KVR21S15D8/16 | Kingston 16GB (1 x 16GB) PC3-17000 2133MHz DDR3 SODIMM RAM

KVR21S15D8/16
 
16GB 2Rx8 2G x 64-Bit PC4-2133
 
CL15 260-Pin SODIMM 
 
DESCRIPTION 

This document describes ValueRAM's 2G x 64-bit (16GB) DDR4-2133 CL15 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
 
Features

Power Supply: VDD=1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD=2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Dual-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
PCB:  Height 1.18â€� (30.00mm)
RoHS Compliant and Halogen-Free

Specifications

CL(IDD): 15 Cycles

Row Cycle Time (tRCmin): 46.5ns (min.)

Refresh to Active/Refresh, Command Time (tRFCmin): 350ns (min.)

Row Active Time (tRASmin): 33ns (min.) 

Maximum Operating Power: TBD W* 

UL Rating: 94V - 0

Operating Temperature: 0C to +85C

Storage Temperature: -55C to +100C