All stock codes associated to this product
HX424S14IB2/8, 3650115, 740617268201
Overview
HyperX HX424S14IB2/8 is a 1G x 64-bit (8GB) DDR4-2400 CL14 SDRAM (Synchronous
DRAM) 1Rx8, memory module, based on eight 1G x 8-bit DDR4 FBGA components. Each
module supports Intel Extreme Memory Profiles (Intel XMP) 2.0. This module has
been tested to run at DDR4-2400 at a low latency timing of 14-14-14 at 1.2V.
Additional timing parameters are shown in the PnP Timing Parameters section
below. The JEDEC standard electrical and mechanical specifications are as
follows:
Note: The PnP feature offers a range of speed and timing options to support
the widest variety of processors and chipsets. Your maximum speed will be
determined by your BIOS.
PnP JEDEC TIMING PARAMETERS:
- JEDEC/PnP
- DDR4-2400 CL14-14-14 @1.2V
- DDR4-2133 CL13-13-13 @1.2V
- XMP Profile #1:
- DDR4-2400 CL14-14-14 @1.2V
Features
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP - 2.5V Typical
- VDDSPD = 2.25V to 3.6V
- On-Die termination (ODT)
- 16 internal banks; 4 groups of 4 banks each
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Height 1.18 (30.00mm)
Specifications
CL(IDD) |
14 cycles |
Row Cycle Time (tRCmin) |
45.75ns (min.) |
Refresh to Active/Refresh Command Time
(tRFCmin) |
350ns (min.) |
Row Active Time (tRASmin) |
29.125ns (min.) |
Maximum Operating Power |
TBD W* |
UL Rating |
94 V - 0 |
Operating Temperature |
0 degrees celcius to 85 degrees celcius |
Storage Temperature |
-55 degrees celcius to +100 degrees
celcius |