All stock codes associated to this product
KVR24E17D8/16, MEKVR24E17D816, MEKVR24E17D8-16, 740617258912
Description
ValueRAM's KVR24E17D8/16 is a 2G x 72-bit (16GB) DDR4-2400 CL17 SDRAM
(Synchronous DRAM), 2Rx8, ECC, memory module, based on eighteen 1G x 8-bit FBGA
components. The SPD is programmed to JEDEC standard latency DDR4-2400 timing of
17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical
and mechanical specifications are as follows:
Features
- Power Supply: VDD=1.2V Typical
- VDDQ = 1.2V Typical
- VPP - 2.5V Typical
- VDDSPD=2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for data, strobe, and mask
signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Dual-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- Temperature sensor with integrated SPD
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode
register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.23 (31.25mm)
- RoHS Compliant and Halogen-Free
Specifications
CL(IDD) |
: |
17
cycles |
Row Cycle Time
(tRCmin) |
: |
46.16ns(min.) |
Refresh to
Active/Refresh Command Time (tRFCmin) |
: |
350ns(min.) |
Row Active Time
(tRASmin) |
: |
32ns(min.) |
Maximum Operating
Power |
: |
TBD
W* |
UL
Rating |
: |
94 V -
0 |
Operating
Temperature |
: |
0o C to +85o
C |
Storage
Temperature |
: |
-55o C to +100o
C |
*Power
will vary depending on the SDRAM used. |
|
|