HX430C15SB2K2/8 | Kingston 8GB (2 x 4GB) PC4-24000 3000MHz DDR4 RAM - CL15

HX430C15SB2K2/8

8GB (4GB 512M x 64-Bit x 2 pcs.)

DDR4-3000 CL15 288-Pin DIMM Kit
 
DESCRIPTION

HyperX HX430C15SB2K2/8 is a kit of two 512M x 64-bit (4GB) DDR4-3000 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory modules, based on eight 512M x 8-bit FBGA components per module. Total kit capacity is 8GB. Each module supports Intel® XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-3000 at a low latency timing of 15-17-17 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:

XMP TIMING PARAMETERS

JEDEC: DDR4-2133 CL15-15-15 @1.2V
XMP Profile #1: DDR4-3000 CL15-17-17 @1.35V
XMP Profile #2: DDR4-2666 CL14-15-15 @1.35V
 
Features

Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD = 2.25V to 3.6V
On-Die termination (ODT)
16 internal banks; 4 groups of 4 banks each
Bi-Directional Differential Data Strobe
8 bit pre-fetch
Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
Height 1.36� (34.57mm)

Specifications

CL(IDD): 15 cycles

Row Cycle Time (tRCmin): 46.5ns (min.)

Refresh to Active/Refresh Command Time (tRFCmin): 260ns (min.)

Row Active Time (tRASmin): 33ns (min.)

Maximum Operating Power: TBD W*

UL Rating: 94 V - 0

Operating Temperature: 0o C to +85o C

Storage Temperature: -55o C to +100o C