KVR21E15D8/8HA | Kingston 8GB (1 x 8GB) PC4-17000 2133MHz ECC DDR4 RAM - CL15

Description

This document describes ValueRAM's KVR21E15D8/8HA is a 1G x 72-bit (8GB) DDR4-2133 CL15 SDRAM (Synchronous DRAM), 2Rx8, ECC, memory module, based on eighteen 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

Features

Power Supply: VDD=1.2V Typical

VDDQ = 1.2V Typical

VPP - 2.5V Typical

VDDSPD=2.2V to 3.6V

Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

Low-power auto self refresh (LPASR)

Data bus inversion (DBI) for data bus

On-die VREFDQ generation and calibration

Dual-rank

On-board I2 serial presence-detect (SPD) EEPROM

Temperature sensor with integrated SPD

16 internal banks; 4 groups of 4 banks each

Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

Selectable BC4 or BL8 on-the-fly (OTF)

Fly-by topology

Terminated control command and address bus

PCB: Height 1.23� (31.25mm)

RoHS Compliant and Halogen-Free

Specifications: 

CL(IDD): 15 cycles
Row Cycle Time (tRCmin): 46.5ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin): min
Row Active Time (tRASmin): 33ns(min.)
Maximum Operating Power: 1.447W
UL Rating: 94 V - 0
Operating Temperature: 0o C to +85o C
Storage Temperature:-55o C to +100o C