conversion Online
• Waveform type
  Sine wave
• Output Connections
  (2) IEC 320 C19 (Battery Backup)

  (8) IEC 320 C13 (Battery Backup)
• Bypass
  Internal Bypass (Automatic and Manual)

Input

• Nominal Input Voltage
  230V
• Input frequency
  40 - 70 Hz (auto sensing)
• Input Connections
  IEC-320 C20, Schuko CEE 7 / EU1-16P, British BS1363A
• Cord Length
  2.44 meters
• Input voltage range for main operations
  160 - 275 V
• Input voltage adjustable range for mains operation
  100 - 275 (half load) V
• Number of Power Cords
  1
• Other Input Voltages
  220, 240

Batteries & Runtime

• Battery type
  Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Included Battery Modules
  1
• Typical recharge time
  3 hour(s)
• RBC Quantity
  1
• Extendable Run Time
  1
• Battery Volt-Amp-Hour Capacity
  367
• Extended Run Options
  APC-Smart-UPS-SRT-2200VA-230V
• Runtime
  View Runtime Graph
  View Runtime Chart
• Efficiency
  View Efficiency Graph

Communications & Management

• Interface Port(s)
  RJ-45 Serial , Smart-Slot , USB
• Control panel
  Multi-function LCD status and control console
• Audible Alarm
  Audible and visible alarms prioritized by severity
• Emergency Power Off (EPO)
  Yes
• Available SmartSlotâ„¢ Interface Quantity
  1

Surge Protection and Filtering

• Surge energy rating
  340 Joules
• Filtering
  --

Physical

• Maximum Height
  432 , 43.2 CM
• Maximum Width
  85 , 8.5 CM
• Maximum Depth
  584 , 58.4 CM
• Net Weight
  25.0 KG
• Shipping weight
  30.84 KG
• Shipping Height
  246 , 24.6 CM
• Shipping Width
  599 , 59.9 CM
• Shipping Depth
  810 , 81.0 CM
• Color
  Black
• Units per Pallet
  12.0

Environmental

• Operating Environment
  0 - 40 °C
• Operating Relative Humidity
  0 - 95% no %
• Operating Elevation
  0-3000 meters
• Storage Temperature
  -15 - 45 °C
• Storage Relative Humidity
  0 - 95% no %
• Storage Elevation
  0-15000 meters
• Audible noise at 1 meter from surface of unit
  55.0 dBA
• Online thermal dissipation
  703.0 BTU/hr
• Protection Class
  IP 20

Conformance

• Approvals
  CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, ENERGY STAR (EU), RCM, VDE
• Standard warranty
  3 years repair or replace (excluding battery) and 2 years for battery