All stock codes associated to this product
G1118P16250W, G1118P-16-250W, IC30037
IP-COM G1118P-16-250W 16GE+2SFP Ethernet Unmanaged Switch With
16-Port PoE
Overview
- Compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x
and IEEE802.3af/at standards.
- 16 * 100/1000 Mbps Base-T RJ45 ports for data transmission and power
supply,
- 2 * 1000 Mbps Base-X SFP slots.
- 8K MAC address table and MAC address auto-learning.
- IEEE 802.3x-compliant full-duplex ow control and half-duplex backpressure
ow control.
- 36Gbps backplane bandwidth.
- Maximum power consumption of a single port: 30W; Maximum power consumption
of the switch: 250W.
- 4 modes: standard, priority, extend and VLAN.
- Rack mounting.
G1118P-16-250W is a unmanaged PoE switch independently designed by IP-COM.
Compliant with IEEE 802.3af and IEEE 802.3at standards, it can identify
PoE-powered devices intelli-gently. With a maximum PoE power output of 230 W,
and 30 W for a single port, it can supply power hen transmitting data with APs,
IP cameras, and IP phones. The switch supports 4 working modes, including
standard, priority, extend and VLAN modes, is an ideal choice for SMBs, hotels,
schools, factories with video surveillance and wireless networking
require-ments.
Specifications
|
Model |
G1118P-16-250W |
|
Interfaces |
16
* 100/1000 Mbps Base-T RJ45 ports (Data/Power) |
|
2*
1000 Mbps Base-X SFP port |
|
Lightning
protection |
6KV |
|
Forwarding
mode |
Store-and-forward |
|
Switching
capability |
36
Gbps |
|
Packet
forwarding rate |
26.8
Mpps |
|
Buffer |
2M |
|
MAC
address table |
8K |
|
PoE
supply |
Ports
1-16 support standard IEEE802.3af/at 30W output per PoE
port |
|
230W
output of the total PoE Power |
|
Power
consumption |
250W
output the whole device |
|
Input
voltage |
AC:
100-240V~50/60Hz |
|
Dimensions |
440*178.8*44mm |
|
Four
Modes |
Standard: Default
mode of the switch. In this mode, it works as an unmanaged switch;all
ports can communicate with each other
separately. |
|
Priority: In
this mode, port 15,16,SFP1 and SFP2 serve as uplink ports, ports 1 8 serve
as high priority port. All ports can communicate with each other
separately. |
|
Extend: In
this mode, data rate of ports 9 - 14 reduces to 10 Mbps, the maximum
transmission distance can be 250 meters, and all ports can communicate
with each other. |
|
VLAN: In
this mode, ports 1 - 14 of the switch can communicate with port15,16,
SFP1, SFP2 separately, but cannot communicate with each other. You can
enable this mode to reduce broadcast storm and isolate DHCP
broadcast. |
|
Operating
environment |
Operating
Temperature: 0~45
(32~113) |
|
Storage
Temperature: -40~70
(-40~158) |
|
Operating
Humidity: 10%~90% non-condensing |
|
Storage
Humidity: 5%~90% non-condensing |
|
Certificates |
FCC,
CE, RoHS |
Networking
