KVR21N15S8K2/16 | Kingston 16GB (2x8GB) PC4-2133MHz CL15 DDR4 RAM Memory Kit

Overview

Kingston memory is designed, manufactured and rigorously tested to meet the exact specifications of each brand name system. Its guaranteed to be compatible and backed by a lifetime warranty and legendary Kingston reliability.

Description

ValueRAM's KVR21N15S8K2/16 is a kit of two 1G x 64-bit (8GB) DDR4-2133 CL15 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA components. Total kit capacity is 16GB. The SPD is programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

Features

• Power Supply: VDD=1.2V Typical
• VDDQ = 1.2V Typical
• VPP - 2.5V Typical
• VDDSPD=2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23 (31.25mm)
• RoHS Compliant and Halogen-Free

Specifications

*Power will vary depending on the SDRAM used.