|
AR3350W
Features |
|
NetShelter SX 42U 750mm
Wide x 1200mm Deep Enclosure with Sides White |
|
Feature-rich rack
enclosure optimized for easy installation, managing cables, integrating
power distribution, and maximizing airflow. |
|
Includes : Baying
hardware , Documentation CD , Key(s) , Keyed-alike doors and side panels ,
Leveling feet , Mounting hardware , Pre-installed casters , Side panels ,
User Manual |
|
NetShelter SX Features
& Benefits |
|
Agility |
|
Pre-installed full-enclosure height rear accessory
channels |
|
Integrated and
adjustable rear accessory channel provides zero U mounting locations for
toolless accessories. Each channel has two mounting bays to support a
combination of up to four accessories such as PDUs and vertical cable
organizers. 1070mm (42in), 825mm (32 in), and deep enclosures and
networking enclosures include two channels. 1200mm (48in) deep enclosures
include four channels. Channels are pre-installed at the factory in the
rear of the enclosure but can be moved to other locations of the enclosure
along the side brace to resituate cable management where it is needed
most. |
|
Adjustable mounting rails with captive hardware and rapid
alignment |
|
The vertical mounting
rails can be adjusted in 1/4 in (6.4 mm) increments covering virtually any
mounting requirement for IT equipment. Easy alignment feature integrated
into the enclosure mounting rail and side brace for quick alignment
verification without the use of tools to verify alignment. U positions are
numbered front and back for rapid installation of
equipment. |
|
Enclosure assemble-to-order (ATO) options
capable |
|
The Enclosure ATO
(Assemble-to-Order) options provide a level of customization for enclosure
customers beyond the standard enclosure models. This customization is
limited to the assembly of the enclosure itself and does not include
additional enclosure mounted components. For example, the enclosure can be
assembled without sides, doors, or without sides and doors. Check apc.com
for enclosure size options and availability. |
|
Integrated joining hardware with multiple width enclosure alignment |
|
Enclosures include
pre-installed joining hardware to join enclosures in a row and provide
additional stability to the enclosure. The pre-installed joining hardware
includes holes for joining to an adjacent enclosure at 600mm centers or
24in centers depending upon the floor layout. |
|
Special packaging options for shipping rack with equipment mounted |
|
Enclosures with shock
packaging are standard enclosures with provisions in the packaging design
and enclosure assembly for shipping the enclosures with equipment mounted
inside. Check apc.com for enclosure size options and
availability. |
|
Split rear doors |
|
Split rear doors
improve access and serviceability to rear of rack mounted equipment. The
split rear doors help to maximize floor space. Only 11 inches (279 mm) of
clearance is required behind the enclosures to allow for door
swing. |
|
Low-profile castors and adjustable leveling feet from underneath or
above |
|
Enclosures are shipped
standard with both leveling feet and castors. Leveling feet can be quickly
adjusted through the use of a screwdriver or drill, eliminating the need
to reach underneath with a wrench. |
|
Safety |
|
Integrated electrical grounding |
|
The roof, side panels
and front and rear doors are grounded to the frame of the enclosure. Eight
additional electrical grounding inserts are located on the frame for
external grounding. |
|
Designed for enhanced structural stability |
|
A proven frame design,
heavy-gauge mounting rails, and heavy-duty casters provide for 3000 lb
(1364 kg) static (levelling feet) and 2250 lb (1023 kg) dynamic (castor)
load ratings. Enclosures have been tested and approved to be combined with
proper bolt down accessories to meet various seismic requirements. Check
apc.com for product documentation for specific
requirements. |
|
Compatibility |
|
Schneider Electric Rack Systems Compatible |
|
Compatible with a
variety of Schneider Electric rack accessory products to provide the
ability to create a complete rack system. Configure rack solutions using
industry leading Schneider Electric Design Portal - Small IT Solution
Designer configurator complete with verification of product compatibility
and useful 3rd party equipment catalog to aid in visualizing your ideal
rack solution. |
|
Integrated with InfraStruxure products |
|
Schneider Electric
cooling, power distribution, and cable management products work seamlessly
with IT enclosures to provide a complete infrastructure support
system. |
|
Optimized for high capacity cable management
systems |
|
NetShelter SX
enclosures are optimized for use with high capacity cable management
systems that attach to equipment mounting rails inside enclosures aligning
with equipment mounting u-spaces and provide channels for routing and
managing cabling. |
|
Vendor-neutral EIA-310 19in Rack Mounting Compatibility Guaranteed |
|
Vendor-neutral mounting
for guaranteed compatibility with all EIA-310 compliant 19" equipment. The
"Fits Like a Glove" money back guarantee provides peace of mind that all
of your EIA-310-E compliant rack-mount equipment will physically fit in a
NetShelter. |
|
Convenience |
|
Cable access openings with pre-installed
brushes |
|
Large cable access
slots in the roof provides access for overhead cable egress. The bottom
design allows for unobstructed cable access through a raised floor. Roof
includes openings with brush strips pre-installed in locations biased
towards the front of the enclosure to allow for data cable passthrough and
provisions for air containment. |
|
Simple Selection |
|
No need to spend hours
choosing from and compiling dozens of part numbers to create a single
enclosure. Schneider Electric has made it easy by handling the details and
providing complete enclosures with single part
numbers. |
|
Perforated front door with curved profile |
|
Perforated front and
rear doors provide ample ventilation for servers and networking equipment.
Front door perforated area is optimized with a curved profile to provide
greater surface area and allowance of more perforation coverage and higher
perforation rating. |
|
Quick release doors |
|
Front door can be moved
to the opposite side or interchanged with rear doors. Doors are easily
removed with simple lift-off design. |
|
Enclosure adjustment tools and hardware
provided |
|
All enclosures are
provided standard with hardware bag that includes hardware for mounting IT
equipment and tools for simple enclosure adjustment. |
|
Half-height side panels and option with brush strips for pass-through |
|
Half-height quick
release side panels reduce size and weight for easy handling and access to
equipment. Side panels are lockable utilizing a single key with the doors.
Now available are side panel options integrated with pass-through holes
and brush strips for routing cabling to adjacent racks in a row while
still maintaining proper airfow. |
|
Easily removable cable access roof |
|
Roof can be removed
with simple pull-pin hinges for access during equipment installation or
even with cabling already in place and routed through the cable openings.
Once removed the roof is reversible to reposition the larger cable
openings for power distribution plugs and connectors. |
|
Eyebolt support integrated into enclosure
frame |
|
Integrated eyebolt
holes at the top of the enclosure frame allow the enclosure to be lifted
for movement and enclosure placement using eyebolt lifting mechanisms.
Refer to enclosure user documentation for detailed specifications on
eyebolt requirements and enclosure weight limits. |
|
Equipment mounting rails integrate with patch cabling
systems |
|
Equipment mounting
rails include zero U mounting holes beside the EIA 19" mounting space that
allow the installation of Data Distribution Cable (DDC) patch systems
without taking up any critical equipment U-space. AV and Networking
enclosure designs do not include hole locations for integration of DDC
cabling. Other 1U, 2U, and rear enclosure zero U options are available for
use with these enclosures. |
|
