|
|
276.00x127.00x83.00(mm) 10.87x5.00x3.27(inch) |
|
|
VOLTAGE:90~264VACFULLRANGE. FREQUENCY:47~63Hz. INRUSHCURRENT:40AMAX.FOR115VACPERMODULE 60AMAX.FOR230VACPERMODULE |
|
|
|
|
|
Output Voltage |
Output Current Min. |
Output Current Max. |
Output Current Peak |
Regulation Load |
Regulation Line |
Output Ripple & Noise Max.[P-P] |
+5V |
1 |
45.00 |
|
5% |
1% |
50mV |
|
|
|
|
|
|
* TEMPERATURE RANGE: OPERATING 0 --- 40,STORAGE -20 --- 70 * HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & 90 VAC INPUT VOLTAGE * DIELECTRIC WITHSTANDING: INPUT/OUTPUT 1500 VAC FOR 1 MINUTE INPUT TO FRAM GROUND 1500 VAC FOR 1 MINUTE * EFFICIENCY: 70% TYPICAL, AT FULL LOAD * POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms * OVER LOAD PROTECTION: 110 ~ 160% MAX * OVER VOLTAGE PROTECTION: +5V 5.7V ~ 6.5V, +3.3V 3.9V ~ 4.7V, +12V 13.3V ~ 14.3V * SHORT CIRCUIT: 5V, 12V, 3.3V,AUTO-RECOVERED: 5VSB, -12V * EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B * SAFETY: MEET UL 60950, CSA 60950, TUV EN-60950 * REMOTE ON / OFF CONTROL * FAULTY ALARM METHODS: LED, BUZZER, TTL SIGNAL * 2+1, HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION * MEET IEC-1000-3-2 CLASS D (ACTIVE PFC) * N+1 BALANCE LOAD SHARING DESIGN ON 5/12/3.3V CHANNEL * REMOTE SIGNAL DESIGN * ISOLATION: BUILT-IN THE POWER MODULE * COOLING: TWO 40 mm DC FANS (ONE IN EACH MODULE) |
|
|
|
|